.. _kea-messages:

###################
Kea Messages Manual
###################

Kea is an open source implementation of the Dynamic Host Configuration
Protocol (DHCP) servers, developed and maintained by Internet Systems
Consortium (ISC).

This is the reference guide for Kea version |release|.
Links to the most up-to-date version of this document (in PDF, HTML,
and plain text formats), along with other useful information about
Kea, can be found in ISC's `Knowledgebase <https://kea.readthedocs.io>`_.

Please note that in the messages below, the percent sign ("%") followed by a number is
used to indicate a placeholder for data that is provided by the Kea code during its operation.


.. toctree::
   :numbered:
   :maxdepth: 5

ALLOC
~~~~~

**ALLOC_ENGINE_LEASE_RECLAIMED**

successfully reclaimed lease %1

  This debug message is logged when the allocation engine successfully
  reclaims a lease. The lease is now available for assignment.

**ALLOC_ENGINE_REMOVAL_NCR_FAILED**

sending removal name change request failed for lease %1: %2

  This error message is logged when sending a removal NameChangeRequest
  to DHCP DDNS failed. This NameChangeRequest is usually generated when
  the lease reclamation routine acts upon expired leases. If a lease being
  reclaimed has a corresponding DNS entry it needs to be removed.
  This message indicates that removal of the DNS entry has failed.
  Nevertheless the lease will be reclaimed.

**ALLOC_ENGINE_V4_ALLOC_ERROR**

%1: error during attempt to allocate an IPv4 address: %2

  An error occurred during an attempt to allocate an IPv4 address, the
  reason for the failure being contained in the message.  The server will
  return a message to the client refusing a lease. The first argument
  includes the client identification information.

**ALLOC_ENGINE_V4_ALLOC_FAIL**

%1: failed to allocate an IPv4 address after %2 attempt(s)

  This is an old warning message issued when the allocation engine fails to allocate a
  lease for a client. This message includes a number of lease allocation attempts
  that the engine made before giving up. If the number of attempts is 0 because the
  engine was unable to use any of the address pools for the particular client, this
  message is not logged. Even though, several more detailed logs precede this message,
  it was left for backward compatibility.
  This message may indicate that your address pool is too small for the
  number of clients you are trying to service and should be expanded.
  Alternatively, if the you know that the number of concurrently active
  clients is less than the addresses you have available, you may want to
  consider reducing the lease lifetime. This way, addresses allocated
  to clients that are no longer active on the network will become available
  sooner.

**ALLOC_ENGINE_V4_ALLOC_FAIL_CLASSES**

%1: Failed to allocate an IPv4 address for client with classes: %2

  This warning message is printed when Kea failed to allocate an address
  and the client's packet belongs to one or more classes. There may be several
  reasons why a lease was not assigned. One of them may be a case when all
  pools require packet to belong to certain classes and the incoming packet
  didn't belong to any of them. Another case where this information may be
  useful is to point out that the pool reserved to a given class has ran
  out of addresses. When you see this message, you may consider checking your
  pool size and your classification definitions.

**ALLOC_ENGINE_V4_ALLOC_FAIL_NO_POOLS**

%1: no pools were available for the address allocation

  This warning message is issued when the allocation engine fails to
  allocate a lease because it could not use any configured pools for the
  particular client. It is also possible that all of the subnets from
  which the allocation engine attempted to assign an address lack address
  pools. In this case, it should be considered misconfiguration if an
  operator expects that some clients should be assigned dynamic addresses.
  A subnet may lack any pools only when all clients should be assigned
  reserved IP addresses.
  Suppose the subnets connected to a shared network or a single subnet to
  which the client belongs have pools configured. In that case, this
  message is an indication that none of the pools could be used for the
  client because the client does not belong to appropriate client classes.

**ALLOC_ENGINE_V4_ALLOC_FAIL_SHARED_NETWORK**

%1: failed to allocate an IPv4 address in the shared network %2: %3 subnets have no available addresses, %4 subnets have no matching pools

  This warning message is issued when the allocation engine fails to allocate
  a lease for a client connected to a shared network. The shared network should
  contain at least one subnet, but typically it aggregates multiple subnets.
  This log message indicates that the allocation engine could not find and
  allocate any suitable lease in any of the subnets within the shared network.
  The first argument includes the client identification information. The
  second argument specifies the shared network name. The remaining two
  arguments provide additional information useful for debugging why the
  allocation engine could not assign a lease. The allocation engine tries
  to allocate addresses from different subnets in the shared network, and
  it may fail for some subnets because there are no leases available in
  those subnets or the free leases are reserved to other clients. The
  number of such subnets is specified in the third argument. For other
  subnets the allocation may fail because their pools may not be available
  to the particular client. These pools are guarded by client classes that
  the client does not belong to. The fourth argument specifies the number
  of such subnets. By looking at the values in the third and fourth argument,
  an operator can identify the situations when there are no addresses left
  in some of the pools. He or she can also identify a client classification
  misconfigurations causing some clients to be refused the service.

**ALLOC_ENGINE_V4_ALLOC_FAIL_SUBNET**

%1: failed to allocate an IPv4 lease in the subnet %2, subnet-id %3, shared network %4

  This warning message is issued when the allocation engine fails to allocate
  a lease for a client connected to a subnet. The first argument includes the
  client identification information. The second and third arguments identify
  the subnet. The fourth argument specifies the shared network, if the subnet
  belongs to a shared network.
  There are many reasons for failing lease allocations. One of them may be the
  pools exhaustion or existing reservations for the free leases. However, in
  some cases, the allocation engine may fail to find a suitable pool for the
  client when the pools are only available to certain client classes, but the
  requesting client does not belong to them. Further log messages provide more
  information to distinguish between these different cases.

**ALLOC_ENGINE_V4_DECLINED_RECOVERED**

IPv4 address %1 was recovered after %2 seconds of probation-period

  This informational message indicates that the specified address was reported
  as duplicate (client sent DECLINE) and the server marked this address as
  unavailable for a period of time. This time now has elapsed and the address
  has been returned to the available pool. This step concludes the decline recovery
  process.

**ALLOC_ENGINE_V4_DISCOVER_ADDRESS_CONFLICT**

%1: conflicting reservation for address %2 with existing lease %3

  This warning message is issued when the DHCP server finds that the
  address reserved for the client can't be offered because this address
  is currently allocated to another client. The server will try to allocate
  a different address to the client to use until the conflict is resolved.
  The first argument includes the client identification information.

**ALLOC_ENGINE_V4_DISCOVER_HR**

client %1 sending DHCPDISCOVER has reservation for the address %2

  This message is issued when the allocation engine determines that the
  client sending the DHCPDISCOVER has a reservation for the specified
  address. The allocation engine will try to offer this address to
  the client.

**ALLOC_ENGINE_V4_LEASES_RECLAMATION_COMPLETE**

reclaimed %1 leases in %2

  This debug message is logged when the allocation engine completes
  reclamation of a set of expired leases. The maximum number of leases
  to be reclaimed in a single pass of the lease reclamation routine
  is configurable using 'max-reclaim-leases' parameter. However,
  the number of reclaimed leases may also be limited by the timeout
  value, configured with 'max-reclaim-time'. The message includes the
  number of reclaimed leases and the total time.

**ALLOC_ENGINE_V4_LEASES_RECLAMATION_SLOW**

expired leases still exist after %1 reclamations

  This warning message is issued when the server has been unable to
  reclaim all expired leases in a specified number of consecutive
  attempts. This indicates that the value of "reclaim-timer-wait-time"
  may be too high. However, if this is just a short burst of leases'
  expirations the value does not have to be modified and the server
  should deal with this in subsequent reclamation attempts. If this
  is a result of a permanent increase of the server load, the value
  of "reclaim-timer-wait-time" should be decreased, or the
  values of "max-reclaim-leases" and "max-reclaim-time" should be
  increased to allow processing more leases in a single cycle.
  Alternatively, these values may be set to 0 to remove the
  limitations on the number of leases and duration. However, this
  may result in longer periods of server's unresponsiveness to
  DHCP packets, while it processes the expired leases.

**ALLOC_ENGINE_V4_LEASES_RECLAMATION_START**

starting reclamation of expired leases (limit = %1 leases or %2 milliseconds)

  This debug message is issued when the allocation engine starts the
  reclamation of the expired leases. The maximum number of leases to
  be reclaimed and the timeout is included in the message. If any of
  these values is 0, it means "unlimited".

**ALLOC_ENGINE_V4_LEASES_RECLAMATION_TIMEOUT**

timeout of %1 ms reached while reclaiming IPv4 leases

  This debug message is issued when the allocation engine hits the
  timeout for performing reclamation of the expired leases. The
  reclamation will now be interrupted and all leases which haven't
  been reclaimed, because of the timeout, will be reclaimed when the
  next scheduled reclamation is started. The argument is the timeout
  value expressed in milliseconds.

**ALLOC_ENGINE_V4_LEASE_RECLAIM**

%1: reclaiming expired lease for address %2

  This debug message is issued when the server begins reclamation of the
  expired DHCPv4 lease. The first argument specifies the client identification
  information. The second argument holds the leased IPv4 address.

**ALLOC_ENGINE_V4_LEASE_RECLAMATION_FAILED**

failed to reclaim the lease %1: %2

  This error message is logged when the allocation engine fails to
  reclaim an expired lease. The reason for the failure is included in the
  message. The error may be triggered in the lease expiration hook or
  while performing the operation on the lease database.

**ALLOC_ENGINE_V4_NO_MORE_EXPIRED_LEASES**

all expired leases have been reclaimed

  This debug message is issued when the server reclaims all expired
  DHCPv4 leases in the database.

**ALLOC_ENGINE_V4_OFFER_EXISTING_LEASE**

allocation engine will try to offer existing lease to the client %1

  This message is issued when the allocation engine determines that
  the client has a lease in the lease database, it doesn't have
  reservation for any other lease, and the leased address is not
  reserved for any other client. The allocation engine will try
  to offer the same lease to the client.

**ALLOC_ENGINE_V4_OFFER_NEW_LEASE**

allocation engine will try to offer new lease to the client %1

  This message is issued when the allocation engine will try to
  offer a new lease to the client. This is the case when the
  client doesn't have any existing lease, it has no reservation
  or the existing or reserved address is leased to another client.
  Also, the client didn't specify a hint, or the address in
  the hint is in use.

**ALLOC_ENGINE_V4_OFFER_REQUESTED_LEASE**

allocation engine will try to offer requested lease %1 to the client %2

  This message is issued when the allocation engine will try to
  offer the lease specified in the hint. This situation may occur
  when: (a) client doesn't have any reservations, (b) client has
  reservation but the reserved address is leased to another client.

**ALLOC_ENGINE_V4_RECLAIMED_LEASES_DELETE**

begin deletion of reclaimed leases expired more than %1 seconds ago

  This debug message is issued when the allocation engine begins
  deletion of the reclaimed leases which have expired more than
  a specified number of seconds ago. This operation is triggered
  periodically according to the "flush-reclaimed-timer-wait-time"
  parameter. The "hold-reclaimed-time" parameter defines a number
  of seconds for which the leases are stored before they are
  removed.

**ALLOC_ENGINE_V4_RECLAIMED_LEASES_DELETE_COMPLETE**

successfully deleted %1 expired-reclaimed leases

  This debug message is issued when the server successfully deletes
  "expired-reclaimed" leases from the lease database. The number of
  deleted leases is included in the log message.

**ALLOC_ENGINE_V4_RECLAIMED_LEASES_DELETE_FAILED**

deletion of expired-reclaimed leases failed: %1

  This error message is issued when the deletion of "expired-reclaimed"
  leases from the database failed. The error message is appended to
  the log message.

**ALLOC_ENGINE_V4_REQUEST_ADDRESS_RESERVED**

%1: requested address %2 is reserved

  This message is issued when the allocation engine refused to
  allocate address requested by the client because this
  address is reserved for another client. The first argument
  includes the client identification information.

**ALLOC_ENGINE_V4_REQUEST_ALLOC_REQUESTED**

%1: trying to allocate requested address %2

  This message is issued when the allocation engine is trying
  to allocate (or reuse an expired) address which has been
  requested by the client. The first argument includes the
  client identification information.

**ALLOC_ENGINE_V4_REQUEST_EXTEND_LEASE**

%1: extending lifetime of the lease for address %2

  This message is issued when the allocation engine determines
  that the client already has a lease whose lifetime can be
  extended, and which can be returned to the client.
  The first argument includes the client identification information.

**ALLOC_ENGINE_V4_REQUEST_INVALID**

client %1 having a reservation for address %2 is requesting invalid address %3

  This message is logged when the client, having a reservation for
  one address, is requesting a different address. The client is
  only allowed to do this when the reserved address is in use by
  another client. However, the allocation engine has
  determined that the reserved address is available and the
  client should request the reserved address.

**ALLOC_ENGINE_V4_REQUEST_IN_USE**

%1: requested address %2 is in use

  This message is issued when the client is requesting or has a
  reservation for an address which is in use. The first argument
  includes the client identification information.

**ALLOC_ENGINE_V4_REQUEST_OUT_OF_POOL**

client %1, which doesn't have a reservation, requested address %2 out of the dynamic pool

  This message is issued when the client has requested allocation
  of the address which doesn't belong to any address pool from
  which addresses are dynamically allocated. The client also
  doesn't have reservation for this address. This address
  could only be allocated if the client had reservation for it.

**ALLOC_ENGINE_V4_REQUEST_PICK_ADDRESS**

client %1 hasn't specified an address - picking available address from the pool

  This message is logged when the client hasn't specified any
  preferred address (the client should always do it, but Kea
  tries to be forgiving). The allocation engine will try to pick an available
  address from the dynamic pool and allocate it to the client.

**ALLOC_ENGINE_V4_REQUEST_REMOVE_LEASE**

%1: removing previous client's lease %2

  This message is logged when the allocation engine removes previous
  lease for the client because the client has been allocated new one.

**ALLOC_ENGINE_V4_REQUEST_USE_HR**

client %1 hasn't requested specific address, using reserved address %2

  This message is issued when the client is not requesting any specific
  address but the allocation engine has determined that there is a
  reservation for this client. The allocation engine will try to
  allocate the reserved address.

**ALLOC_ENGINE_V4_REUSE_EXPIRED_LEASE_DATA**

%1: reusing expired lease, updated lease information: %2

  This message is logged when the allocation engine is reusing
  an existing lease. The details of the updated lease are
  printed. The first argument includes the client identification
  information.

**ALLOC_ENGINE_V6_ALLOC_ERROR**

%1: error during attempt to allocate an IPv6 address: %2

  An error occurred during an attempt to allocate an IPv6 address, the
  reason for the failure being contained in the message.  The server will
  return a message to the client refusing a lease. The first argument
  includes the client identification information.

**ALLOC_ENGINE_V6_ALLOC_FAIL**

%1: failed to allocate an IPv6 lease after %2 attempt(s)

  This is an old warning message issued when the allocation engine fails to allocate a
  lease for a client. This message includes a number of lease allocation attempts
  that the engine made before giving up. If the number of attempts is 0 because the
  engine was unable to use any of the pools for the particular client, this message
  is not logged. Even though, several more detailed logs precede this message, it was
  left for backward compatibility.
  This message may indicate that your pool is too small for the number of clients
  you are trying to service and should be expanded. Alternatively, if the you know
  that the number of concurrently active clients is less than the leases you have
  available, you may want to consider reducing the lease lifetime. This way, leases
  allocated to clients that are no longer active on the network will become available
  sooner.

**ALLOC_ENGINE_V6_ALLOC_FAIL_CLASSES**

%1: Failed to allocate an IPv6 address for client with classes: %2

  This warning message is printed when Kea failed to allocate an address
  and the client's packet belongs to one or more classes. There may be several
  reasons why a lease was not assigned. One of them may be a case when all
  pools require packet to belong to certain classes and the incoming packet
  didn't belong to any of them. Another case where this information may be
  useful is to point out that the pool reserved to a given class has ran
  out of addresses. When you see this message, you may consider checking your
  pool size and your classification definitions.

**ALLOC_ENGINE_V6_ALLOC_FAIL_NO_POOLS**

%1: no pools were available for the lease allocation

  This warning message is issued when the allocation engine fails to
  allocate a lease because it could not use any configured pools for the
  particular client. It is also possible that all of the subnets from
  which the allocation engine attempted to assign an address lack address
  pools. In this case, it should be considered misconfiguration if an
  operator expects that some clients should be assigned dynamic addresses.
  A subnet may lack any pools only when all clients should be assigned
  reserved leases.
  Suppose the subnets connected to a shared network or a single subnet to
  which the client belongs have pools configured. In that case, this
  message is an indication that none of the pools could be used for the
  client because the client does not belong to appropriate client classes.

**ALLOC_ENGINE_V6_ALLOC_FAIL_SHARED_NETWORK**

%1: failed to allocate a lease in the shared network %2: %3 subnets have no available leases, %4 subnets have no matching pools

  This warning message is issued when the allocation engine fails to allocate
  a lease for a client connected to a shared network. The shared network should
  contain at least one subnet, but typically it aggregates multiple subnets.
  This log message indicates that the allocation engine could not find and
  allocate any suitable lease in any of the subnets within the shared network.
  The first argument includes the client identification information. The
  second argument specifies the shared network name. The remaining two
  arguments provide additional information useful for debugging why the
  allocation engine could not assign a lease. The allocation engine tries
  to allocate leases from different subnets in the shared network, and
  it may fail for some subnets because there are no leases available in
  those subnets or the free leases are reserved to other clients. The
  number of such subnets is specified in the third argument. For other
  subnets the allocation may fail because their pools may not be available
  to the particular client. These pools are guarded by client classes that
  the client does not belong to. The fourth argument specifies the number
  of such subnets. By looking at the values in the third and fourth argument,
  an operator can identify the situations when there are no leases left
  in some of the pools. He or she can also identify client classification
  misconfigurations causing some clients to be refused the service.

**ALLOC_ENGINE_V6_ALLOC_FAIL_SUBNET**

%1: failed to allocate an IPv6 lease in the subnet %2, subnet-id %3, shared network %4

  This warning message is issued when the allocation engine fails to allocate
  a lease for a client connected to a subnet. The first argument includes the
  client identification information. The second and third arguments identify
  the subnet. The fourth argument specifies the shared network, if the subnet
  belongs to a shared network.
  There are many reasons for failing lease allocations. One of them may be the
  pools exhaustion or existing reservations for the free leases. However, in
  some cases, the allocation engine may fail to find a suitable pool for the
  client when the pools are only available to certain client classes, but the
  requesting client does not belong to them. Further log messages provide more
  information to distinguish between these different cases.

**ALLOC_ENGINE_V6_ALLOC_HR_LEASE_EXISTS**

%1: lease type %2 for reserved address/prefix %3 already exists

  This debug message is issued when the allocation engine determines that
  the lease for the IPv6 address or prefix has already been allocated
  for the client and the client can continue using it. The first argument
  includes the client identification information.

**ALLOC_ENGINE_V6_ALLOC_LEASES_HR**

leases and static reservations found for client %1

  This message is logged when the allocation engine is in the process of
  allocating leases for the client, it found existing leases and static
  reservations for the client. The allocation engine will verify if
  existing leases match reservations. Those leases that are reserved for
  other clients and those that are not reserved for the client will
  be removed. All leases matching the reservations will be renewed
  and returned.

**ALLOC_ENGINE_V6_ALLOC_LEASES_NO_HR**

no reservations found but leases exist for client %1

  This message is logged when the allocation engine is in the process if
  allocating leases for the client, there are no static reservations,
  but lease(s) exist for the client. The allocation engine will remove
  leases which are reserved for other clients, and return all
  remaining leases to the client.

**ALLOC_ENGINE_V6_ALLOC_NO_LEASES_HR**

no leases found but reservations exist for client %1

  This message is logged when the allocation engine is in the process of
  allocating leases for the client. It hasn't found any existing leases
  for this client, but the client appears to have static reservations.
  The allocation engine will try to allocate the reserved resources for
  the client.

**ALLOC_ENGINE_V6_ALLOC_NO_V6_HR**

%1: unable to allocate reserved leases - no IPv6 reservations

  This message is logged when the allocation engine determines that the
  client has no IPv6 reservations and thus the allocation engine will have
  to try to allocate allocating leases from the dynamic pool or stop
  the allocation process if none can be allocated. The first argument
  includes the client identification information.

**ALLOC_ENGINE_V6_ALLOC_UNRESERVED**

no static reservations available - trying to dynamically allocate leases for client %1

  This debug message is issued when the allocation engine will attempt
  to allocate leases from the dynamic pools.  This may be due to one of
  (a) there are no reservations for this client, (b) there are
  reservations for the client but they are not usable because the addresses
  are in use by another client or (c) we had a reserved lease but that
  has now been allocated to another client.

**ALLOC_ENGINE_V6_DECLINED_RECOVERED**

IPv6 address %1 was recovered after %2 seconds of probation-period

  This informational message indicates that the specified address was reported
  as duplicate (client sent DECLINE) and the server marked this address as
  unavailable for a period of time. This time now has elapsed and the address
  has been returned to the available pool. This step concludes the decline recovery
  process.

**ALLOC_ENGINE_V6_EXPIRED_HINT_RESERVED**

%1: expired lease for the client's hint %2 is reserved for another client

  This message is logged when the allocation engine finds that the
  expired lease for the client's hint can't be reused because it
  is reserved for another client. The first argument includes the
  client identification information.

**ALLOC_ENGINE_V6_EXTEND_ALLOC_UNRESERVED**

allocate new (unreserved) leases for the renewing client %1

  This debug message is issued when the allocation engine is trying to
  allocate new leases for the renewing client because it was unable to
  renew any of the existing client's leases, e.g. because leases are
  reserved for another client or for any other reason.

**ALLOC_ENGINE_V6_EXTEND_ERROR**

%1: allocation engine experienced error with attempting to extend lease lifetime: %2

  This error message indicates that an error was experienced during Renew
  or Rebind processing. Additional explanation is provided with this
  message. Depending on its nature, manual intervention may be required to
  continue processing messages from this particular client; other clients
  will be unaffected. The first argument includes the client identification
  information.

**ALLOC_ENGINE_V6_EXTEND_LEASE**

%1: extending lifetime of the lease type %2, address %3

  This debug message is issued when the allocation engine is trying
  to extend lifetime of the lease. The first argument includes the
  client identification information.

**ALLOC_ENGINE_V6_EXTEND_LEASE_DATA**

%1: detailed information about the lease being extended: %2

  This debug message prints detailed information about the lease which
  lifetime is being extended (renew or rebind). The first argument
  includes the client identification information.

**ALLOC_ENGINE_V6_EXTEND_NEW_LEASE_DATA**

%1: new lease information for the lease being extended: %2

  This debug message prints updated information about the lease to be
  extended. If the lease update is successful, the information printed
  by this message will be stored in the database. The first argument
  includes the client identification information.

**ALLOC_ENGINE_V6_HINT_RESERVED**

%1: lease for the client's hint %2 is reserved for another client

  This message is logged when the allocation engine cannot allocate
  the lease using the client's hint because the lease for this hint
  is reserved for another client. The first argument includes the
  client identification information.

**ALLOC_ENGINE_V6_HR_ADDR_GRANTED**

reserved address %1 was assigned to client %2

  This informational message signals that the specified client was assigned the address
  reserved for it.

**ALLOC_ENGINE_V6_HR_PREFIX_GRANTED**

reserved prefix %1/%2 was assigned to client %3

  This informational message signals that the specified client was assigned the prefix
  reserved for it.

**ALLOC_ENGINE_V6_LEASES_RECLAMATION_COMPLETE**

reclaimed %1 leases in %2

  This debug message is logged when the allocation engine completes
  reclamation of a set of expired leases. The maximum number of leases
  to be reclaimed in a single pass of the lease reclamation routine
  is configurable using 'max-reclaim-leases' parameter. However,
  the number of reclaimed leases may also be limited by the timeout
  value, configured with 'max-reclaim-time'. The message includes the
  number of reclaimed leases and the total time.

**ALLOC_ENGINE_V6_LEASES_RECLAMATION_SLOW**

expired leases still exist after %1 reclamations

  This warning message is issued when the server has been unable to
  reclaim all expired leases in a specified number of consecutive
  attempts. This indicates that the value of "reclaim-timer-wait-time"
  may be too high. However, if this is just a short burst of leases'
  expirations the value does not have to be modified and the server
  should deal with this in subsequent reclamation attempts. If this
  is a result of a permanent increase of the server load, the value
  of "reclaim-timer-wait-time" should be decreased, or the
  values of "max-reclaim-leases" and "max-reclaim-time" should be
  increased to allow processing more leases in a single cycle.
  Alternatively, these values may be set to 0 to remove the
  limitations on the number of leases and duration. However, this
  may result in longer periods of server's unresponsiveness to
  DHCP packets, while it processes the expired leases.

**ALLOC_ENGINE_V6_LEASES_RECLAMATION_START**

starting reclamation of expired leases (limit = %1 leases or %2 milliseconds)

  This debug message is issued when the allocation engine starts the
  reclamation of the expired leases. The maximum number of leases to
  be reclaimed and the timeout is included in the message. If any of
  these values is 0, it means "unlimited".

**ALLOC_ENGINE_V6_LEASES_RECLAMATION_TIMEOUT**

timeout of %1 ms reached while reclaiming IPv6 leases

  This debug message is issued when the allocation engine hits the
  timeout for performing reclamation of the expired leases. The
  reclamation will now be interrupted and all leases which haven't
  been reclaimed, because of the timeout, will be reclaimed when the
  next scheduled reclamation is started. The argument is the timeout
  value expressed in milliseconds.

**ALLOC_ENGINE_V6_LEASE_RECLAIM**

%1: reclaiming expired lease for prefix %2/%3

  This debug message is issued when the server begins reclamation of the
  expired DHCPv6 lease. The reclaimed lease may either be an address lease
  or delegated prefix. The first argument provides the client identification
  information. The other arguments specify the prefix and the prefix length
  for the lease. The prefix length for address lease is equal to 128.

**ALLOC_ENGINE_V6_LEASE_RECLAMATION_FAILED**

failed to reclaim the lease %1: %2

  This error message is logged when the allocation engine fails to
  reclaim an expired lease. The reason for the failure is included in the
  message. The error may be triggered in the lease expiration hook or
  while performing the operation on the lease database.

**ALLOC_ENGINE_V6_NO_MORE_EXPIRED_LEASES**

all expired leases have been reclaimed

  This debug message is issued when the server reclaims all expired
  DHCPv6 leases in the database.

**ALLOC_ENGINE_V6_RECLAIMED_LEASES_DELETE**

begin deletion of reclaimed leases expired more than %1 seconds ago

  This debug message is issued when the allocation engine begins
  deletion of the reclaimed leases which have expired more than
  a specified number of seconds ago. This operation is triggered
  periodically according to the "flush-reclaimed-timer-wait-time"
  parameter. The "hold-reclaimed-time" parameter defines a number
  of seconds for which the leases are stored before they are
  removed.

**ALLOC_ENGINE_V6_RECLAIMED_LEASES_DELETE_COMPLETE**

successfully deleted %1 expired-reclaimed leases

  This debug message is issued when the server successfully deletes
  "expired-reclaimed" leases from the lease database. The number of
  deleted leases is included in the log message.

**ALLOC_ENGINE_V6_RECLAIMED_LEASES_DELETE_FAILED**

deletion of expired-reclaimed leases failed: %1

  This error message is issued when the deletion of "expired-reclaimed"
  leases from the database failed. The error message is appended to
  the log message.

**ALLOC_ENGINE_V6_RENEW_HR**

allocating leases reserved for the client %1 as a result of Renew

  This debug message is issued when the allocation engine tries to
  allocate reserved leases for the client sending a Renew message.
  The server will also remove any leases that the client is trying
  to renew that are not reserved for the client.

**ALLOC_ENGINE_V6_RENEW_REMOVE_RESERVED**

%1: checking if existing client's leases are reserved for another client

  This message is logged when the allocation engine finds leases for
  the client and will check if these leases are reserved for another
  client. If they are, they will not be renewed for the client
  requesting their renewal. The first argument includes the client
  identification information.

**ALLOC_ENGINE_V6_RENEW_REMOVE_UNRESERVED**

dynamically allocating leases for the renewing client %1

  This debug message is issued as the allocation engine is trying
  to dynamically allocate new leases for the renewing client. This
  is the case when the server couldn't renew any of the existing
  client's leases, e.g. because leased resources are reserved for
  another client.

**ALLOC_ENGINE_V6_REUSE_EXPIRED_LEASE_DATA**

%1: reusing expired lease, updated lease information: %2

  This message is logged when the allocation engine is reusing
  an existing lease. The details of the updated lease are
  printed. The first argument includes the client identification
  information.

**ALLOC_ENGINE_V6_REVOKED_ADDR_LEASE**

address %1 was revoked from client %2 as it is reserved for client %3

  This informational message is an indication that the specified IPv6
  address was used by client A but it is now reserved for client B. Client
  A has been told to stop using it so that it can be leased to client B.
  This is a normal occurrence during conflict resolution, which can occur
  in cases such as the system administrator adding a reservation for an
  address that is currently in use by another client.  The server will fully
  recover from this situation, but clients will change their addresses.

**ALLOC_ENGINE_V6_REVOKED_PREFIX_LEASE**

prefix %1/%2 was revoked from client %3 as it is reserved for client %4

  This informational message is an indication that the specified IPv6
  prefix was used by client A but it is now reserved for client B. Client
  A has been told to stop using it so that it can be leased to client B.
  This is a normal occurrence during conflict resolution, which can occur
  in cases such as the system administrator adding a reservation for an
  address that is currently in use by another client.  The server will fully
  recover from this situation, but clients will change their prefixes.

**ALLOC_ENGINE_V6_REVOKED_SHARED_ADDR_LEASE**

address %1 was revoked from client %2 as it is reserved for %3 other clients

  This informational message is an indication that the specified IPv6
  address was used by client A but it is now reserved for multiple other
  clients. Client A has been told to stop using it so that it can be
  leased to one of the clients having the reservation for it. This is a
  normal occurrence during conflict resolution, which can occur in cases
  such as the system administrator adding reservations for an address
  that is currently in use by another client.  The server will fully
  recover from this situation, but clients will change their addresses.

ASIODNS
~~~~~~~

**ASIODNS_FD_ADD_TCP**

adding a new TCP server by opened fd %1

  A debug message informing about installing a file descriptor as a server.
  The file descriptor number is noted.

**ASIODNS_FD_ADD_UDP**

adding a new UDP server by opened fd %1

  A debug message informing about installing a file descriptor as a server.
  The file descriptor number is noted.

**ASIODNS_FETCH_COMPLETED**

upstream fetch to %1(%2) has now completed

  A debug message, this records that the upstream fetch (a query made by the
  resolver on behalf of its client) to the specified address has completed.

**ASIODNS_FETCH_STOPPED**

upstream fetch to %1(%2) has been stopped

  An external component has requested the halting of an upstream fetch.  This
  is an allowed operation, and the message should only appear if debug is
  enabled.

**ASIODNS_OPEN_SOCKET**

error %1 opening %2 socket to %3(%4)

  The asynchronous I/O code encountered an error when trying to open a socket
  of the specified protocol in order to send a message to the target address.
  The number of the system error that caused the problem is given in the
  message.

**ASIODNS_READ_DATA**

error %1 reading %2 data from %3(%4)

  The asynchronous I/O code encountered an error when trying to read data from
  the specified address on the given protocol.  The number of the system
  error that caused the problem is given in the message.

**ASIODNS_READ_TIMEOUT**

receive timeout while waiting for data from %1(%2)

  An upstream fetch from the specified address timed out.  This may happen for
  any number of reasons and is most probably a problem at the remote server
  or a problem on the network.  The message will only appear if debug is
  enabled.

**ASIODNS_SEND_DATA**

error %1 sending data using %2 to %3(%4)

  The asynchronous I/O code encountered an error when trying to send data to
  the specified address on the given protocol.  The number of the system
  error that caused the problem is given in the message.

**ASIODNS_SYNC_UDP_CLOSE_FAIL**

failed to close a DNS/UDP socket: %1

  This is the same to ASIODNS_UDP_CLOSE_FAIL but happens on the
  "synchronous UDP server", mainly used for the authoritative DNS server
  daemon.

**ASIODNS_TCP_ACCEPT_FAIL**

failed to accept TCP DNS connection: %1

  Accepting a TCP connection from a DNS client failed due to an error
  that could happen but should be rare.  The reason for the error is
  included in the log message.  The server still keeps accepting new
  connections, so unless it happens often it's probably okay to ignore
  this error.  If the shown error indicates something like "too many
  open files", it's probably because the run time environment is too
  restrictive on this limitation, so consider adjusting the limit using
  a tool such as ulimit.  If you see other types of errors too often,
  there may be something overlooked; please file a bug report in that case.

**ASIODNS_TCP_CLEANUP_CLOSE_FAIL**

failed to close a DNS/TCP socket on port cleanup: %1

  A TCP DNS server tried to close a TCP socket (one created on accepting
  a new connection or is already unused) as a step of cleaning up the
  corresponding listening port, but it failed to do that.  This is
  generally an unexpected event and so is logged as an error.
  See also the description of ASIODNS_TCP_CLOSE_ACCEPTOR_FAIL.

**ASIODNS_TCP_CLOSE_ACCEPTOR_FAIL**

failed to close listening TCP socket: %1

  A TCP DNS server tried to close a listening TCP socket (for accepting
  new connections) as a step of cleaning up the corresponding listening
  port (e.g., on server shutdown or updating port configuration), but it
  failed to do that.  This is generally an unexpected event and so is
  logged as an error.  See ASIODNS_TCP_CLOSE_FAIL on the implication of
  related system resources.

**ASIODNS_TCP_CLOSE_FAIL**

failed to close DNS/TCP socket with a client: %1

  A TCP DNS server tried to close a TCP socket used to communicate with
  a client, but it failed to do that.  While closing a socket should
  normally be an error-free operation, there have been known cases where
  this happened with a "connection reset by peer" error.  This might be
  because of some odd client behavior, such as sending a TCP RST after
  establishing the connection and before the server closes the socket,
  but how exactly this could happen seems to be system dependent (i.e,
  it's not part of the standard socket API), so it's difficult to
  provide a general explanation.  In any case, it is believed that an
  error on closing a socket doesn't mean leaking system resources (the
  kernel should clean up any internal resource related to the socket,
  just reporting an error detected in the close call), but, again, it
  seems to be system dependent.  This message is logged at a debug level
  as it's known to happen and could be triggered by a remote node and it
  would be better to not be too verbose, but you might want to increase
  the log level and make sure there's no resource leak or other system
  level troubles when it's logged.

**ASIODNS_TCP_CLOSE_NORESP_FAIL**

failed to close DNS/TCP socket with a client: %1

  A TCP DNS server tried to close a TCP socket used to communicate with
  a client without returning an answer (which normally happens for zone
  transfer requests), but it failed to do that.  See ASIODNS_TCP_CLOSE_FAIL
  for more details.

**ASIODNS_TCP_GETREMOTE_FAIL**

failed to get remote address of a DNS TCP connection: %1

  A TCP DNS server tried to get the address and port of a remote client
  on a connected socket but failed.  It's expected to be rare but can
  still happen.  See also ASIODNS_TCP_READLEN_FAIL.

**ASIODNS_TCP_READDATA_FAIL**

failed to get DNS data on a TCP socket: %1

  A TCP DNS server tried to read a DNS message (that follows a 2-byte
  length field) but failed.  It's expected to be rare but can still happen.
  See also ASIODNS_TCP_READLEN_FAIL.

**ASIODNS_TCP_READLEN_FAIL**

failed to get DNS data length on a TCP socket: %1

  A TCP DNS server tried to get the length field of a DNS message (the first
  2 bytes of a new chunk of data) but failed.  This is generally expected to
  be rare but can still happen, e.g, due to an unexpected reset of the
  connection.  A specific reason for the failure is included in the log
  message.

**ASIODNS_TCP_WRITE_FAIL**

failed to send DNS message over a TCP socket: %1

  A TCP DNS server tried to send a DNS message to a remote client but
  failed.  It's expected to be rare but can still happen.  See also
  ASIODNS_TCP_READLEN_FAIL.

**ASIODNS_UDP_ASYNC_SEND_FAIL**

Error sending UDP packet to %1: %2

  The low-level ASIO library reported an error when trying to send a UDP
  packet in asynchronous UDP mode. This can be any error reported by
  send_to(), and can indicate problems such as too high a load on the network,
  or a problem in the underlying library or system.
  This packet is dropped and will not be sent, but service should resume
  normally.
  If you see a single occurrence of this message, it probably does not
  indicate any significant problem, but if it is logged often, it is probably
  a good idea to inspect your network traffic.

**ASIODNS_UDP_CLOSE_FAIL**

failed to close a DNS/UDP socket: %1

  A UDP DNS server tried to close its UDP socket, but failed to do that.
  This is generally an unexpected event and so is logged as an error.

**ASIODNS_UDP_RECEIVE_FAIL**

failed to receive UDP DNS packet: %1

  Receiving a UDP packet from a DNS client failed due to an error that
  could happen but should be very rare.  The server still keeps
  receiving UDP packets on this socket.  The reason for the error is
  included in the log message.  This log message is basically not
  expected to appear at all in practice; if it does, there may be some
  system level failure and other system logs may have to be checked.

**ASIODNS_UDP_SYNC_RECEIVE_FAIL**

failed to receive UDP DNS packet: %1

  This is the same to ASIODNS_UDP_RECEIVE_FAIL but happens on the
  "synchronous UDP server", mainly used for the authoritative DNS server
  daemon.

**ASIODNS_UDP_SYNC_SEND_FAIL**

Error sending UDP packet to %1: %2

  The low-level ASIO library reported an error when trying to send a UDP
  packet in synchronous UDP mode. See ASIODNS_UDP_ASYNC_SEND_FAIL for
  more information.

**ASIODNS_UNKNOWN_ORIGIN**

unknown origin for ASIO error code %1 (protocol: %2, address %3)

  An internal consistency check on the origin of a message from the
  asynchronous I/O module failed. This may indicate an internal error;
  please submit a bug report.

BOOTP
~~~~~

**BOOTP_BOOTP_QUERY**

recognized a BOOTP query: %1

  This debug message is printed when the BOOTP query was recognized. The
  BOOTP client class was added and the message type set to DHCPREQUEST.
  The query client and transaction identification are displayed.

**BOOTP_LOAD**

Bootp hooks library has been loaded

  This info message indicates that the Bootp hooks library has been loaded.

**BOOTP_PACKET_OPTIONS_SKIPPED**

an error unpacking an option, caused subsequent options to be skipped: %1

  A debug message issued when an option failed to unpack correctly, making it
  impossible to unpack the remaining options in the DHCPv4 query. The server
  will still attempt to service the packet. The sole argument provides a
  reason for unpacking error.

**BOOTP_PACKET_PACK**

%1: preparing on-wire format of the packet to be sent

  This debug message is issued when the server starts preparing the on-wire
  format of the packet to be sent back to the client. The argument specifies
  the client and the transaction identification information.

**BOOTP_PACKET_PACK_FAIL**

%1: preparing on-wire-format of the packet to be sent failed %2

  This error message is issued when preparing an on-wire format of the
  packet has failed. The first argument identifies the client and the
  BOOTP transaction.  The second argument includes the error string.

**BOOTP_PACKET_UNPACK_FAILED**

failed to parse query from %1 to %2, received over interface %3, reason: %4

  This debug message is issued when received DHCPv4 query is malformed and
  can't be parsed by the buffer4_receive callout. The query will be
  dropped by the server. The first three arguments specify source IP address,
  destination IP address and the interface. The last argument provides a
  reason for failure.

COMMAND
~~~~~~~

**COMMAND_ACCEPTOR_START**

Starting to accept connections via unix domain socket bound to %1

  This informational message is issued when the Kea server starts an acceptor
  via which it is going to accept new control connections. The acceptor is
  bound to the endpoint associated with the filename provided as an argument.
  If starting the acceptor fails, subsequent error messages will provide a
  reason for failure.

**COMMAND_DEREGISTERED**

Command %1 deregistered

  This debug message indicates that the daemon stopped supporting specified
  command. This command can no longer be issued. If the command socket is
  open and this command is issued, the daemon will not be able to process it.

**COMMAND_EXTENDED_REGISTERED**

Command %1 registered

  This debug message indicates that the daemon started supporting specified
  command. The handler for the registered command includes a parameter holding
  entire command to be processed.

**COMMAND_HTTP_LISTENER_COMMAND_REJECTED**

Command HTTP listener rejected command '%1' from '%2'

  This debug messages is issued when a command is rejected. Arguments detail
  the command and the address the request was received from.

**COMMAND_HTTP_LISTENER_STARTED**

Command HTTP listener started with %1 threads, listening on %2:%3, use TLS: %4

  This debug messages is issued when an HTTP listener has been started to
  accept connections from Command API clients through which commands can be
  received and responses sent.  Arguments detail the number of threads
  that the listener is using, the address and port at which it is listening,
  and if HTTPS/TLS is used or not.

**COMMAND_HTTP_LISTENER_STOPPED**

Command HTTP listener for %1:%2 stopped.

  This debug messages is issued when the Command HTTP listener, listening
  at the given address and port, has completed shutdown.

**COMMAND_HTTP_LISTENER_STOPPING**

Stopping Command HTTP listener for %1:%2

  This debug messages is issued when the Command HTTP listener, listening
  at the given address and port, has begun to shutdown.

**COMMAND_PROCESS_ERROR1**

Error while processing command: %1

  This warning message indicates that the server encountered an error while
  processing received command. Additional information will be provided, if
  available. Additional log messages may provide more details.

**COMMAND_PROCESS_ERROR2**

Error while processing command: %1

  This warning message indicates that the server encountered an error while
  processing received command. The difference, compared to COMMAND_PROCESS_ERROR1
  is that the initial command was well formed and the error occurred during
  logic processing, not the command parsing. Additional information will be
  provided, if available. Additional log messages may provide more details.

**COMMAND_RECEIVED**

Received command '%1'

  This informational message indicates that a command was received over command
  socket. The nature of this command and its possible results will be logged
  with separate messages.

**COMMAND_REGISTERED**

Command %1 registered

  This debug message indicates that the daemon started supporting specified
  command. If the command socket is open, this command can now be issued.

**COMMAND_RESPONSE_ERROR**

Server failed to generate response for command: %1

  This error message indicates that the server failed to generate response for
  specified command. This likely indicates a server logic error, as the server
  is expected to generate valid responses for all commands, even malformed
  ones.

**COMMAND_SOCKET_ACCEPT_FAIL**

Failed to accept incoming connection on command socket %1: %2

  This error indicates that the server detected incoming connection and executed
  accept system call on said socket, but this call returned an error. Additional
  information may be provided by the system as second parameter.

**COMMAND_SOCKET_CLOSED_BY_FOREIGN_HOST**

Closed command socket %1 by foreign host, %2

  This is an information message indicating that the command connection has been
  closed by a command control client, and whether or not any partially read data
  was discarded.

**COMMAND_SOCKET_CONNECTION_CANCEL_FAIL**

Failed to cancel read operation on socket %1: %2

  This error message is issued to indicate an error to cancel asynchronous read
  of the control command over the control socket. The cancel operation is performed
  when the timeout occurs during communication with a client. The error message
  includes details about the reason for failure.

**COMMAND_SOCKET_CONNECTION_CLOSED**

Closed socket %1 for existing command connection

  This is a debug message indicating that the socket created for handling
  client's connection is closed. This usually means that the client disconnected,
  but may also mean a timeout.

**COMMAND_SOCKET_CONNECTION_CLOSE_FAIL**

Failed to close command connection: %1

  This error message is issued when an error occurred when closing a
  command connection and/or removing it from the connections pool. The
  detailed error is provided as an argument.

**COMMAND_SOCKET_CONNECTION_OPENED**

Opened socket %1 for incoming command connection

  This is a debug message indicating that a new incoming command connection was
  detected and a dedicated socket was opened for that connection.

**COMMAND_SOCKET_CONNECTION_SHUTDOWN_FAIL**

Encountered error %1 while trying to gracefully shutdown socket

  This message indicates an error while trying to gracefully shutdown command
  connection. The type of the error is included in the message.

**COMMAND_SOCKET_CONNECTION_TIMEOUT**

Timeout occurred for connection over socket %1

  This is an informational message that indicates that the timeout has
  occurred for one of the command channel connections. The response
  sent by the server indicates a timeout and is then closed.

**COMMAND_SOCKET_READ**

Received %1 bytes over command socket %2

  This debug message indicates that specified number of bytes was received
  over command socket identified by specified file descriptor.

**COMMAND_SOCKET_READ_FAIL**

Encountered error %1 while reading from command socket %2

  This error message indicates that an error was encountered while
  reading from command socket.

**COMMAND_SOCKET_WRITE**

Sent response of %1 bytes (%2 bytes left to send) over command socket %3

  This debug message indicates that the specified number of bytes was sent
  over command socket identifier by the specified file descriptor.

**COMMAND_SOCKET_WRITE_FAIL**

Error while writing to command socket %1 : %2

  This error message indicates that an error was encountered while
  attempting to send a response to the command socket.

**COMMAND_WATCH_SOCKET_CLEAR_ERROR**

watch socket failed to clear: %1

  This error message is issued when the command manager was unable to reset
  the ready status after completing a send. This is a programmatic error
  that should be reported. The command manager may or may not continue
  to operate correctly.

**COMMAND_WATCH_SOCKET_CLOSE_ERROR**

watch socket failed to close: %1

  This error message is issued when command manager attempted to close the
  socket used for indicating the ready status for send operations. This
  should not have any negative impact on the operation of the command
  manager as it happens when the connection is being terminated.

CTRL
~~~~

**CTRL_AGENT_COMMAND_FORWARDED**

command %1 successfully forwarded to the service %2 from remote address %3

  This informational message is issued when the CA successfully forwards
  the control message to the specified Kea service and receives a response.

**CTRL_AGENT_COMMAND_FORWARD_BEGIN**

begin forwarding command %1 to service %2

  This debug message is issued when the Control Agent starts forwarding a
  received command to one of the Kea servers.

**CTRL_AGENT_COMMAND_FORWARD_FAILED**

failed forwarding command %1: %2

  This debug message is issued when the Control Agent failed forwarding a
  received command to one of the Kea servers. The second argument provides
  the details of the error.

**CTRL_AGENT_COMMAND_RECEIVED**

command %1 received from remote address %2

  This informational message is issued when the CA receives a control message,
  whether it is destined to the control agent itself, or to be forwarded on.

**CTRL_AGENT_CONFIG_CHECK_FAIL**

Control Agent configuration check failed: %1

  This error message indicates that the CA had failed configuration
  check. Details are provided. Additional details may be available
  in earlier log entries, possibly on lower levels.

**CTRL_AGENT_CONFIG_FAIL**

Control Agent configuration failed: %1

  This error message indicates that the CA had failed configuration
  attempt. Details are provided. Additional details may be available
  in earlier log entries, possibly on lower levels.

**CTRL_AGENT_CONFIG_SYNTAX_WARNING**

Control Agent configuration syntax warning: %1

  This warning message indicates that the CA configuration had a minor syntax
  error. The error was displayed and the configuration parsing resumed.

**CTRL_AGENT_FAILED**

application experienced a fatal error: %1

  This is a fatal error message issued when the Control Agent application
  encounters an unrecoverable error from within the event loop.

**CTRL_AGENT_HTTPS_SERVICE_STARTED**

HTTPS service bound to address %1:%2

  This informational message indicates that the server has started HTTPS service
  on the specified address and port. All control commands should be sent to this
  address and port over a TLS channel.

**CTRL_AGENT_HTTP_SERVICE_STARTED**

HTTP service bound to address %1:%2

  This informational message indicates that the server has started HTTP service
  on the specified address and port. All control commands should be sent to this
  address and port.

**CTRL_AGENT_RUN_EXIT**

application is exiting the event loop

  This is a debug message issued when the Control Agent exits its
  event loop.

DATABASE
~~~~~~~~

**DATABASE_INVALID_ACCESS**

invalid database access string: %1

  This is logged when an attempt has been made to parse a database access string
  and the attempt ended in error.  The access string in question - which
  should be of the form 'keyword=value keyword=value...' is included in
  the message.

**DATABASE_MYSQL_COMMIT**

committing to MySQL database

  The code has issued a commit call.  All outstanding transactions will be
  committed to the database.  Note that depending on the MySQL settings,
  the committal may not include a write to disk.

**DATABASE_MYSQL_FATAL_ERROR**

Unrecoverable MySQL error occurred: %1 for <%2>, reason: %3 (error code: %4).

  An error message indicating that communication with the MySQL database server
  has been lost.  If automatic recovery has been enabled,  then the server will
  attempt to recover connectivity.  If not, then the server will exit with a
  non-zero exit code.  The cause of such an error is most likely a network issue
  or the MySQL server has gone down.

**DATABASE_MYSQL_ROLLBACK**

rolling back MySQL database

  The code has issued a rollback call.  All outstanding transaction will
  be rolled back and not committed to the database.

**DATABASE_MYSQL_START_TRANSACTION**

starting new MySQL transaction

  A debug message issued when a new MySQL transaction is being started.
  This message is typically not issued when inserting data into a
  single table because the server doesn't explicitly start
  transactions in this case. This message is issued when data is
  inserted into multiple tables with multiple INSERT statements
  and there may be a need to rollback the whole transaction if
  any of these INSERT statements fail.

**DATABASE_PGSQL_COMMIT**

committing to PostgreSQL database

  The code has issued a commit call.  All outstanding transactions will be
  committed to the database.  Note that depending on the PostgreSQL settings,
  the committal may not include a write to disk.

**DATABASE_PGSQL_CREATE_SAVEPOINT**

creating a new PostgreSQL savepoint: %1

  The code is issuing a call to create a savepoint within the current
  transaction.  Database modifications made up to this point will be preserved
  should a subsequent call to rollback to this savepoint occurs prior to the
  transaction being committed.

**DATABASE_PGSQL_DEALLOC_ERROR**

An error occurred deallocating SQL statements while closing the PostgreSQL lease database: %1

  This is an error message issued when a DHCP server (either V4 or V6) experienced
  and error freeing database SQL resources as part of closing its connection to
  the PostgreSQL database.  The connection is closed as part of normal server
  shutdown.  This error is most likely a programmatic issue that is highly
  unlikely to occur or negatively impact server operation.

**DATABASE_PGSQL_FATAL_ERROR**

Unrecoverable PostgreSQL error occurred: Statement: <%1>, reason: %2 (error code: %3).

  An error message indicating that communication with the PostgreSQL database server
  has been lost.  If automatic recovery has been enabled,  then the server will
  attempt to recover the connectivity.  If not, then the server will exit with a
  non-zero exit code.  The cause of such an error is most likely a network issue
  or the PostgreSQL server has gone down.

**DATABASE_PGSQL_ROLLBACK**

rolling back PostgreSQL database

  The code has issued a rollback call.  All outstanding transaction will
  be rolled back and not committed to the database.

**DATABASE_PGSQL_ROLLBACK_SAVEPOINT**

rolling back PostgreSQL database to savepoint: $1

  The code is issuing a call to rollback to the given savepoint.  Any database
  modifications that were made after the savepoint was created will be rolled back
  and not committed to the database.

**DATABASE_PGSQL_START_TRANSACTION**

starting a new PostgreSQL transaction

  A debug message issued when a new PostgreSQL transaction is being started.
  This message is typically not issued when inserting data into a
  single table because the server doesn't explicitly start
  transactions in this case. This message is issued when data is
  inserted into multiple tables with multiple INSERT statements
  and there may be a need to rollback the whole transaction if
  any of these INSERT statements fail.

DCTL
~~~~

**DCTL_ALREADY_RUNNING**

%1 already running? %2

  This is an error message that occurs when a module encounters a pre-existing
  PID file which contains the PID of a running process.  This most likely
  indicates an attempt to start a second instance of a module using the
  same configuration file.  It is possible, though unlikely, that the PID file
  is a remnant left behind by a server crash or power failure and the PID
  it contains refers to a process other than Kea process.  In such an event,
  it would be necessary to manually remove the PID file.  The first argument is
  the process name, the second contains the PID and PID file.

**DCTL_CCSESSION_ENDING**

%1 ending control channel session

  This debug message is issued just before the controller attempts
  to disconnect from its session with the Kea control channel.

**DCTL_CFG_FILE_RELOAD_ERROR**

configuration reload failed: %1, reverting to current configuration.

  This is an error message indicating that the application attempted to reload
  its configuration from file and encountered an error.  This is likely due to
  invalid content in the configuration file.  The application should continue
  to operate under its current configuration.

**DCTL_CFG_FILE_RELOAD_SIGNAL_RECVD**

OS signal %1 received, reloading configuration from file: %2

  This is an informational message indicating the application has received a signal
  instructing it to reload its configuration from file.

**DCTL_COMMAND_RECEIVED**

%1 received command: %2, arguments: %3

  A debug message listing the command (and possible arguments) received
  from the Kea control system by the controller.

**DCTL_CONFIG_CHECK_COMPLETE**

server has completed configuration check: %1, result: %2

  This is an informational message announcing the successful processing of a
  new configuration check is complete. The result of that check is printed.
  This informational message is printed when configuration check is requested.

**DCTL_CONFIG_COMPLETE**

server has completed configuration: %1

  This is an informational message announcing the successful processing of a
  new configuration. It is output during server startup, and when an updated
  configuration is committed by the administrator.  Additional information
  may be provided.

**DCTL_CONFIG_DEPRECATED**

server configuration includes a deprecated object: %1

  This error message is issued when the configuration includes a deprecated
  object (i.e. a top level element) which will be ignored.

**DCTL_CONFIG_FETCH**

Fetching configuration data from config backends.

  This is an informational message emitted when the Kea server is about to begin
  retrieving configuration data from one or more configuration backends.

**DCTL_CONFIG_FILE_LOAD_FAIL**

%1 reason: %2

  This fatal error message indicates that the application attempted to load its
  initial configuration from file and has failed. The service will exit.

**DCTL_CONFIG_LOAD_FAIL**

%1 configuration failed to load: %2

  This critical error message indicates that the initial application
  configuration has failed. The service will start, but will not
  process requests until the configuration has been corrected.

**DCTL_CONFIG_START**

parsing new configuration: %1

  A debug message indicating that the application process has received an
  updated configuration and has passed it to its configuration manager
  for parsing.

**DCTL_CONFIG_STUB**

%1 configuration stub handler called

  This debug message is issued when the dummy handler for configuration
  events is called.  This only happens during initial startup.

**DCTL_CONFIG_UPDATE**

%1 updated configuration received: %2

  A debug message indicating that the controller has received an
  updated configuration from the Kea configuration system.

**DCTL_DEVELOPMENT_VERSION**

This software is a development branch of Kea. It is not recommended for production use.

  This warning message is displayed when the version is a development
  (vs stable) one: the second number of the version is odd.

**DCTL_INIT_PROCESS**

%1 initializing the application

  This debug message is issued just before the controller attempts
  to create and initialize its application instance.

**DCTL_INIT_PROCESS_FAIL**

%1 application initialization failed: %2

  This error message is issued if the controller could not initialize the
  application and will exit.

**DCTL_NOT_RUNNING**

%1 application instance is not running

  A warning message is issued when an attempt is made to shut down the
  application when it is not running.

**DCTL_OPEN_CONFIG_DB**

Opening configuration database: %1

  This message is printed when the Kea server is attempting to open a
  configuration database.  The database access string with password redacted
  is logged.

**DCTL_PARSER_FAIL**

: %1

  On receipt of a new configuration, the server failed to create a parser to
  decode the contents of the named configuration element, or the creation
  succeeded but the parsing actions and committal of changes failed.
  The reason for the failure is given in the message.

**DCTL_PID_FILE_ERROR**

%1 could not create a PID file: %2

  This is an error message that occurs when the server is unable to create
  its PID file.  The log message should contain details sufficient to
  determine the underlying cause.  The most likely culprits are that
  some portion of the pathname does not exist or a permissions issue. The
  default path is determined by --localstatedir or --runstatedir configure
  parameters but may be overridden by setting environment variable,
  KEA_PIDFILE_DIR.  The first argument is the process name.

**DCTL_PROCESS_FAILED**

%1 application execution failed: %2

  The controller has encountered a fatal error while running the
  application and is terminating. The reason for the failure is
  included in the message.

**DCTL_RUN_PROCESS**

%1 starting application event loop

  This debug message is issued just before the controller invokes
  the application run method.

**DCTL_SESSION_FAIL**

%1 controller failed to establish Kea session: %1

  The controller has failed to establish communication with the rest of
  Kea and will exit.

**DCTL_SHUTDOWN**

%1 has shut down, pid: %2, version: %3

  This is an informational message indicating that the service has shut
  down. The argument specifies a name of the service.

**DCTL_SHUTDOWN_SIGNAL_RECVD**

OS signal %1 received, starting shutdown

  This is a debug message indicating the application has received a signal
  instructing it to shutdown.

**DCTL_STANDALONE**

%1 skipping message queue, running standalone

  This is a debug message indicating that the controller is running in the
  application in standalone mode. This means it will not connected to the Kea
  message queue. Standalone mode is only useful during program development,
  and should not be used in a production environment.

**DCTL_STARTING**

%1 starting, pid: %2, version: %3 (%4)

  This is an informational message issued when controller for the
  service first starts. Version is also reported.

**DCTL_UNLOAD_LIBRARIES_ERROR**

error unloading hooks libraries during shutdown: %1

  This error message indicates that during shutdown, unloading hooks
  libraries failed to close them. If the list of libraries is empty it is
  a programmatic error in the server code. If it is not empty it could be
  a programmatic error in one of the hooks libraries which could lead to
  a crash during finalization.

DHCP4
~~~~~

**DHCP4_ACTIVATE_INTERFACE**

activating interface %1

  This message is printed when DHCPv4 server enabled an interface to be used
  to receive DHCPv4 traffic. IPv4 socket on this interface will be opened once
  Interface Manager starts up procedure of opening sockets.

**DHCP4_ALREADY_RUNNING**

%1 already running? %2

  This is an error message that occurs when the DHCPv4 server encounters
  a pre-existing PID file which contains the PID of a running process.
  This most likely indicates an attempt to start a second instance of
  the server using the same configuration file.  It is possible, though
  unlikely that the PID file is a remnant left behind by a server crash or
  power failure and the PID it contains refers to a process other than
  the server.  In such an event, it would be necessary to manually remove
  the PID file.  The first argument is the DHCPv4 process name, the
  second contains the PID and PID file.

**DHCP4_BUFFER_RECEIVED**

received buffer from %1:%2 to %3:%4 over interface %5

  This debug message is logged when the server has received a packet
  over the socket. When the message is logged the contents of the received
  packet hasn't been parsed yet. The only available information is the
  interface and the source and destination IPv4 addresses/ports.

**DHCP4_BUFFER_RECEIVE_FAIL**

error on attempt to receive packet: %1

  The DHCPv4 server tried to receive a packet but an error
  occurred during this attempt. The reason for the error is included in
  the message.

**DHCP4_BUFFER_UNPACK**

parsing buffer received from %1 to %2 over interface %3

  This debug message is issued when the server starts parsing the received
  buffer holding the DHCPv4 message. The arguments specify the source and
  destination IPv4 addresses as well as the interface over which the buffer has
  been received.

**DHCP4_BUFFER_WAIT_SIGNAL**

signal received while waiting for next packet

  This debug message is issued when the server was waiting for the
  packet, but the wait has been interrupted by the signal received
  by the process. The signal will be handled before the server starts
  waiting for next packets.

**DHCP4_CB_ON_DEMAND_FETCH_UPDATES_FAIL**

error on demand attempt to fetch configuration updates from the configuration backend(s): %1

  This error message is issued when the server attempted to fetch
  configuration updates from the database and this on demand attempt failed.
  The sole argument which is returned to the config-backend-pull command
  caller too contains the reason for failure.

**DHCP4_CB_PERIODIC_FETCH_UPDATES_FAIL**

error on periodic attempt to fetch configuration updates from the configuration backend(s): %1

  This error message is issued when the server attempted to fetch
  configuration updates from the database and this periodic attempt failed.
  The server will re-try according to the configured value of the
  config-fetch-wait-time parameter. The sole argument contains the
  reason for failure.

**DHCP4_CB_PERIODIC_FETCH_UPDATES_RETRIES_EXHAUSTED**

maximum number of configuration fetch attempts: 10, has been exhausted without success

  This error indicates that the server has made a number of unsuccessful
  periodic attempts to fetch configuration updates from a configuration backend.
  The server will continue to operate but won't make any further attempts
  to fetch configuration updates. The administrator must fix the configuration
  in the database and reload (or restart) the server.

**DHCP4_CLASS_ASSIGNED**

%1: client packet has been assigned to the following class(es): %2

  This debug message informs that incoming packet has been assigned to specified
  class or classes. This is a normal behavior and indicates successful operation.
  The first argument specifies the client and transaction identification
  information. The second argument includes all classes to which the
  packet has been assigned.

**DHCP4_CLASS_UNCONFIGURED**

%1: client packet belongs to an unconfigured class: %2

  This debug message informs that incoming packet belongs to a class
  which cannot be found in the configuration. Either a hook written
  before the classification was added to Kea is used, or class naming is
  inconsistent.

**DHCP4_CLASS_UNDEFINED**

required class %1 has no definition

  This debug message informs that a class is listed for required evaluation but
  has no definition.

**DHCP4_CLASS_UNTESTABLE**

required class %1 has no test expression

  This debug message informs that a class was listed for required evaluation but
  its definition does not include a test expression to evaluate.

**DHCP4_CLIENTID_IGNORED_FOR_LEASES**

%1: not using client identifier for lease allocation for subnet %2

  This debug message is issued when the server is processing the DHCPv4 message
  for which client identifier will not be used when allocating new lease or
  renewing existing lease. The server is explicitly configured to not use
  client identifier to lookup existing leases for the client and will not
  record client identifier in the lease database. This mode of operation
  is useful when clients don't use stable client identifiers, e.g. multi
  stage booting. The first argument includes the client and transaction
  identification information. The second argument specifies the identifier
  of the subnet where the client is connected and for which this mode of
  operation is configured on the server.

**DHCP4_CLIENT_FQDN_DATA**

%1: Client sent FQDN option: %2

  This debug message includes the detailed information extracted from the
  Client FQDN option sent in the query. The first argument includes the
  client and transaction identification information. The second argument
  specifies the detailed information about the FQDN option received
  by the server.

**DHCP4_CLIENT_FQDN_PROCESS**

%1: processing Client FQDN option

  This debug message is issued when the server starts processing the Client
  FQDN option sent in the client's query. The argument includes the
  client and transaction identification information.

**DHCP4_CLIENT_HOSTNAME_DATA**

%1: client sent Hostname option: %2

  This debug message includes the detailed information extracted from the
  Hostname option sent in the query. The first argument includes the
  client and transaction identification information. The second argument
  specifies the hostname carried in the Hostname option sent by the
  client.

**DHCP4_CLIENT_HOSTNAME_MALFORMED**

%1: client hostname option malformed: %2

  This debug message is issued when the DHCP server was unable to process the
  the hostname option sent by the client because the content is malformed.
  The first argument includes the client and transaction identification
  information. The second argument contains a description of the data error.

**DHCP4_CLIENT_HOSTNAME_PROCESS**

%1: processing client's Hostname option

  This debug message is issued when the server starts processing the Hostname
  option sent in the client's query. The argument includes the client and
  transaction identification information.

**DHCP4_CLIENT_NAME_PROC_FAIL**

%1: failed to process the fqdn or hostname sent by a client: %2

  This debug message is issued when the DHCP server was unable to process the
  FQDN or Hostname option sent by a client. This is likely because the client's
  name was malformed or due to internal server error. The first argument
  contains the client and transaction identification information. The
  second argument holds the detailed description of the error.

**DHCP4_COMMAND_RECEIVED**

received command %1, arguments: %2

  A debug message listing the command (and possible arguments) received
  from the Kea control system by the DHCPv4 server.

**DHCP4_CONFIG_COMPLETE**

DHCPv4 server has completed configuration: %1

  This is an informational message announcing the successful processing of a
  new configuration. It is output during server startup, and when an updated
  configuration is committed by the administrator.  Additional information
  may be provided.

**DHCP4_CONFIG_FETCH**

Fetching configuration data from config backends.

  This is an informational message emitted when the DHCPv4 server about to begin
  retrieving configuration data from one or more configuration backends.

**DHCP4_CONFIG_LOAD_FAIL**

configuration error using file: %1, reason: %2

  This error message indicates that the DHCPv4 configuration has failed.
  If this is an initial configuration (during server's startup) the server
  will fail to start. If this is a dynamic reconfiguration attempt the
  server will continue to use an old configuration.

**DHCP4_CONFIG_NEW_SUBNET**

a new subnet has been added to configuration: %1

  This is an informational message reporting that the configuration has
  been extended to include the specified IPv4 subnet.

**DHCP4_CONFIG_OPTION_DUPLICATE**

multiple options with the code %1 added to the subnet %2

  This warning message is issued on an attempt to configure multiple options
  with the same option code for a particular subnet. Adding multiple options
  is uncommon for DHCPv4, but is not prohibited.

**DHCP4_CONFIG_PACKET_QUEUE**

DHCPv4 packet queue info after configuration: %1

  This informational message is emitted during DHCPv4 server configuration,
  immediately after configuring the DHCPv4 packet queue.  The information
  shown depends upon the packet queue type selected.

**DHCP4_CONFIG_RECEIVED**

received configuration %1

  A debug message listing the configuration received by the DHCPv4 server.
  The source of that configuration depends on used configuration backend.

**DHCP4_CONFIG_START**

DHCPv4 server is processing the following configuration: %1

  This is a debug message that is issued every time the server receives a
  configuration. That happens at start up and also when a server configuration
  change is committed by the administrator.

**DHCP4_CONFIG_SYNTAX_WARNING**

configuration syntax warning: %1

  This warning message indicates that the DHCPv4 configuration had a minor
  syntax error. The error was displayed and the configuration parsing resumed.

**DHCP4_CONFIG_UNRECOVERABLE_ERROR**

DHCPv4 server new configuration failed with an error which cannot be recovered

  This fatal error message is issued when a new configuration raised an error
  which cannot be recovered. A correct configuration must be applied as soon
  as possible as the server is no longer working.
  The configuration can be fixed in several ways. If the control channel
  is open, config-set with a valid configuration can be
  used. Alternatively, the original config file on disk could be fixed
  and SIGHUP signal could be sent (or the config-reload command
  issued). Finally, the server could be restarted completely.

**DHCP4_CONFIG_UNSUPPORTED_OBJECT**

DHCPv4 server configuration includes an unsupported object: %1

  This error message is issued when the configuration includes an unsupported
  object (i.e. a top level element).

**DHCP4_CONFIG_UPDATE**

updated configuration received: %1

  A debug message indicating that the DHCPv4 server has received an
  updated configuration from the Kea configuration system.

**DHCP4_DB_RECONNECT_DISABLED**

database reconnect is disabled: max-reconnect-tries %1, reconnect-wait-time %2

  This is an informational message indicating that connectivity to either the
  lease or host database or both and that automatic reconnect is not enabled.

**DHCP4_DB_RECONNECT_FAILED**

maximum number of database reconnect attempts: %1, has been exhausted without success

  This error indicates that the server failed to reconnect to the lease and/or
  host database(s) after making the maximum configured number of reconnect
  attempts. This might cause the server to shut down as specified in the
  configuration. Loss of connectivity is typically a network or database server
  issue.

**DHCP4_DB_RECONNECT_LOST_CONNECTION**

database connection lost.

  This info message indicates that the connection has been lost and the dhcp
  service might have been disabled, as specified in the configuration, in order to
  try to recover the connection.

**DHCP4_DB_RECONNECT_NO_DB_CTL**

unexpected error in database reconnect

  This is an error message indicating a programmatic error that should not
  occur. It prohibits the server from attempting to reconnect to its
  databases if connectivity is lost, and the server exits. This error
  should be reported.

**DHCP4_DB_RECONNECT_SUCCEEDED**

database connection recovered.

  This info message indicates that the connection has been recovered and the dhcp
  service has been restored.

**DHCP4_DDNS_REQUEST_SEND_FAILED**

failed sending a request to kea-dhcp-ddns, error: %1,  ncr: %2

  This error message indicates that DHCP4 server attempted to send a DDNS
  update request to the DHCP-DDNS server.  This is most likely a configuration or
  networking error.

**DHCP4_DEACTIVATE_INTERFACE**

deactivate interface %1

  This message is printed when DHCPv4 server disables an interface from being
  used to receive DHCPv4 traffic. Sockets on this interface will not be opened
  by the Interface Manager until interface is enabled.

**DHCP4_DECLINE_FAIL**

%1: error on decline lease for address %2: %3

  This error message indicates that the software failed to decline a
  lease from the lease database due to an error during a database
  operation. The first argument includes the client and the transaction
  identification information. The second argument holds the IPv4 address
  which decline was attempted. The last one contains the reason for
  failure.

**DHCP4_DECLINE_LEASE**

Received DHCPDECLINE for addr %1 from client %2. The lease will be unavailable for %3 seconds.

  This informational message is printed when a client received an address, but
  discovered that it is being used by some other device and notified the server by
  sending a DHCPDECLINE message. The server checked that this address really was
  leased to the client and marked this address as unusable for a certain
  amount of time. This message may indicate a misconfiguration in a network,
  as there is either a buggy client or more likely a device that is using an
  address that it is not supposed to. The server will fully recover from this
  situation, but if the underlying problem of a misconfigured or rogue device
  is not solved, this address may be declined again in the future.

**DHCP4_DECLINE_LEASE_MISMATCH**

Received DHCPDECLINE for addr %1 from client %2, but the data doesn't match: received hwaddr: %3, lease hwaddr: %4, received client-id: %5, lease client-id: %6

  This informational message means that a client attempted to report his address
  as declined (i.e. used by unknown entity). The server has information about
  a lease for that address, but the client's hardware address or client identifier
  does not match the server's stored information. The client's request will be ignored.

**DHCP4_DECLINE_LEASE_NOT_FOUND**

Received DHCPDECLINE for addr %1 from client %2, but no such lease found.

  This warning message indicates that a client reported that his address was
  detected as a duplicate (i.e. another device in the network is using this address).
  However, the server does not have a record for this address. This may indicate
  a client's error or a server's purged database.

**DHCP4_DEFERRED_OPTION_MISSING**

can find deferred option code %1 in the query

  This debug message is printed when a deferred option cannot be found in
  the query.

**DHCP4_DEFERRED_OPTION_UNPACK_FAIL**

An error unpacking the deferred option %1: %2

  A debug message issued when deferred unpacking of an option failed, making it
  to be left unpacked in the packet. The first argument is the option code,
  the second the error.

**DHCP4_DEVELOPMENT_VERSION**

This software is a development branch of Kea. It is not recommended for production use.

  This warning message is displayed when the version is a development
  (vs stable) one: the second number of the version is odd.

**DHCP4_DHCP4O6_BAD_PACKET**

received malformed DHCPv4o6 packet: %1

  A malformed DHCPv4o6 packet was received.

**DHCP4_DHCP4O6_PACKET_RECEIVED**

received DHCPv4o6 packet from DHCPv4 server (type %1) for %2 on interface %3

  This debug message is printed when the server is receiving a DHCPv4o6
  from the DHCPv4 server over inter-process communication.

**DHCP4_DHCP4O6_PACKET_SEND**

%1: trying to send packet %2 (type %3) to %4 port %5 on interface %6 encapsulating %7: %8 (type %9)

  The arguments specify the client identification information (HW address
  and client identifier), DHCPv6 message name and type, source IPv6
  address and port, and interface name, DHCPv4 client identification,
  message name and type.

**DHCP4_DHCP4O6_PACKET_SEND_FAIL**

%1: failed to send DHCPv4o6 packet: %2

  This error is output if the IPv4 DHCP server fails to send an
  DHCPv4o6 message to the IPv6 DHCP server. The reason for the
  error is included in the message.

**DHCP4_DHCP4O6_RECEIVE_FAIL**

failed to receive DHCPv4o6: %1

  This debug message indicates the inter-process communication with the
  DHCPv6 server failed. The reason for the error is included in
  the message.

**DHCP4_DHCP4O6_RECEIVING**

receiving DHCPv4o6 packet from DHCPv6 server

  This debug message is printed when the server is receiving a DHCPv4o6
  from the DHCPv6 server over inter-process communication socket.

**DHCP4_DHCP4O6_RESPONSE_DATA**

%1: responding with packet %2 (type %3), packet details: %4

  A debug message including the detailed data about the packet being
  sent to the DHCPv6 server to be forwarded to the client. The first
  argument contains the client and the transaction identification
  information. The second and third argument contains the packet name
  and type respectively. The fourth argument contains detailed packet
  information.

**DHCP4_DYNAMIC_RECONFIGURATION**

initiate server reconfiguration using file: %1, after receiving SIGHUP signal or config-reload command

  This is the info message logged when the DHCPv4 server starts reconfiguration
  as a result of receiving SIGHUP signal or config-reload command.

**DHCP4_DYNAMIC_RECONFIGURATION_FAIL**

dynamic server reconfiguration failed with file: %1

  This is a fatal error message logged when the dynamic reconfiguration of the
  DHCP server failed.

**DHCP4_DYNAMIC_RECONFIGURATION_SUCCESS**

dynamic server reconfiguration succeeded with file: %1

  This is info message logged when the dynamic reconfiguration of the DHCP server
  succeeded.

**DHCP4_EMPTY_HOSTNAME**

%1: received empty hostname from the client, skipping processing of this option

  This debug message is issued when the server received an empty Hostname option
  from a client. Server does not process empty Hostname options and therefore
  option is skipped. The argument holds the client and transaction identification
  information.

**DHCP4_FLEX_ID**

flexible identifier generated for incoming packet: %1

  This debug message is printed when host reservation type is set to flexible identifier
  and the expression specified in its configuration generated (was evaluated to)
  an identifier for incoming packet. This debug message is mainly intended as a
  debugging assistance for flexible identifier.

**DHCP4_GENERATE_FQDN**

%1: client did not send a FQDN or hostname; FQDN will be generated for the client

  This debug message is issued when the server did not receive a Hostname option
  from the client and hostname generation is enabled.  This provides a means to
  create DNS entries for unsophisticated clients.

**DHCP4_HANDLE_SIGNAL_EXCEPTION**

An exception was thrown while handing signal: %1

  This error message is printed when an ISC or standard exception was raised during signal
  processing. This likely indicates a coding error and should be reported to ISC.

**DHCP4_HOOKS_LIBS_RELOAD_FAIL**

reload of hooks libraries failed

  A "libreload" command was issued to reload the hooks libraries but for
  some reason the reload failed.  Other error messages issued from the
  hooks framework will indicate the nature of the problem.

**DHCP4_HOOK_BUFFER_RCVD_DROP**

received buffer from %1 to %2 over interface %3 was dropped because a callout set the drop flag

  This debug message is printed when a callout installed on buffer4_receive
  hook point set the drop flag. For this particular hook point, the
  setting of the flag by a callout instructs the server to drop the packet.
  The arguments specify the source and destination IPv4 address as well as
  the name of the interface over which the buffer has been received.

**DHCP4_HOOK_BUFFER_RCVD_SKIP**

received buffer from %1 to %2 over interface %3 is not parsed because a callout set the next step to SKIP.

  This debug message is printed when a callout installed on
  buffer4_receive hook point set the next step to SKIP. For this particular hook
  point, this value set by a callout instructs the server to
  not parse the buffer because it was already parsed by the hook. The
  arguments specify the source and destination IPv4 address as well as
  the name of the interface over which the buffer has been received.

**DHCP4_HOOK_BUFFER_SEND_SKIP**

%1: prepared response is dropped because a callout set the next step to SKIP.

  This debug message is printed when a callout installed on buffer4_send
  hook point set the next step to SKIP. For this particular hook point, the
  SKIP value set by a callout instructs the server to drop the packet.
  Server completed all the processing (e.g. may have assigned, updated
  or released leases), but the response will not be send to the client.

**DHCP4_HOOK_DDNS_UPDATE**

A hook has updated the DDNS parameters: hostname %1=>%2, forward update %3=>%4, reverse update %5=>%6

  This message indicates that there was a hook called on ddns4_update hook point
  and that hook updated the DDNS update parameters: hostname, or whether to
  conduct forward (A record) or reverse (PTR record) DDNS updates.

**DHCP4_HOOK_DECLINE_SKIP**

Decline4 hook callouts set status to DROP, ignoring packet.

  This message indicates that the server received DHCPDECLINE message, it was verified
  to be correct and matching server's lease information. The server called hooks
  for decline4 hook point and one of the callouts set next step status to DROP.
  The server will now abort processing of the packet as if it was never
  received. The lease will continue to be assigned to this client.

**DHCP4_HOOK_LEASE4_RELEASE_SKIP**

%1: lease was not released because a callout set the next step to SKIP

  This debug message is printed when a callout installed on lease4_release
  hook point set the next step status to SKIP. For this particular hook point, the
  value set by a callout instructs the server to not release a lease.

**DHCP4_HOOK_LEASES4_COMMITTED_DROP**

%1: packet is dropped, because a callout set the next step to DROP

  This debug message is printed when a callout installed on the leases4_committed
  hook point sets the next step to DROP.

**DHCP4_HOOK_LEASES4_COMMITTED_PARK**

%1: packet is parked, because a callout set the next step to PARK

  This debug message is printed when a callout installed on the leases4_committed
  hook point sets the next step to PARK.

**DHCP4_HOOK_LEASES4_PARKING_LOT_FULL**

The parked-packet-limit %1, has been reached, dropping query: %2

  This debug message occurs when the parking lot used to hold client queries
  while hook library work for them completes has reached or exceeded the
  limit set by the parked-packet-limit global parameter. This can occur when
  kea-dhcp4 is using hook libraries (e.g. HA) that implement the
  "leases4-committed" callout and client queries are arriving faster than
  those callouts can fulfill them.

**DHCP4_HOOK_PACKET_RCVD_SKIP**

%1: packet is dropped, because a callout set the next step to SKIP

  This debug message is printed when a callout installed on the pkt4_receive
  hook point sets the next step to SKIP. For this particular hook point, the
  value setting of the flag instructs the server to drop the packet.

**DHCP4_HOOK_PACKET_SEND_DROP**

%1: prepared DHCPv4 response was not sent because a callout set the next ste to DROP

  This debug message is printed when a callout installed on the pkt4_send
  hook point set the next step to DROP. For this particular hook point, the setting
  of the value by a callout instructs the server to drop the packet. This
  effectively means that the client will not get any response, even though
  the server processed client's request and acted on it (e.g. possibly
  allocated a lease). The argument specifies the client and transaction
  identification information.

**DHCP4_HOOK_PACKET_SEND_SKIP**

%1: prepared response is not sent, because a callout set the next stp to SKIP

  This debug message is printed when a callout installed on the pkt4_send
  hook point sets the next step to SKIP. For this particular hook point, this
  setting instructs the server to drop the packet. This means that
  the client will not get any response, even though the server processed
  client's request and acted on it (e.g. possibly allocated a lease).

**DHCP4_HOOK_SUBNET4_SELECT_DROP**

%1: packet was dropped, because a callout set the next step to 'drop'

  This debug message is printed when a callout installed on the
  subnet4_select hook point sets the next step to 'drop' value. For this particular hook
  point, the setting to that value instructs the server to drop the received
  packet. The argument specifies the client and transaction identification
  information.

**DHCP4_HOOK_SUBNET4_SELECT_SKIP**

%1: no subnet was selected, because a callout set the next skip flag

  This debug message is printed when a callout installed on the
  subnet4_select hook point sets the next step to SKIP value. For this particular hook
  point, the setting of the flag instructs the server not to choose a
  subnet, an action that severely limits further processing; the server
  will be only able to offer global options - no addresses will be assigned.
  The argument specifies the client and transaction identification
  information.

**DHCP4_INFORM_DIRECT_REPLY**

%1: DHCPACK in reply to the DHCPINFORM will be sent directly to %2 over %3

  This debug message is issued when the DHCPACK will be sent directly to the
  client, rather than via a relay. The first argument contains the client
  and transaction identification information. The second argument contains
  the client's IPv4 address to which the response will be sent. The third
  argument contains the local interface name.

**DHCP4_INIT_FAIL**

failed to initialize Kea server: %1

  The server has failed to initialize. This may be because the configuration
  was not successful, or it encountered any other critical error on startup.
  Attached error message provides more details about the issue.

**DHCP4_INIT_REBOOT**

%1: client is in INIT-REBOOT state and requests address %2

  This informational message is issued when the client is in the INIT-REBOOT
  state and is requesting an IPv4 address it is using to be allocated for it.
  The first argument includes the client and transaction identification
  information. The second argument specifies the requested IPv4 address.

**DHCP4_LEASE_ADVERT**

%1: lease %2 will be advertised

  This informational message indicates that the server has found the lease to be
  offered to the client. It is up to the client to choose one server out of
  those which offered leases and continue allocation with that server.
  The first argument specifies the client and the transaction identification
  information. The second argument specifies the IPv4 address to be offered.

**DHCP4_LEASE_ALLOC**

%1: lease %2 has been allocated for %3 seconds

  This informational message indicates that the server successfully granted a
  lease in response to client's DHCPREQUEST message. The lease information will
  be sent to the client in the DHCPACK message. The first argument contains the
  client and the transaction identification information. The second argument
  contains the allocated IPv4 address. The third argument is the validity
  lifetime.

**DHCP4_LEASE_REUSE**

%1: lease %2 has been reused for %3 seconds

  This informational message indicates that the server successfully reused a
  lease in response to client's message. The lease information will
  be sent to the client in the DHCPACK message. The first argument contains the
  client and the transaction identification information. The second argument
  contains the allocated IPv4 address. The third argument is the validity
  lifetime.

**DHCP4_MULTI_THREADING_INFO**

enabled: %1, number of threads: %2, queue size: %3

  This is a message listing some information about the multi-threading parameters
  with which the server is running.

**DHCP4_NCR_CREATION_FAILED**

%1: failed to generate name change requests for DNS: %2

  This message indicates that server was unable to generate NameChangeRequests
  which should be sent to the kea-dhcp_ddns module to create
  new DNS records for the lease being acquired or to update existing records
  for the renewed lease. The first argument contains the client and transaction
  identification information. The second argument includes the reason for the
  failure.

**DHCP4_NOT_RUNNING**

DHCPv4 server is not running

  A warning message is issued when an attempt is made to shut down the
  DHCPv4 server but it is not running.

**DHCP4_NO_LEASE_INIT_REBOOT**

%1: no lease for address %2 requested by INIT-REBOOT client

  This debug message is issued when the client being in the INIT-REBOOT state
  requested an IPv4 address but this client is unknown. The server will not
  respond. The first argument includes the client and the transaction id
  identification information. The second argument includes the IPv4 address
  requested by the client.

**DHCP4_NO_SOCKETS_OPEN**

no interface configured to listen to DHCP traffic

  This warning message is issued when current server configuration specifies
  no interfaces that server should listen on, or specified interfaces are not
  configured to receive the traffic.

**DHCP4_OPEN_CONFIG_DB**

Opening configuration database: %1

  This message is printed when the DHCPv4 server is attempting to open a
  configuration database.  The database access string with password redacted
  is logged.

**DHCP4_OPEN_SOCKET**

opening service sockets on port %1

  A debug message issued during startup, this indicates that the DHCPv4
  server is about to open sockets on the specified port.

**DHCP4_OPEN_SOCKETS_FAILED**

maximum number of open service sockets attempts: %1, has been exhausted without success

  This error indicates that the server failed to bind service sockets after making
  the maximum configured number of reconnect attempts. This might cause the server
  to shut down as specified in the configuration.

**DHCP4_OPEN_SOCKETS_NO_RECONNECT_CTL**

unexpected error in bind service sockets.

  This is an error message indicating a programmatic error that should not occur.
  It prohibits the server from attempting to bind to its service sockets if they
  are unavailable, and the server exits. This error should be reported.

**DHCP4_OPEN_SOCKET_FAIL**

failed to open socket: %1

  A warning message issued when IfaceMgr fails to open and bind a socket. The reason
  for the failure is appended as an argument of the log message.

**DHCP4_PACKET_DROP_0001**

failed to parse packet from %1 to %2, received over interface %3, reason: %4

  The DHCPv4 server has received a packet that it is unable to
  interpret. The reason why the packet is invalid is included in the message.

**DHCP4_PACKET_DROP_0002**

%1, from interface %2: no suitable subnet configured for a direct client

  This info message is logged when received a message from a directly connected
  client but there is no suitable subnet configured for the interface on
  which this message has been received. The IPv4 address assigned on this
  interface must belong to one of the configured subnets. Otherwise
  received message is dropped.

**DHCP4_PACKET_DROP_0003**

%1, from interface %2: it contains a foreign server identifier

  This debug message is issued when received DHCPv4 message is dropped because
  it is addressed to a different server, i.e. a server identifier held by
  this message doesn't match the identifier used by our server. The arguments
  of this message hold the name of the transaction id and interface on which
  the message has been received.

**DHCP4_PACKET_DROP_0004**

%1, from interface %2: missing msg-type option

  This is a debug message informing that incoming DHCPv4 packet did not
  have mandatory DHCP message type option and thus was dropped. The
  arguments specify the client and transaction identification information,
  as well as the interface on which the message has been received.

**DHCP4_PACKET_DROP_0005**

%1: unrecognized type %2 in option 53

  This debug message indicates that the message type carried in DHCPv4 option
  53 is unrecognized by the server. The valid message types are listed
  on the IANA website: http://www.iana.org/assignments/bootp-dhcp-parameters/bootp-dhcp-parameters.xhtml#message-type-53.
  The message will not be processed by the server. The arguments specify
  the client and transaction identification information, as well as the
  received message type.

**DHCP4_PACKET_DROP_0006**

%1: unsupported DHCPv4 message type %2

  This debug message indicates that the message type carried in DHCPv4 option
  53 is valid but the message will not be processed by the server. This includes
  messages being normally sent by the server to the client, such as DHCPOFFER,
  DHCPACK, DHCPNAK etc. The first argument specifies the client and transaction
  identification information. The second argument specifies the message type.

**DHCP4_PACKET_DROP_0007**

%1: failed to process packet: %2

  This is a general catch-all message indicating that the processing of a
  received packet failed.  The reason is given in the message.  The server
  will not send a response but will instead ignore the packet. The first
  argument contains the client and transaction identification information.
  The second argument includes the details of the error.

**DHCP4_PACKET_DROP_0008**

%1: DHCP service is globally disabled

  This debug message is issued when a packet is dropped because the DHCP service
  has been temporarily disabled. This affects all received DHCP packets. The
  service may be enabled by the "dhcp-enable" control command or automatically
  after a specified amount of time since receiving "dhcp-disable" command.

**DHCP4_PACKET_DROP_0009**

%1: Option 53 missing (no DHCP message type), is this a BOOTP packet?

  This debug message is issued when a packet is dropped because it did contain
  option 53 and thus has no DHCP message type. The most likely explanation is
  that it was BOOTP packet.

**DHCP4_PACKET_DROP_0010**

dropped as member of the special class 'DROP': %1

  This debug message is emitted when an incoming packet was classified
  into the special class 'DROP' and dropped. The packet details are displayed.

**DHCP4_PACKET_DROP_0011**

dropped as sent by the same client than a packet being processed by another thread: dropped %1 by thread %2 as duplicate of %3 processed by %4

  Currently multi-threading processing avoids races between packets sent by
  a client using the same client id option by dropping new packets until
  processing is finished.
  Packet details and thread identifiers are included for both packets in
  this warning message.

**DHCP4_PACKET_DROP_0012**

dropped as sent by the same client than a packet being processed by another thread: dropped %1 by thread %2 as duplicate of %3 processed by %4

  Currently multi-threading processing avoids races between packets sent by
  a client using the same hardware address by dropping new packets until
  processing is finished.
  Packet details and thread identifiers are included for both packets in
  this warning message.

**DHCP4_PACKET_DROP_0013**

dropped as member of the special class 'DROP' after host reservation lookup: %1

  This debug message is emitted when an incoming packet was classified
  after host reservation lookup into the special class 'DROP' and dropped.
  The packet details are displayed.

**DHCP4_PACKET_DROP_0014**

dropped as member of the special class 'DROP' after early global host reservations lookup: %1

  This debug message is emitted when an incoming packet was classified
  after early global host reservations lookup into the special class 'DROP'
  and dropped. The packet details are displayed.

**DHCP4_PACKET_NAK_0001**

%1: failed to select a subnet for incoming packet, src %2, type %3

  This error message is output when a packet was received from a subnet
  for which the DHCPv4 server has not been configured. The most probable
  cause is a misconfiguration of the server. The first argument contains
  the client and transaction identification information. The second argument
  contains the source IPv4 address of the packet. The third argument contains
  the name of the received packet.

**DHCP4_PACKET_NAK_0002**

%1: invalid address %2 requested by INIT-REBOOT

  This debug message is issued when the client being in the INIT-REBOOT state
  requested an IPv4 address which is not assigned to him. The server will respond
  to this client with DHCPNAK. The first argument contains the client and
  the transaction identification information. The second arguments holds the
  IPv4 address requested by the client.

**DHCP4_PACKET_NAK_0003**

%1: failed to advertise a lease, client sent ciaddr %2, requested-ip-address %3

  This message indicates that the server has failed to offer a lease to
  the specified client after receiving a DISCOVER message from it. There are
  many possible reasons for such a failure. The first argument contains
  the client and the transaction identification information. The second
  argument contains the IPv4 address in the ciaddr field. The third
  argument contains the IPv4 address in the requested-ip-address option
  (if present).

**DHCP4_PACKET_NAK_0004**

%1: failed to grant a lease, client sent ciaddr %2, requested-ip-address %3

  This message indicates that the server failed to grant a lease to the
  specified client after receiving a REQUEST message from it.  There are many
  possible reasons for such a failure. Additional messages will indicate the
  reason. The first argument contains the client and the transaction
  identification information. The second argument contains the IPv4 address
  in the ciaddr field. The third argument contains the IPv4 address in the
  requested-ip-address option (if present).

**DHCP4_PACKET_OPTIONS_SKIPPED**

An error unpacking an option, caused subsequent options to be skipped: %1

  A debug message issued when an option failed to unpack correctly, making it
  impossible to unpack the remaining options in the packet.  The server will
  server will still attempt to service the packet.

**DHCP4_PACKET_OPTION_UNPACK_FAIL**

An error unpacking the option %1: %2

  A debug message issued when an option failed to unpack correctly, making it
  to be left unpacked in the packet. The first argument is the option code,
  the second the error.

**DHCP4_PACKET_PACK**

%1: preparing on-wire format of the packet to be sent

  This debug message is issued when the server starts preparing the on-wire
  format of the packet to be sent back to the client. The argument specifies
  the client and the transaction identification information.

**DHCP4_PACKET_PACK_FAIL**

%1: preparing on-wire-format of the packet to be sent failed %2

  This error message is issued when preparing an on-wire format of the packet
  has failed. The first argument identifies the client and the DHCP transaction.
  The second argument includes the error string.

**DHCP4_PACKET_PROCESS_EXCEPTION**

exception occurred during packet processing

  This error message indicates that a non-standard exception was raised
  during packet processing that was not caught by other, more specific
  exception handlers. This packet will be dropped and the server will
  continue operation.

**DHCP4_PACKET_PROCESS_STD_EXCEPTION**

exception occurred during packet processing: %1

  This error message indicates that a standard exception was raised
  during packet processing that was not caught by other, more specific
  exception handlers. This packet will be dropped and the server will
  continue operation.

**DHCP4_PACKET_QUEUE_FULL**

multi-threading packet queue is full

  A debug message noting that the multi-threading packet queue is full so
  the oldest packet of the queue was dropped to make room for the received one.

**DHCP4_PACKET_RECEIVED**

%1: %2 (type %3) received from %4 to %5 on interface %6

  A debug message noting that the server has received the specified type of
  packet on the specified interface. The first argument specifies the
  client and transaction identification information. The second and third
  argument specify the name of the DHCPv4 message and its numeric type
  respectively. The remaining arguments specify the source IPv4 address,
  destination IPv4 address and the name of the interface on which the
  message has been received.

**DHCP4_PACKET_SEND**

%1: trying to send packet %2 (type %3) from %4:%5 to %6:%7 on interface %8

  The arguments specify the client identification information (HW address
  and client identifier), DHCP message name and type, source IPv4
  address and port, destination IPv4 address and port and the
  interface name.
  This debug message is issued when the server is trying to send the
  response to the client. When the server is using an UDP socket
  to send the packet there are cases when this operation may be
  unsuccessful and no error message will be displayed. One such situation
  occurs when the server is unicasting the response to the 'ciaddr' of
  a DHCPINFORM message. This often requires broadcasting an ARP
  message to obtain the link layer address of the unicast destination.
  If broadcast ARP messages are blocked in the network, according to
  the firewall policy, the ARP message will not cause a response.
  Consequently, the response to the DHCPINFORM will not be sent.
  Since the ARP communication is under the OS control, Kea is not
  notified about the drop of the packet which it is trying to send
  and it has no means to display an error message.

**DHCP4_PACKET_SEND_FAIL**

%1: failed to send DHCPv4 packet: %2

  This error is output if the DHCPv4 server fails to send an assembled
  DHCP message to a client. The first argument includes the client and
  the transaction identification information. The second argument includes
  the reason for failure.

**DHCP4_PARSER_COMMIT_EXCEPTION**

parser failed to commit changes

  On receipt of message containing details to a change of the DHCPv4
  server configuration, a set of parsers were successfully created, but one
  of them failed to commit its changes due to a low-level system exception
  being raised.  Additional messages may be output indicating the reason.

**DHCP4_PARSER_COMMIT_FAIL**

parser failed to commit changes: %1

  On receipt of message containing details to a change of the DHCPv4
  server configuration, a set of parsers were successfully created, but
  one of them failed to commit its changes.  The reason for the failure
  is given in the message.

**DHCP4_PARSER_EXCEPTION**

failed to create or run parser for configuration element %1

  On receipt of message containing details to a change of its configuration,
  the DHCPv4 server failed to create a parser to decode the contents of
  the named configuration element, or the creation succeeded but the parsing
  actions and committal of changes failed.  The message has been output in
  response to a non-Kea exception being raised.  Additional messages
  may give further information.

**DHCP4_PARSER_FAIL**

failed to create or run parser for configuration element %1: %2

  On receipt of message containing details to a change of its configuration,
  the DHCPv4 server failed to create a parser to decode the contents
  of the named configuration element, or the creation succeeded but the
  parsing actions and committal of changes failed.  The reason for the
  failure is given in the message.

**DHCP4_POST_ALLOCATION_NAME_UPDATE_FAIL**

%1: failed to update hostname %2 in a lease after address allocation: %3

  This message indicates the failure when trying to update the lease and/or
  options in the server's response with the hostname generated by the server
  or reserved for the client belonging to a shared network. The latter is
  the case when the server dynamically switches to another subnet (than
  initially selected for allocation) from the same shared network.

**DHCP4_QUERY_DATA**

%1, packet details: %2

  A debug message printing the details of the received packet. The first
  argument includes the client and the transaction identification
  information.

**DHCP4_RECLAIM_EXPIRED_LEASES_FAIL**

failed to reclaim expired leases: %1

  This error message indicates that the reclaim expired leases operation failed
  and provides the cause of failure.

**DHCP4_RELEASE**

%1: address %2 was released properly.

  This informational message indicates that an address was released properly. It
  is a normal operation during client shutdown. The first argument includes
  the client and transaction identification information. The second argument
  includes the released IPv4 address.

**DHCP4_RELEASE_EXCEPTION**

%1: while trying to release address %2 an exception occurred: %3

  This message is output when an error was encountered during an attempt
  to process a DHCPRELEASE message. The error will not affect the client,
  which does not expect any response from the server for DHCPRELEASE
  messages. Depending on the nature of problem, it may affect future
  server operation. The first argument includes the client and the
  transaction identification information. The second argument
  includes the IPv4 address which release was attempted. The last
  argument includes the detailed error description.

**DHCP4_RELEASE_FAIL**

%1: failed to remove lease for address %2

  This error message indicates that the software failed to remove a
  lease from the lease database. It is probably due to an error during a
  database operation: resolution will most likely require administrator
  intervention (e.g. check if DHCP process has sufficient privileges to
  update the database). It may also be triggered if a lease was manually
  removed from the database during RELEASE message processing. The
  first argument includes the client and the transaction identification
  information. The second argument holds the IPv4 address which release
  was attempted.

**DHCP4_RELEASE_FAIL_NO_LEASE**

%1: client is trying to release non-existing lease %2

  This debug message is printed when client attempts to release a lease,
  but no such lease is known to the server. The first argument contains
  the client and transaction identification information. The second
  argument contains the IPv4 address which the client is trying to
  release.

**DHCP4_RELEASE_FAIL_WRONG_CLIENT**

%1: client is trying to release the lease %2 which belongs to a different client

  This debug message is issued when a client is trying to release the
  lease for the address which is currently used by another client, i.e.
  the 'client identifier' or 'chaddr' doesn't match between the client
  and the lease. The first argument includes the client and the
  transaction identification information. The second argument specifies
  the leased address.

**DHCP4_RESERVATIONS_LOOKUP_FIRST_ENABLED**

Multi-threading is enabled and host reservations lookup is always performed first.

  This is a message informing that host reservations lookup is performed before
  lease lookup when multi-threading is enabled overwriting configured value.

**DHCP4_RESERVED_HOSTNAME_ASSIGNED**

%1: server assigned reserved hostname %2

  This debug message is issued when the server found a hostname reservation
  for a client and uses this reservation in a hostname option sent back
  to this client. The reserved hostname is qualified with a value
  of 'qualifying-suffix' parameter, if this parameter is specified.

**DHCP4_RESPONSE_DATA**

%1: responding with packet %2 (type %3), packet details: %4

  A debug message including the detailed data about the packet being sent
  to the client. The first argument contains the client and the transaction
  identification information. The second and third argument contains the
  packet name and type respectively. The fourth argument contains detailed
  packet information.

**DHCP4_RESPONSE_FQDN_DATA**

%1: including FQDN option in the server's response: %2

  This debug message is issued when the server is adding the Client FQDN
  option in its response to the client. The first argument includes the
  client and transaction identification information. The second argument
  includes the details of the FQDN option being included. Note that the
  name carried in the FQDN option may be modified by the server when
  the lease is acquired for the client.

**DHCP4_RESPONSE_HOSTNAME_DATA**

%1: including Hostname option in the server's response: %2

  This debug message is issued when the server is adding the Hostname
  option in its response to the client. The first argument includes the
  client and transaction identification information. The second argument
  includes the details of the FQDN option being included. Note that the
  name carried in the Hostname option may be modified by the server when
  the lease is acquired for the client.

**DHCP4_RESPONSE_HOSTNAME_GENERATE**

%1: server has generated hostname %2 for the client

  This debug message includes the auto-generated hostname which will be used
  for the client which message is processed. Hostnames may need to be generated
  when required by the server's configuration or when the client hasn't
  supplied its hostname. The first argument includes the client and the
  transaction identification information. The second argument holds the
  generated hostname.

**DHCP4_SERVER_FAILED**

server failed: %1

  The DHCPv4 server has encountered a fatal error and is terminating.
  The reason for the failure is included in the message.

**DHCP4_SHUTDOWN**

server shutdown

  The DHCPv4 server has terminated normally.

**DHCP4_SHUTDOWN_REQUEST**

shutdown of server requested

  This debug message indicates that a shutdown of the DHCPv4 server has
  been requested via a call to the 'shutdown' method of the core Dhcpv4Srv
  object.

**DHCP4_SRV_CONSTRUCT_ERROR**

error creating Dhcpv4Srv object, reason: %1

  This error message indicates that during startup, the construction of a
  core component within the DHCPv4 server (the Dhcpv4 server object)
  has failed.  As a result, the server will exit.  The reason for the
  failure is given within the message.

**DHCP4_SRV_D2STOP_ERROR**

error stopping IO with DHCP_DDNS during shutdown: %1

  This error message indicates that during shutdown, an error occurred while
  stopping IO between the DHCPv4 server and the DHCP_DDNS server.  This is
  probably due to a programmatic error is not likely to impact either server
  upon restart.  The reason for the failure is given within the message.

**DHCP4_SRV_DHCP4O6_ERROR**

error stopping IO with DHCPv4o6 during shutdown: %1

  This error message indicates that during shutdown, an error occurred while
  stopping IO between the DHCPv4 server and the DHCPv6o6 server.  This is
  probably due to a programmatic error is not likely to impact either server
  upon restart.  The reason for the failure is given within the message.

**DHCP4_SRV_UNLOAD_LIBRARIES_ERROR**

error unloading hooks libraries during shutdown: %1

  This error message indicates that during shutdown, unloading hooks
  libraries failed to close them. If the list of libraries is empty it is
  a programmatic error in the server code. If it is not empty it could be
  a programmatic error in one of the hooks libraries which could lead to
  a crash during finalization.

**DHCP4_STARTED**

Kea DHCPv4 server version %1 started

  This informational message indicates that the DHCPv4 server has
  processed all configuration information and is ready to process
  DHCPv4 packets.  The version is also printed.

**DHCP4_STARTING**

Kea DHCPv4 server version %1 (%2) starting

  This informational message indicates that the DHCPv4 server has
  processed any command-line switches and is starting. The version
  is also printed.

**DHCP4_START_INFO**

pid: %1, server port: %2, client port: %3, verbose: %4

  This is a debug message issued during the DHCPv4 server startup.
  It lists some information about the parameters with which the server
  is running.

**DHCP4_SUBNET_DATA**

%1: the selected subnet details: %2

  This debug message includes the details of the subnet selected for
  the client. The first argument includes the client and the
  transaction identification information. The second arguments
  includes the subnet details.

**DHCP4_SUBNET_DYNAMICALLY_CHANGED**

%1: changed selected subnet %2 to subnet %3 from shared network %4 for client assignments

  This debug message indicates that the server is using another subnet
  than initially selected for client assignments. This newly selected
  subnet belongs to the same shared network as the original subnet.
  Some reasons why the new subnet was selected include: address pool
  exhaustion in the original subnet or the fact that the new subnet
  includes some static reservations for this client.

**DHCP4_SUBNET_SELECTED**

%1: the subnet with ID %2 was selected for client assignments

  This is a debug message noting the selection of a subnet to be used for
  address and option assignment. Subnet selection is one of the early
  steps in the processing of incoming client message. The first
  argument includes the client and the transaction identification
  information. The second argument holds the selected subnet id.

**DHCP4_SUBNET_SELECTION_FAILED**

%1: failed to select subnet for the client

  This debug message indicates that the server failed to select the
  subnet for the client which has sent a message to the server.
  The server will not be able to offer any lease to the client and
  will drop its message if the received message was DHCPDISCOVER,
  and will send DHCPNAK if the received message was DHCPREQUEST.
  The argument includes the client and the transaction identification
  information.

**DHCP4_TESTING_MODE_SEND_TO_SOURCE_ENABLED**

All packets will be send to source address of an incoming packet - use only for testing

  This message is printed then KEA_TEST_SEND_RESPONSES_TO_SOURCE
  environment variable is set. It's causing Kea to send packets to
  source address of incoming packet. Usable just in testing environment
  to simulate multiple subnet traffic from single source.

**DHCP4_UNKNOWN_ADDRESS_REQUESTED**

%1: client requested an unknown address, client sent ciaddr %2, requested-ip-address %3

  This message indicates that the client requested an address that does
  not belong to any dynamic pools managed by this server.  The first argument
  contains the client and the transaction identification information.
  The second argument contains the IPv4 address in the ciaddr field. The
  third argument contains the IPv4 address in the requested-ip-address
  option (if present).

DHCP6
~~~~~

**DHCP6_ACTIVATE_INTERFACE**

activating interface %1

  This message is printed when DHCPv6 server enabled an interface to be used
  to receive DHCPv6 traffic. IPv6 socket on this interface will be opened once
  Interface Manager starts up procedure of opening sockets.

**DHCP6_ADD_GLOBAL_STATUS_CODE**

%1: adding Status Code to DHCPv6 packet: %2

  This message is logged when the server is adding the top-level
  Status Code option. The first argument includes the client and the
  transaction identification information. The second argument includes
  the details of the status code.

**DHCP6_ADD_STATUS_CODE_FOR_IA**

%1: adding Status Code to IA with iaid=%2: %3

  This message is logged when the server is adding the Status Code
  option to an IA. The first argument includes the client and the
  transaction identification information. The second argument specifies
  the IAID. The third argument includes the details of the status code.

**DHCP6_ALREADY_RUNNING**

%1 already running? %2

  This is an error message that occurs when the DHCPv6 server encounters
  a pre-existing PID file which contains the PID of a running process.
  This most likely indicates an attempt to start a second instance of
  the server using the same configuration file.  It is possible, though
  unlikely that the PID file is a remnant left behind by a server crash or
  power failure and the PID it contains refers to a process other than
  the server.  In such an event, it would be necessary to manually remove
  the PID file.  The first argument is the DHCPv6 process name, the second
  contains the PID and PID file.

**DHCP6_BUFFER_RECEIVED**

received buffer from %1:%2 to %3:%4 over interface %5

  This debug message is logged when the server has received a packet
  over the socket. When the message is logged the contents of the received
  packet hasn't been parsed yet. The only available information is the
  interface and the source and destination addresses/ports.

**DHCP6_BUFFER_UNPACK**

parsing buffer received from %1 to %2 over interface %3

  This debug message is issued when the server starts parsing the received
  buffer holding the DHCPv6 message. The arguments specify the source and
  destination addresses as well as the interface over which the buffer has
  been received.

**DHCP6_BUFFER_WAIT_SIGNAL**

signal received while waiting for next packet

  This debug message is issued when the server was waiting for the
  packet, but the wait has been interrupted by the signal received
  by the process. The signal will be handled before the server starts
  waiting for next packets.

**DHCP6_CB_ON_DEMAND_FETCH_UPDATES_FAIL**

error on demand attempt to fetch configuration updates from the configuration backend(s): %1

  This error message is issued when the server attempted to fetch
  configuration updates from the database and this on demand attempt failed.
  The sole argument which is returned to the config-backend-pull command
  caller too contains the reason for failure.

**DHCP6_CB_PERIODIC_FETCH_UPDATES_FAIL**

error on periodic attempt to fetch configuration updates from the configuration backend(s): %1

  This error message is issued when the server attempted to fetch
  configuration updates from the database and this periodic attempt failed.
  The server will re-try according to the configured value of the
  config-fetch-wait-time parameter. The sole argument contains the
  reason for failure.

**DHCP6_CB_PERIODIC_FETCH_UPDATES_RETRIES_EXHAUSTED**

maximum number of configuration fetch attempts: 10, has been exhausted without success

  This error indicates that the server has made a number of unsuccessful
  periodic attempts to fetch configuration updates from a configuration backend.
  The server will continue to operate but won't make any further attempts
  to fetch configuration updates. The administrator must fix the configuration
  in the database and reload (or restart) the server.

**DHCP6_CLASS_ASSIGNED**

%1: client packet has been assigned to the following class(es): %2

  This debug message informs that incoming packet has been assigned to specified
  class or classes. This is a normal behavior and indicates successful operation.
  The first argument specifies the client and transaction identification
  information. The second argument includes all classes to which the
  packet has been assigned.

**DHCP6_CLASS_UNCONFIGURED**

%1: client packet belongs to an unconfigured class: %2

  This debug message informs that incoming packet belongs to a class
  which cannot be found in the configuration. Either a hook written
  before the classification was added to Kea is used, or class naming is
  inconsistent.

**DHCP6_CLASS_UNDEFINED**

required class %1 has no definition

  This debug message informs that a class is listed for required evaluation but
  has no definition.

**DHCP6_CLASS_UNTESTABLE**

required class %1 has no test expression

  This debug message informs that a class was listed for required evaluation but
  its definition does not include a test expression to evaluate.

**DHCP6_COMMAND_RECEIVED**

received command %1, arguments: %2

  A debug message listing the command (and possible arguments) received
  from the Kea control system by the IPv6 DHCP server.

**DHCP6_CONFIG_COMPLETE**

DHCPv6 server has completed configuration: %1

  This is an informational message announcing the successful processing of a
  new configuration. it is output during server startup, and when an updated
  configuration is committed by the administrator.  Additional information
  may be provided.

**DHCP6_CONFIG_LOAD_FAIL**

configuration error using file: %1, reason: %2

  This error message indicates that the DHCPv6 configuration has failed.
  If this is an initial configuration (during server's startup) the server
  will fail to start. If this is a dynamic reconfiguration attempt the
  server will continue to use an old configuration.

**DHCP6_CONFIG_PACKET_QUEUE**

DHCPv6 packet queue info after configuration: %1

  This informational message is emitted during DHCPv6 server configuration,
  immediately after configuring the DHCPv6 packet queue.  The information
  shown depends upon the packet queue type selected.

**DHCP6_CONFIG_RECEIVED**

received configuration: %1

  A debug message listing the configuration received by the DHCPv6 server.
  The source of that configuration depends on used configuration backend.

**DHCP6_CONFIG_START**

DHCPv6 server is processing the following configuration: %1

  This is a debug message that is issued every time the server receives a
  configuration. That happens start up and also when a server configuration
  change is committed by the administrator.

**DHCP6_CONFIG_SYNTAX_WARNING**

configuration syntax warning: %1

  This warning message indicates that the DHCPv6 configuration had a minor
  syntax error. The error was displayed and the configuration parsing resumed.

**DHCP6_CONFIG_UNRECOVERABLE_ERROR**

DHCPv6 server new configuration failed with an error which cannot be recovered

  This fatal error message is issued when a new configuration raised an error
  which cannot be recovered. A correct configuration must be applied as soon
  as possible as the server is no longer working.
  The configuration can be fixed in several ways. If the control channel
  is open, config-set with a valid configuration can be
  used. Alternatively, the original config file on disk could be fixed
  and SIGHUP signal could be sent (or the config-reload command
  issued). Finally, the server could be restarted completely.

**DHCP6_CONFIG_UNSUPPORTED_OBJECT**

DHCPv6 server configuration includes an unsupported object: %1

  This error message is issued when the configuration includes an unsupported
  object (i.e. a top level element).

**DHCP6_CONFIG_UPDATE**

updated configuration received: %1

  A debug message indicating that the IPv6 DHCP server has received an
  updated configuration from the Kea configuration system.

**DHCP6_DB_BACKEND_STARTED**

lease database started (type: %1, name: %2)

  This informational message is printed every time the IPv6 DHCP server
  is started.  It indicates what database backend type is being to store
  lease and other information.

**DHCP6_DB_RECONNECT_DISABLED**

database reconnect is disabled: max-reconnect-tries %1, reconnect-wait-time %2

  This is an informational message indicating that connectivity to either the
  lease or host database or both and that automatic reconnect is not enabled.

**DHCP6_DB_RECONNECT_FAILED**

maximum number of database reconnect attempts: %1, has been exhausted without success

  This error indicates that the server failed to reconnect to the lease and/or
  host database(s) after making the maximum configured number of reconnect
  attempts. This might cause the server to shut down as specified in the
  configuration. Loss of connectivity is typically a network or database server
  issue.

**DHCP6_DB_RECONNECT_LOST_CONNECTION**

database connection lost.

  This info message indicates that the connection has been lost and the dhcp
  service might have been disabled, as specified in the configuration, in order to
  try to recover the connection.

**DHCP6_DB_RECONNECT_NO_DB_CTL**

unexpected error in database reconnect

  This is an error message indicating a programmatic error that should not
  occur. It prohibits the server from attempting to reconnect to its
  databases if connectivity is lost, and the server exits. This error
  should be reported.

**DHCP6_DB_RECONNECT_SUCCEEDED**

database connection recovered.

  This info message indicates that the connection has been recovered and the dhcp
  service has been restored.

**DHCP6_DDNS_CREATE_ADD_NAME_CHANGE_REQUEST**

created name change request: %1

  This debug message is logged when the new NameChangeRequest has been created
  to perform the DNS Update, which adds new RRs.

**DHCP6_DDNS_FQDN_GENERATED**

%1: generated FQDN for the client: %2

  This debug message is logged when the server generated FQDN (name)
  for the client which message is processed. The names may be
  generated by the server when required by the server's policy or
  when the client doesn't provide any specific FQDN in its message
  to the server. The first argument includes the client and
  transaction identification information. The second argument includes
  the generated FQDN.

**DHCP6_DDNS_GENERATED_FQDN_UPDATE_FAIL**

%1: failed to update the lease using address %2, after generating FQDN for a client, reason: %3

  This message indicates the failure when trying to update the lease and/or
  options in the server's response with the hostname generated by the server
  from the acquired address. The first argument includes the client and the
  transaction identification information. The second argument is a leased
  address. The third argument includes the reason for the failure.

**DHCP6_DDNS_GENERATE_FQDN**

%1: client did not send a FQDN option; FQDN will be

  generated for the client.
  This debug message is issued when the server did not receive a FQDN option
  from the client and client name replacement is enabled.  This provides a means
  to create DNS entries for unsophisticated clients.

**DHCP6_DDNS_RECEIVE_FQDN**

%1: received DHCPv6 Client FQDN option: %2

  This debug message is logged when server has found the DHCPv6 Client FQDN Option
  sent by a client and started processing it. The first argument includes the
  client and transaction identification information. The second argument
  includes the received FQDN.

**DHCP6_DDNS_REMOVE_OLD_LEASE_FQDN**

%1: FQDN for a lease: %2 has changed. New values: hostname = %3, reverse mapping = %4, forward mapping = %5

  This debug message is logged during lease renewal when an old lease that is
  no longer being offered has a different FQDN than the renewing lease. Thus
  the old DNS entries need to be removed.  The first argument includes the client
  and the transaction identification information. The second argument holds the
  details about the lease for which the FQDN information and/or mappings have
  changed. The remaining arguments hold the new FQDN information and flags for
  mappings.

**DHCP6_DDNS_REQUEST_SEND_FAILED**

failed sending a request to kea-dhcp-ddns, error: %1,  ncr: %2

  This error message indicates that IPv6 DHCP server failed to send a DDNS
  update request to the DHCP-DDNS server. This is most likely a configuration or
  networking error.

**DHCP6_DDNS_RESPONSE_FQDN_DATA**

%1: including FQDN option in the server's response: %2

  This debug message is issued when the server is adding the Client FQDN
  option in its response to the client. The first argument includes the
  client and transaction identification information. The second argument
  includes the details of the FQDN option being included. Note that the
  name carried in the FQDN option may be modified by the server when
  the lease is acquired for the client.

**DHCP6_DDNS_SEND_FQDN**

sending DHCPv6 Client FQDN Option to the client: %1

  This debug message is logged when server includes an DHCPv6 Client FQDN Option
  in its response to the client.

**DHCP6_DEACTIVATE_INTERFACE**

deactivate interface %1

  This message is printed when DHCPv6 server disables an interface from being
  used to receive DHCPv6 traffic. Sockets on this interface will not be opened
  by the Interface Manager until interface is enabled.

**DHCP6_DECLINE_FAIL**

%1: error on decline lease for address %2: %3

  This error message indicates that the software failed to decline a
  lease from the lease database due to an error during a database
  operation. The first argument includes the client and the transaction
  identification information. The second argument holds the IPv6 address
  which decline was attempted. The last one contains the reason for
  failure.

**DHCP6_DECLINE_FAIL_DUID_MISMATCH**

Client %1 sent DECLINE for address %2, but it belongs to client with DUID %3

  This informational message is printed when a client attempts to decline
  a lease, but that lease belongs to a different client. The decline request
  will be rejected.

**DHCP6_DECLINE_FAIL_IAID_MISMATCH**

Client %1 sent DECLINE for address %2, but used a wrong IAID (%3), instead of expected %4

  This informational message is printed when a client attempts to decline
  a lease. The server has a lease for this address, it belongs to this client,
  but the recorded IAID does not match what client has sent. This means
  the server will reject this Decline.

**DHCP6_DECLINE_FAIL_LEASE_WITHOUT_DUID**

Client %1 sent DECLINE for address %2, but the associated lease has no DUID

  This error condition likely indicates database corruption, as every IPv6
  lease is supposed to have a DUID, even if it is an empty one.

**DHCP6_DECLINE_FAIL_NO_LEASE**

Client %1 sent DECLINE for address %2, but there's no lease for it

  This informational message is printed when a client tried to decline an address,
  but the server has no lease for said address. This means that the server's
  and client's perception of the leases are different. The likely causes
  of this could be: a confused (e.g. skewed clock) or broken client (e.g. client
  moved to a different location and didn't notice) or possibly an attack
  (a rogue client is trying to decline random addresses). The server will
  inform the client that his decline request was rejected and client should
  be able to recover from that.

**DHCP6_DECLINE_LEASE**

Client %1 sent DECLINE for address %2 and the server marked it as declined. The lease will be recovered in %3 seconds.

  This informational message indicates that the client leased an address, but
  discovered that it is being used by some other device and reported this to the
  server by sending a Decline message. The server marked the lease as
  declined. This likely indicates a misconfiguration in the network. Either
  the server is configured with an incorrect pool or there are devices that have
  statically assigned addresses that are supposed to be assigned by the DHCP
  server. Both client (will request a different address) and server (will recover
  the lease after decline-probation-time elapses) will recover automatically.
  However, if the underlying problem is not solved, the conditions leading
  to this message may reappear.

**DHCP6_DECLINE_PROCESS_IA**

Processing of IA (IAID: %1) from client %2 started.

  This debug message is printed when the server starts processing an IA_NA option
  received in Decline message. It's expected that the option will contain an
  address that is being declined. Specific information will be printed in a
  separate message.

**DHCP6_DEVELOPMENT_VERSION**

This software is a development branch of Kea. It is not recommended for production use.

  This warning message is displayed when the version is a development
  (vs stable) one: the second number of the version is odd.

**DHCP6_DHCP4O6_PACKET_RECEIVED**

received DHCPv4o6 packet from DHCPv4 server (type %1) for %2 port %3 on interface %4

  This debug message is printed when the server is receiving a DHCPv4o6
  from the DHCPv4 server over inter-process communication.

**DHCP6_DHCP4O6_RECEIVE_FAIL**

failed to receive DHCPv4o6: %1

  This debug message indicates the inter-process communication with the
  DHCPv4 server failed. The reason for the error is included in
  the message.

**DHCP6_DHCP4O6_RECEIVING**

receiving DHCPv4o6 packet from DHCPv4 server

  This debug message is printed when the server is receiving a DHCPv4o6
  from the DHCPv4 server over inter-process communication socket.

**DHCP6_DHCP4O6_SEND_FAIL**

failed to send DHCPv4o6 packet: %1

  This error is output if the IPv6 DHCP server fails to send an assembled
  DHCPv4o6 message to a client. The reason for the error is included in the
  message.

**DHCP6_DYNAMIC_RECONFIGURATION**

initiate server reconfiguration using file: %1, after receiving SIGHUP signal or config-reload command

  This is the info message logged when the DHCPv6 server starts reconfiguration
  as a result of receiving SIGHUP signal or config-reload command.

**DHCP6_DYNAMIC_RECONFIGURATION_FAIL**

dynamic server reconfiguration failed with file: %1

  This is a fatal error message logged when the dynamic reconfiguration of the
  DHCP server failed.

**DHCP6_DYNAMIC_RECONFIGURATION_SUCCESS**

dynamic server reconfiguration succeeded with file: %1

  This is info message logged when the dynamic reconfiguration of the DHCP server
  succeeded.

**DHCP6_FLEX_ID**

flexible identifier generated for incoming packet: %1

  This debug message is printed when host reservation type is set to flexible identifier
  and the expression specified in its configuration generated (was evaluated to)
  an identifier for incoming packet. This debug message is mainly intended as a
  debugging assistance for flexible identifier.

**DHCP6_HANDLE_SIGNAL_EXCEPTION**

An exception was thrown while handing signal: %1

  This error message is printed when an exception was raised during signal
  processing. This likely indicates a coding error and should be reported to ISC.

**DHCP6_HOOKS_LIBS_RELOAD_FAIL**

reload of hooks libraries failed

  A "libreload" command was issued to reload the hooks libraries but for
  some reason the reload failed.  Other error messages issued from the
  hooks framework will indicate the nature of the problem.

**DHCP6_HOOK_BUFFER_RCVD_DROP**

received buffer from %1 to %2 over interface %3 was dropped because a callout set the drop flag

  This debug message is printed when a callout installed on buffer6_receive
  hook point set the drop flag. For this particular hook point, the
  setting of the flag by a callout instructs the server to drop the packet.
  The arguments specify the source and destination address as well as
  the name of the interface over which the buffer has been received.

**DHCP6_HOOK_BUFFER_RCVD_SKIP**

received buffer from %1 to %2 over interface %3 is not parsed because a callout set the next step to SKIP

  This debug message is printed when a callout installed on
  buffer6_receive hook point set the next step status to skip. For this particular
  hook point, this value set by a callout instructs the server to
  not parse the buffer because it was already parsed by the hook. The
  arguments specify the source and destination address as well as the
  name of the interface over which the buffer has been received.

**DHCP6_HOOK_BUFFER_SEND_SKIP**

%1: prepared DHCPv6 response was dropped because a callout set the next step to SKIP

  This debug message is printed when a callout installed on buffer6_send
  hook point set the next step to SKIP value. For this particular hook point, the
  SKIP setting a callout instructs the server to drop the packet.
  Server completed all the processing (e.g. may have assigned, updated
  or released leases), but the response will not be send to the client.
  The argument includes the client and transaction identification
  information.

**DHCP6_HOOK_DDNS_UPDATE**

A hook has updated the DDNS parameters: hostname %1=>%2, forward update %3=>%4, reverse update %5=>%6

  This message indicates that there was a hook called on ddns6_update hook point
  and that hook updated the DDNS update parameters: hostname, or whether to
  conduct forward (A record) or reverse (PTR record) DDNS updates.

**DHCP6_HOOK_DECLINE_DROP**

During Decline processing (client=%1, interface=%2, addr=%3) hook callout set next step to DROP, dropping packet.

  This message indicates that the server received DECLINE message, it was verified
  to be correct and matching server's lease information. The server called hooks
  for the lease6_decline hook point and one of the callouts set next step status to DROP.
  The server will now abort processing of the packet as if it was never
  received. The lease will continue to be assigned to this client.

**DHCP6_HOOK_DECLINE_SKIP**

During Decline processing (client=%1, interface=%2, addr=%3) hook callout set status to SKIP, skipping decline.

  This message indicates that the server received DECLINE message, it was verified
  to be correct and matching server's lease information. The server called hooks
  for the lease6_decline hook point and one of the callouts set next step status to SKIP.
  The server will skip the operation of moving the lease to the declined state and
  will continue processing the packet. In particular, it will send a REPLY message
  as if the decline actually took place.

**DHCP6_HOOK_LEASE6_RELEASE_NA_SKIP**

%1: DHCPv6 address lease was not released because a callout set the next step to SKIP

  This debug message is printed when a callout installed on the
  lease6_release hook point set the next step to SKIP. For this particular hook
  point, this setting by a callout instructs the server to not
  release a lease. If a client requested the release of multiples leases
  (by sending multiple IA options), the server will retain this particular
  lease and proceed with other releases as usual. The argument holds the
  client and transaction identification information.

**DHCP6_HOOK_LEASE6_RELEASE_PD_SKIP**

%1: prefix lease was not released because a callout set the next step to SKIP

  This debug message is printed when a callout installed on lease6_release
  hook point set the next step to SKIP value. For this particular hook point, that
  setting by a callout instructs the server to not release
  a lease. If client requested release of multiples leases (by sending
  multiple IA options), the server will retains this particular lease and
  will proceed with other renewals as usual. The argument holds the
  client and transaction identification information.

**DHCP6_HOOK_LEASES6_COMMITTED_DROP**

%1: packet is dropped, because a callout set the next step to DROP

  This debug message is printed when a callout installed on the leases6_committed
  hook point sets the next step to DROP.

**DHCP6_HOOK_LEASES6_COMMITTED_PARK**

%1: packet is parked, because a callout set the next step to PARK

  This debug message is printed when a callout installed on the leases6_committed
  hook point sets the next step to PARK.

**DHCP6_HOOK_LEASES6_PARKING_LOT_FULL**

The parked-packet-limit %1, has been reached, dropping query: %2

  This debug message occurs when the parking lot used to hold client queries
  while hook library work for them completes has reached or exceeded the
  limit set by the parked-packet-limit global parameter. This can occur when
  kea-dhcp6 is using hook libraries (e.g. HA) that implement the
  "leases6-committed" callout and client queries are arriving faster than
  those callouts can fulfill them.

**DHCP6_HOOK_PACKET_RCVD_SKIP**

%1: packet is dropped, because a callout set the next step to SKIP

  This debug message is printed when a callout installed on the pkt6_receive
  hook point sets the next step to SKIP. For this particular hook point, the
  value setting instructs the server to drop the packet.

**DHCP6_HOOK_PACKET_SEND_DROP**

%1: prepared DHCPv6 response was not sent because a callout set the next ste to DROP

  This debug message is printed when a callout installed on the pkt6_send
  hook point set the next step to DROP. For this particular hook point, the setting
  of the value by a callout instructs the server to drop the packet. This
  effectively means that the client will not get any response, even though
  the server processed client's request and acted on it (e.g. possibly
  allocated a lease). The argument specifies the client and transaction
  identification information.

**DHCP6_HOOK_PACKET_SEND_SKIP**

%1: prepared DHCPv6 response is not built because a callout set the next step to SKIP

  This debug message is printed when a callout installed on the
  pkt6_send hook point set the next step to SKIP. For this particular hook
  point, the setting of the value by a callout instructs the server to
  not build the wire data (pack) because it was already done by the
  book. The argument specifies the client and transaction identification
  information.

**DHCP6_HOOK_SUBNET6_SELECT_DROP**

%1: packet was dropped because a callout set the drop flag

  This debug message is printed when a callout installed on the
  subnet6_select hook point set the drop flag. For this particular hook
  point, the setting of the flag instructs the server to drop the
  received packet. The argument holds the client and transaction
  identification information.

**DHCP6_HOOK_SUBNET6_SELECT_SKIP**

%1: no subnet was selected because a callout set the next step to SKIP

  This debug message is printed when a callout installed on the
  subnet6_select hook point set the next step to SKIP value. For this particular hook
  point, the setting of this value instructs the server not to choose a
  subnet, an action that severely limits further processing; the server
  will be only able to offer global options - no addresses or prefixes
  will be assigned. The argument holds the client and transaction
  identification information.

**DHCP6_INIT_FAIL**

failed to initialize Kea server: %1

  The server has failed to establish communication with the rest of Kea,
  failed to read JSON configuration file or encountered any other critical
  issue that prevents it from starting up properly. Attached error message
  provides more details about the issue.

**DHCP6_LEASE_ADVERT**

%1: lease for address %2 and iaid=%3 will be advertised

  This informational message indicates that the server will advertise an
  address to the client in the ADVERTISE message. The client will
  request allocation of this address with the REQUEST message sent
  in the next message exchange. The first argument includes the client
  and transaction identification information. The remaining arguments
  hold the allocated address and IAID.

**DHCP6_LEASE_ADVERT_FAIL**

%1: failed to advertise an address lease for iaid=%2

  This message indicates that in response to a received SOLICIT, the server
  failed to advertise a non-temporary lease for a given client. There may
  be many reasons for such failure. Each failure is logged in a separate
  log entry. The first argument holds the client and transaction identification
  information. The second argument holds the IAID.

**DHCP6_LEASE_ALLOC**

%1: lease for address %2 and iaid=%3 has been allocated for %4 seconds

  This informational message indicates that in response to a client's REQUEST
  message, the server successfully granted a non-temporary address
  lease. This is a normal behavior and indicates successful operation.
  The first argument includes the client and transaction identification
  information. The remaining arguments hold the allocated address,
  IAID and validity lifetime.

**DHCP6_LEASE_ALLOC_FAIL**

%1: failed to grant an address lease for iaid=%2

  This message indicates that in response to a received REQUEST, the server
  failed to grant a non-temporary address lease for the client. There may
  be many reasons for such failure. Each failure is logged in a separate
  log entry. The first argument holds the client and transaction identification
  information. The second argument holds the IAID.

**DHCP6_LEASE_DATA**

%1: detailed lease information for iaid=%2: %3

  This debug message is used to print the detailed information about the
  allocated lease or a lease which will be advertised to the client.
  The first argument holds the client and the transaction identification
  information. The second argument holds the IAID. The third argument
  holds the detailed lease information.

**DHCP6_LEASE_NA_WITHOUT_DUID**

%1: address lease for address %2 does not have a DUID

  This error message indicates a database consistency problem. The lease
  database has an entry indicating that the given address is in use,
  but the lease does not contain any client identification. This is most
  likely due to a software error: please raise a bug report. As a temporary
  workaround, manually remove the lease entry from the database. The first
  argument includes the client and transaction identification information.
  The second argument holds the address to be released.

**DHCP6_LEASE_PD_WITHOUT_DUID**

%1: lease for prefix %2/%3 does not have a DUID

  This error message indicates a database consistency failure. The lease
  database has an entry indicating that the given prefix is in use,
  but the lease does not contain any client identification. This is most
  likely due to a software error: please raise a bug report. As a temporary
  workaround, manually remove the lease entry from the database. The
  first argument includes client and transaction identification
  information. The second and third argument hold the prefix and the
  prefix length.

**DHCP6_LEASE_RENEW**

%1: lease for address %2 and iaid=%3 has been allocated

  This informational message indicates that in response to a client's REQUEST
  message, the server successfully renewed a non-temporary address
  lease. This is a normal behavior and indicates successful operation.
  The first argument includes the client and transaction identification
  information. The remaining arguments hold the allocated address and
  IAID.

**DHCP6_LEASE_REUSE**

%1: lease for address %2 and iaid=%3 has been reused for %4 seconds

  This informational message indicates that in response to a client's
  message, the server successfully reused a non-temporary address
  lease. This is a normal behavior and indicates successful operation.
  The first argument includes the client and transaction identification
  information. The remaining arguments hold the allocated address,
  IAID and validity lifetime.

**DHCP6_MULTI_THREADING_INFO**

enabled: %1, number of threads: %2, queue size: %3

  This is a message listing some information about the multi-threading parameters
  with which the server is running.

**DHCP6_NOT_RUNNING**

IPv6 DHCP server is not running

  A warning message is issued when an attempt is made to shut down the
  IPv6 DHCP server but it is not running.

**DHCP6_NO_INTERFACES**

failed to detect any network interfaces

  During startup the IPv6 DHCP server failed to detect any network
  interfaces and is therefore shutting down.

**DHCP6_NO_SOCKETS_OPEN**

no interface configured to listen to DHCP traffic

  This warning message is issued when current server configuration specifies
  no interfaces that server should listen on, or specified interfaces are not
  configured to receive the traffic.

**DHCP6_OPEN_SOCKET**

opening service sockets on port %1

  A debug message issued during startup, this indicates that the IPv6 DHCP
  server is about to open sockets on the specified port.

**DHCP6_OPEN_SOCKETS_FAILED**

maximum number of open service sockets attempts: %1, has been exhausted without success

  This error indicates that the server failed to bind service sockets after making
  the maximum configured number of reconnect attempts. This might cause the server
  to shut down as specified in the configuration.

**DHCP6_OPEN_SOCKETS_NO_RECONNECT_CTL**

unexpected error in bind service sockets.

  This is an error message indicating a programmatic error that should not occur.
  It prohibits the server from attempting to bind to its service sockets if they
  are unavailable, and the server exits. This error should be reported.

**DHCP6_OPEN_SOCKET_FAIL**

failed to open socket: %1

  A warning message issued when IfaceMgr fails to open and bind a socket. The reason
  for the failure is appended as an argument of the log message.

**DHCP6_PACKET_DROP_DHCP_DISABLED**

%1: DHCP service is globally disabled

  This debug message is issued when a packet is dropped because the DHCP service
  has been temporarily disabled. This affects all received DHCP packets. The
  service may be enabled by the "dhcp-enable" control command or automatically
  after a specified amount of time since receiving "dhcp-disable" command.

**DHCP6_PACKET_DROP_DROP_CLASS**

dropped as member of the special class 'DROP': %1

  This debug message is emitted when an incoming packet was classified
  into the special class 'DROP' and dropped. The packet details are displayed.

**DHCP6_PACKET_DROP_DROP_CLASS2**

dropped as member of the special class 'DROP' after host reservation lookup: %1

  This debug message is emitted when an incoming packet was classified
  after host reservation lookup into the special class 'DROP' and dropped.
  The packet details are displayed.

**DHCP6_PACKET_DROP_DROP_CLASS_EARLY**

dropped as member of the special class 'DROP' after early global host reservations lookup: %1

  This debug message is emitted when an incoming packet was classified
  after early global host reservations lookup into the special class 'DROP'
  and dropped. The packet details are displayed.

**DHCP6_PACKET_DROP_DUPLICATE**

dropped as sent by the same client than a packet being processed by another thread: dropped %1 by thread %2 as duplicate of %3 processed by %4

  Currently multi-threading processing avoids races between packets sent by
  the same client by dropping new packets until processing is finished.
  Packet details and thread identifiers are included for both packets in
  this warning message.

**DHCP6_PACKET_DROP_PARSE_FAIL**

failed to parse packet from %1 to %2, received over interface %3, reason: %4

  The DHCPv6 server has received a packet that it is unable to
  interpret. The reason why the packet is invalid is included in the message.

**DHCP6_PACKET_DROP_SERVERID_MISMATCH**

%1: dropping packet with server identifier: %2, server is using: %3

  A debug message noting that server has received message with server identifier
  option that not matching server identifier that server is using.

**DHCP6_PACKET_DROP_UNICAST**

%1: dropping unicast %2 packet as this packet should be sent to multicast

  This debug message is issued when the server drops the unicast packet,
  because packets of this type must be sent to multicast. The first argument
  specifies the client and transaction identification information, the
  second argument specifies packet type.

**DHCP6_PACKET_OPTIONS_SKIPPED**

An error unpacking an option, caused subsequent options to be skipped: %1

  A debug message issued when an option failed to unpack correctly, making it
  impossible to unpack the remaining options in the packet.  The server will
  server will still attempt to service the packet.

**DHCP6_PACKET_PROCESS_EXCEPTION**

exception occurred during packet processing

  This error message indicates that a non-standard exception was raised
  during packet processing that was not caught by other, more specific
  exception handlers. This packet will be dropped and the server will
  continue operation.

**DHCP6_PACKET_PROCESS_FAIL**

processing of %1 message received from %2 failed: %3

  This is a general catch-all message indicating that the processing of the
  specified packet type from the indicated address failed.  The reason is given in the
  message.  The server will not send a response but will instead ignore the packet.

**DHCP6_PACKET_PROCESS_STD_EXCEPTION**

exception occurred during packet processing: %1

  This error message indicates that a standard exception was raised
  during packet processing that was not caught by other, more specific
  exception handlers. This packet will be dropped and the server will
  continue operation.

**DHCP6_PACKET_QUEUE_FULL**

multi-threading packet queue is full

  A debug message noting that the multi-threading packet queue is full so
  the oldest packet of the queue was dropped to make room for the received one.

**DHCP6_PACKET_RECEIVED**

%1: %2 (type %3) received from %4 to %5 on interface %6

  A debug message noting that the server has received the specified type of
  packet on the specified interface. The first argument specifies the
  client and transaction identification information. The second and third
  argument specify the name of the DHCPv6 message and its numeric type
  respectively. The remaining arguments specify the source address,
  destination IP address and the name of the interface on which the
  message has been received.

**DHCP6_PACKET_RECEIVE_FAIL**

error on attempt to receive packet: %1

  The IPv6 DHCP server tried to receive a packet but an error
  occurred during this attempt. The reason for the error is included in
  the message.

**DHCP6_PACKET_SEND**

%1: trying to send packet %2 (type %3) from [%4]:%5 to [%6]:%7 on interface %8

  The arguments specify the client identification information (HW address
  and client identifier), DHCP message name and type, source IPv6
  address and port, destination IPv6 address and port and the
  interface name.

**DHCP6_PACKET_SEND_FAIL**

failed to send DHCPv6 packet: %1

  This error is output if the IPv6 DHCP server fails to send an assembled
  DHCP message to a client. The reason for the error is included in the
  message.

**DHCP6_PACK_FAIL**

failed to assemble response correctly

  This error is output if the server failed to assemble the data to be
  returned to the client into a valid packet.  The reason is most likely
  to be to a programming error: please raise a bug report.

**DHCP6_PARSER_COMMIT_EXCEPTION**

parser failed to commit changes

  On receipt of message containing details to a change of the IPv6 DHCP
  server configuration, a set of parsers were successfully created, but one
  of them failed to commit its changes due to a low-level system exception
  being raised.  Additional messages may be output indicating the reason.

**DHCP6_PARSER_COMMIT_FAIL**

parser failed to commit changes: %1

  On receipt of message containing details to a change of the IPv6 DHCP
  server configuration, a set of parsers were successfully created, but
  one of them failed to commit its changes.  The reason for the failure
  is given in the message.

**DHCP6_PARSER_EXCEPTION**

failed to create or run parser for configuration element %1

  On receipt of message containing details to a change of its configuration,
  the IPv6 DHCP server failed to create a parser to decode the contents of
  the named configuration element, or the creation succeeded but the parsing
  actions and committal of changes failed.  The message has been output in
  response to a non-Kea exception being raised.  Additional messages
  may give further information.
  The most likely cause of this is that the specification file for the
  server (which details the allowable contents of the configuration) is
  not correct for this version of Kea.  This may be the result of an
  interrupted installation of an update to Kea.

**DHCP6_PARSER_FAIL**

failed to create or run parser for configuration element %1: %2

  On receipt of message containing details to a change of its configuration,
  the IPv6 DHCP server failed to create a parser to decode the contents
  of the named configuration element, or the creation succeeded but the
  parsing actions and committal of changes failed.  The reason for the
  failure is given in the message.

**DHCP6_PD_LEASE_ADVERT**

%1: lease for prefix %2/%3 and iaid=%4 will be advertised

  This informational message indicates that the server will advertise a
  prefix to the client in the ADVERTISE message. The client will
  request allocation of this prefix with the REQUEST message sent
  in the next message exchange. The first argument includes the client
  and transaction identification information. The remaining arguments
  hold the allocated prefix, prefix length and IAID.

**DHCP6_PD_LEASE_ADVERT_FAIL**

%1: failed to advertise a prefix lease for iaid=%2

  This message indicates that in response to a received SOLICIT, the
  server failed to advertise a prefix lease for a given client. There may
  be many reasons for such failure. Each failure is logged in a separate
  log entry. The first argument holds the client and transaction identification
  information. The second argument holds the IAID.

**DHCP6_PD_LEASE_ALLOC**

%1: lease for prefix %2/%3 and iaid=%4 has been allocated for %5 seconds

  This informational message indicates that in response to a client's REQUEST
  message, the server successfully granted a prefix lease.
  This is a normal behavior and indicates successful operation.
  The first argument includes the client and transaction identification
  information. The remaining arguments hold the allocated prefix,
  prefix length, IAID and validity lifetime.

**DHCP6_PD_LEASE_ALLOC_FAIL**

%1: failed to grant a prefix lease for iaid=%2

  This message indicates that in response to a received REQUEST, the server
  failed to grant a prefix lease for the client. There may be many reasons
  for such failure. Each failure is logged in a separate log entry. The first
  argument holds the client and transaction identification information.
  The second argument holds the IAID.

**DHCP6_PD_LEASE_RENEW**

%1: lease for prefix %2/%3 and iaid=%4 has been allocated

  This informational message indicates that in response to a client's REQUEST
  message, the server successfully renewed a prefix lease.
  This is a normal behavior and indicates successful operation.
  The first argument includes the client and transaction identification
  information. The remaining arguments hold the allocated prefix,
  prefix length and IAID.

**DHCP6_PD_LEASE_REUSE**

%1: lease for prefix %2/%3 and iaid=%4 has been reused for %5 seconds

  This informational message indicates that in response to a client's
  message, the server successfully reused a prefix lease.
  This is a normal behavior and indicates successful operation.
  The first argument includes the client and transaction identification
  information. The remaining arguments hold the allocated prefix,
  prefix length, IAID and validity lifetime.

**DHCP6_PROCESS_IA_NA_EXTEND**

%1: extending lease lifetime for IA_NA option with iaid=%2

  This message is logged when the server is starting to extend the lifetime
  of the address lease associated with the particular IAID. The first argument
  includes the client and transaction identification information. The second
  argument contains the IAID.

**DHCP6_PROCESS_IA_NA_RELEASE**

%1: releasing lease for IA_NA option with iaid=%2

  This message is logged when the server is trying to release the client's
  as a result of receiving the RELEASE message. The first argument
  includes the client and transaction identification information. The second
  argument contains the IAID.

**DHCP6_PROCESS_IA_NA_REQUEST**

%1: server is processing IA_NA option with iaid=%2 and hint=%3

  This is a debug message that indicates the processing of a received
  IA_NA option. The first argument contains the client and the transaction
  identification information. The second argument holds the IAID of the
  IA_NA option. The third argument may hold the hint for the server
  about the address that the client would like to have allocated.
  If there is no hint, the argument should provide the text indicating
  that the hint hasn't been sent.

**DHCP6_PROCESS_IA_PD_EXTEND**

%1: extending lease lifetime for IA_PD option with iaid=%2

  This message is logged when the server is starting to extend the lifetime
  of the prefix lease associated with the particular IAID. The first argument
  includes the client and transaction identification information. The second
  argument contains the IAID.

**DHCP6_PROCESS_IA_PD_REQUEST**

%1: server is processing IA_PD option with iaid=%2 and hint=%3

  This is a debug message that indicates a processing of received IA_PD
  option. The first argument contains the client and the transaction
  identification information. The second argument holds the IAID of the
  IA_PD option. The third argument may hold the hint for the server
  about the prefix that the client would like to have allocated.
  If there is no hint, the argument should provide the text indicating
  that the hint hasn't been sent.

**DHCP6_QUERY_DATA**

%1, packet details: %2

  A debug message printing the details of the received packet. The first
  argument includes the client and the transaction identification
  information.

**DHCP6_RAPID_COMMIT**

%1: Rapid Commit option received, following 2-way exchange

  This debug message is issued when the server found a Rapid Commit option
  in the client's message and 2-way exchanges are supported by the
  server for the subnet on which the client is connected. The argument
  specifies the client and transaction identification information.

**DHCP6_RECLAIM_EXPIRED_LEASES_FAIL**

failed to reclaim expired leases: %1

  This error message indicates that the reclaim expired leases operation failed
  and provides the cause of failure.

**DHCP6_RELEASE_NA**

%1: binding for address %2 and iaid=%3 was released properly

  This informational message indicates that an address was released properly. It
  is a normal operation during client shutdown.

**DHCP6_RELEASE_NA_FAIL**

%1: failed to remove address lease for address %2 and iaid=%3

  This error message indicates that the software failed to remove an address
  lease from the lease database.  It probably due to an error during a
  database operation: resolution will most likely require administrator
  intervention (e.g. check if DHCP process has sufficient privileges to
  update the database). It may also be triggered if a lease was manually
  removed from the database during RELEASE message processing. The first
  argument holds the client and transaction identification information.
  The second and third argument hold the released address and IAID
  respectively.

**DHCP6_RELEASE_NA_FAIL_WRONG_DUID**

%1: client tried to release address %2, but it belongs to another client using duid=%3

  This warning message indicates that a client tried to release an address
  that belongs to a different client. This should not happen in normal
  circumstances and may indicate a misconfiguration of the client.  However,
  since the client releasing the address will stop using it anyway, there
  is a good chance that the situation will correct itself.

**DHCP6_RELEASE_NA_FAIL_WRONG_IAID**

%1: client tried to release address %2, but it used wrong IAID (expected %3, but got %4)

  This warning message indicates that client tried to release an address
  that does belong to it, but the address was expected to be in a different
  IA (identity association) container. This probably means that the client's
  support for multiple addresses is flawed.

**DHCP6_RELEASE_PD**

%1: prefix %2/%3 for iaid=%4 was released properly

  This informational message indicates that a prefix was released properly. It
  is a normal operation during client shutdown. The first argument holds
  the client and transaction identification information. The second and
  third argument define the prefix and its length. The fourth argument
  holds IAID.

**DHCP6_RELEASE_PD_FAIL**

%1: failed to release prefix %2/%3 for iaid=%4

  This error message indicates that the software failed to remove a prefix
  lease from the lease database.  It probably due to an error during a
  database operation: resolution will most likely require administrator
  intervention (e.g. check if DHCP process has sufficient privileges to
  update the database). It may also be triggered if a lease was manually
  removed from the database during RELEASE message processing. The
  first argument hold the client and transaction identification
  information. The second and third argument define the prefix and
  its length. The fourth argument holds the IAID.

**DHCP6_RELEASE_PD_FAIL_WRONG_DUID**

%1: client tried to release prefix %2/%3, but it belongs to another client (duid=%4)

  This warning message indicates that client tried to release a prefix
  that belongs to a different client. This should not happen in normal
  circumstances and may indicate a misconfiguration of the client.  However,
  since the client releasing the prefix will stop using it anyway, there
  is a good chance that the situation will correct itself. The first
  argument includes the client and the transaction identification
  information. The second and third argument include the prefix and
  prefix length. The last argument holds the DUID of the client holding
  the lease.

**DHCP6_RELEASE_PD_FAIL_WRONG_IAID**

%1: client tried to release prefix %2/%3, but it used wrong IAID (expected %4, but got %5)

  This warning message indicates that client tried to release a prefix
  that does belong to it, but the address was expected to be in a different
  IA (identity association) container. This probably means that the client's
  support for multiple prefixes is flawed. The first argument includes the
  client and transaction identification information. The second and third
  argument identify the prefix. The fourth and fifth argument hold the
  expected IAID and IAID found respectively.

**DHCP6_REQUIRED_OPTIONS_CHECK_FAIL**

%1 message received from %2 failed the following check: %3

  This message indicates that received DHCPv6 packet is invalid.  This may be due
  to a number of reasons, e.g. the mandatory client-id option is missing,
  the server-id forbidden in that particular type of message is present,
  there is more than one instance of client-id or server-id present,
  etc. The exact reason for rejecting the packet is included in the message.

**DHCP6_RESERVATIONS_LOOKUP_FIRST_ENABLED**

Multi-threading is enabled and host reservations lookup is always performed first.

  This is a message informing that host reservations lookup is performed before
  lease lookup when multi-threading is enabled overwriting configured value.

**DHCP6_RESPONSE_DATA**

responding with packet type %1 data is %2

  A debug message listing the data returned to the client.

**DHCP6_SERVER_FAILED**

server failed: %1

  The IPv6 DHCP server has encountered a fatal error and is terminating.
  The reason for the failure is included in the message.

**DHCP6_SHUTDOWN**

server shutdown

  The IPv6 DHCP server has terminated normally.

**DHCP6_SHUTDOWN_REQUEST**

shutdown of server requested

  This debug message indicates that a shutdown of the IPv6 server has
  been requested via a call to the 'shutdown' method of the core Dhcpv6Srv
  object.

**DHCP6_SOCKET_UNICAST**

server is about to open socket on address %1 on interface %2

  This is a debug message that inform that a unicast socket will be opened.

**DHCP6_SRV_CONSTRUCT_ERROR**

error creating Dhcpv6Srv object, reason: %1

  This error message indicates that during startup, the construction of a
  core component within the IPv6 DHCP server (the Dhcpv6 server object)
  has failed.  As a result, the server will exit.  The reason for the
  failure is given within the message.

**DHCP6_SRV_D2STOP_ERROR**

error stopping IO with DHCP_DDNS during shutdown: %1

  This error message indicates that during shutdown, an error occurred while
  stopping IO between the DHCPv6 server and the DHCP_DDNS server.  This is
  probably due to a programmatic error is not likely to impact either server
  upon restart.  The reason for the failure is given within the message.

**DHCP6_SRV_UNLOAD_LIBRARIES_ERROR**

error unloading hooks libraries during shutdown: %1

  This error message indicates that during shutdown, unloading hooks
  libraries failed to close them. If the list of libraries is empty it is
  a programmatic error in the server code. If it is not empty it could be
  a programmatic error in one of the hooks libraries which could lead to
  a crash during finalization.

**DHCP6_STANDALONE**

skipping message queue, running standalone

  This is a debug message indicating that the IPv6 server is running in
  standalone mode, not connected to the message queue.  Standalone mode
  is only useful during program development, and should not be used in a
  production environment.

**DHCP6_STARTED**

Kea DHCPv6 server version %1 started

  This informational message indicates that the IPv6 DHCP server has
  processed all configuration information and is ready to process
  DHCPv6 packets.  The version is also printed.

**DHCP6_STARTING**

Kea DHCPv6 server version %1 (%2) starting

  This informational message indicates that the IPv6 DHCP server has
  processed any command-line switches and is starting. The version
  is also printed.

**DHCP6_START_INFO**

pid: %1, server port: %2, client port: %3, verbose: %4

  This is a debug message issued during the IPv6 DHCP server startup.
  It lists some information about the parameters with which the server
  is running.

**DHCP6_SUBNET_DATA**

%1: the selected subnet details: %2

  This debug message includes the details of the subnet selected for
  the client. The first argument includes the client and the
  transaction identification information. The second argument
  includes the subnet details.

**DHCP6_SUBNET_DYNAMICALLY_CHANGED**

%1: changed selected subnet %2 to subnet %3 from shared network %4 for client assignments

  This debug message indicates that the server is using another subnet
  than initially selected for client assignments. This newly selected
  subnet belongs to the same shared network as the original subnet.
  Some reasons why the new subnet was selected include: address pool
  exhaustion in the original subnet or the fact that the new subnet
  includes some static reservations for this client.

**DHCP6_SUBNET_SELECTED**

%1: the subnet with ID %2 was selected for client assignments

  This is a debug message noting the selection of a subnet to be used for
  address and option assignment. Subnet selection is one of the early
  steps in the processing of incoming client message. The first
  argument includes the client and the transaction identification
  information. The second argument holds the selected subnet id.

**DHCP6_SUBNET_SELECTION_FAILED**

%1: failed to select subnet for the client

  This debug message indicates that the server failed to select the
  subnet for the client which has sent a message to the server.
  The cause is likely due to a misconfiguration of the server. The packet
  processing will continue, but the response will only contain generic
  configuration and no addresses or prefixes. The argument includes
  the client and the transaction identification information.

**DHCP6_UNKNOWN_MSG_RECEIVED**

received unknown message (type %1) on interface %2

  This debug message is printed when server receives a message of unknown type.
  That could either mean missing functionality or invalid or broken relay or client.
  The list of formally defined message types is available here:
  http://www.iana.org/assignments/dhcpv6-parameters.

DHCPSRV
~~~~~~~

**DHCPSRV_CFGMGR_ADD_IFACE**

listening on interface %1

  An info message issued when a new interface is being added to the collection of
  interfaces on which the server listens to DHCP messages.

**DHCPSRV_CFGMGR_ADD_SUBNET4**

adding subnet %1

  A debug message reported when the DHCP configuration manager is adding the
  specified IPv4 subnet to its database.

**DHCPSRV_CFGMGR_ADD_SUBNET6**

adding subnet %1

  A debug message reported when the DHCP configuration manager is adding the
  specified IPv6 subnet to its database.

**DHCPSRV_CFGMGR_ALL_IFACES_ACTIVE**

enabling listening on all interfaces

  A debug message issued when the server is being configured to listen on all
  interfaces.

**DHCPSRV_CFGMGR_CFG_DHCP_DDNS**

Setting DHCP-DDNS configuration to: %1

  A debug message issued when the server's DHCP-DDNS settings are changed.

**DHCPSRV_CFGMGR_CLEAR_ACTIVE_IFACES**

stop listening on all interfaces

  A debug message issued when configuration manager clears the internal list
  of active interfaces. This doesn't prevent the server from listening to
  the DHCP traffic through open sockets, but will rather be used by Interface
  Manager to select active interfaces when sockets are re-opened.

**DHCPSRV_CFGMGR_CONFIG4_MERGED**

Configuration backend data has been merged.

  This is an informational message emitted when the DHCPv4 server has
  successfully merged configuration data retrieved from its configuration
  backends into the current configuration.

**DHCPSRV_CFGMGR_CONFIG6_MERGED**

Configuration backend data has been merged.

  This is an informational message emitted when the DHCPv6 server has
  successfully merged configuration data retrieved from its configuration
  backends into the current configuration.

**DHCPSRV_CFGMGR_CONFIGURE_SERVERID**

server configuration includes specification of a server identifier

  This warning message is issued when the server specified configuration of
  a server identifier. If this new configuration overrides an existing
  server identifier, this will affect existing bindings of the clients.
  Clients will use old server identifier when they renew their bindings.
  The server will not respond to those renews, and the clients will
  eventually transition to rebinding state. The server should reassign
  existing bindings and the clients will subsequently use new server
  identifier. It is recommended to not modify the server identifier, unless
  there is a good reason for it, to avoid increased number of renewals and
  a need for rebinding (increase of multicast traffic, which may be received
  by multiple servers).

**DHCPSRV_CFGMGR_DDNS_PARAMETER_IGNORED**

dhcp-ddns:%1 is deprecated, using existing global:%2

  This is an informational message issued during configuration parsing when
  the server detects that a deprecated parameter has been specified in the
  "dhcp-ddns" element which conflicts with its corresponding global parameter.
  When this occurs the server simply ignores the value from dhcp-ddns.
  The log message shows be the deprecated and the supported parameter names.
  Note the configuration change only affects the in-memory configuration.
  Modify the configuration to comply with the supported parameters.

**DHCPSRV_CFGMGR_DDNS_PARAMETER_MOVED**

dhcp-ddns:%1 is deprecated, moving it to global:%2

  This is an informational message issued during configuration parsing when
  the server detects that a deprecated parameter has been specified in the
  "dhcp-ddns" element for which no corresponding global value exists. When
  this occurs, the server removes the parameter from dhcp-ddns and inserts the
  parameter into the global scope. The log message shows the deprecated
  and the supported parameter names.  Note the configuration change only affects
  the in-memory configuration. Modify the configuration to comply with
  the supported parameters.

**DHCPSRV_CFGMGR_DEL_SUBNET4**

IPv4 subnet %1 removed

  This debug message is issued when a subnet is successfully removed from the
  server configuration. The argument identifies the removed subnet.

**DHCPSRV_CFGMGR_DEL_SUBNET6**

IPv6 subnet %1 removed

  This debug message is issued when a subnet is successfully removed from the
  server configuration. The argument identifies the removed subnet.

**DHCPSRV_CFGMGR_IPV4_RESERVATIONS_NON_UNIQUE_IGNORED**

ignoring "ip-reservations-unique" setting because at least one of the host database backends does not support non-unique IP reservations in a subnet

  This warning message is issued when the server failed to use the new setting
  of the ip-reservations-unique global parameter configured via the configuration
  backend. Some host database backends used apparently do not support specifying
  several reservations for the same IP address in a subnet. The administrator
  should either stop using the backend that does not support this setting or set
  the value of the ip-reservations-unique to true to resolve the configuration
  issue.

**DHCPSRV_CFGMGR_IPV6_RESERVATIONS_NON_UNIQUE_IGNORED**

ignoring "ip-reservations-unique" setting because at least one of the host database backends does not support non unique IP reservations in a subnet

  This warning message is issued when the server failed to use the new setting
  of the ip-reservations-unique global parameter configured via the configuration
  backend. Some host database backends used apparently do not support specifying
  several reservations for the same IP address or delegated prefix in a subnet.
  The administrator should either stop using the backend that does not support
  this setting or set the value of the ip-reservations-unique to true to resolve
  the configuration issue.

**DHCPSRV_CFGMGR_IP_RESERVATIONS_UNIQUE_DUPLICATES_POSSIBLE**

setting "ip-reservations-unique" from false to true poses a risk that some host backends may still contain multiple reservations for the same IP address

  This warning message is issued when the DHCP server is configured to not allow
  multiple reservations for the same IP address. However, the host database
  backends may still contain multiple reservations for the same IP addresses
  causing problems with lease allocation for certain addresses. Please ensure
  that all such duplicates are removed.

**DHCPSRV_CFGMGR_NEW_SUBNET4**

a new subnet has been added to configuration: %1

  This is an informational message reporting that the configuration has
  been extended to include the specified IPv4 subnet.

**DHCPSRV_CFGMGR_NEW_SUBNET6**

a new subnet has been added to configuration: %1

  This is an informational message reporting that the configuration has
  been extended to include the specified subnet.

**DHCPSRV_CFGMGR_NO_SUBNET4**

no suitable subnet is defined for address hint %1

  This debug message is output when the DHCP configuration manager has received
  a request for an IPv4 subnet for the specified address, but no such
  subnet exists.

**DHCPSRV_CFGMGR_NO_SUBNET6**

no suitable subnet is defined for address hint %1

  This debug message is output when the DHCP configuration manager has received
  a request for an IPv6 subnet for the specified address, but no such
  subnet exists.

**DHCPSRV_CFGMGR_ONLY_SUBNET4**

retrieved subnet %1 for address hint %2

  This is a debug message reporting that the DHCP configuration manager has
  returned the specified IPv4 subnet when given the address hint specified
  because it is the only subnet defined.

**DHCPSRV_CFGMGR_ONLY_SUBNET6**

retrieved subnet %1 for address hint %2

  This is a debug message reporting that the DHCP configuration manager has
  returned the specified IPv6 subnet when given the address hint specified
  because it is the only subnet defined.

**DHCPSRV_CFGMGR_OPTION_DUPLICATE**

multiple options with the code: %1 added to the subnet: %2

  This warning message is issued on an attempt to configure multiple options with the
  same option code for the particular subnet. Adding multiple options is uncommon
  for DHCPv6, but it is not prohibited.

**DHCPSRV_CFGMGR_RELAY_IP_ADDRESS_DEPRECATED**

"relay" uses "ip-address", which has been deprecated, please use "ip-addresses": %1

  This is debug message issued when the "relay" element being parse
  contains "ip-address" rather than its replacement, "ip-addresses".
  The server will still honor the value but users are encouraged to
  move to the new list parameter.

**DHCPSRV_CFGMGR_SOCKET_RAW_UNSUPPORTED**

use of raw sockets is unsupported on this OS, UDP sockets will be used

  This warning message is logged when the user specified that the
  DHCPv4 server should use the raw sockets to receive the DHCP
  messages and respond to the clients, but the use of raw sockets
  is not supported on the particular environment. The raw sockets
  are useful when the server must respond to the directly connected
  clients which don't have an address yet. If the raw sockets are
  not supported by Kea on the particular platform, Kea will fall
  back to use of the IP/UDP sockets. The responses to
  the directly connected clients will be broadcast. The responses
  to relayed clients will be unicast as usual.

**DHCPSRV_CFGMGR_SOCKET_TYPE_DEFAULT**

"dhcp-socket-type" not specified , using default socket type %1

  This informational message is logged when the administrator hasn't
  specified the "dhcp-socket-type" parameter in configuration for interfaces.
  In such case, the default socket type will be used.

**DHCPSRV_CFGMGR_SOCKET_TYPE_SELECT**

using socket type %1

  This informational message is logged when the DHCPv4 server selects the
  socket type to be used for all sockets that will be opened on the
  interfaces. Typically, the socket type is specified by the server
  administrator. If the socket type hasn't been specified, the raw
  socket will be selected. If the raw socket has been selected but
  Kea doesn't support the use of raw sockets on the particular
  OS, it will use an UDP socket instead.

**DHCPSRV_CFGMGR_SUBNET4**

retrieved subnet %1 for address hint %2

  This is a debug message reporting that the DHCP configuration manager has
  returned the specified IPv4 subnet when given the address hint specified
  as the address is within the subnet.

**DHCPSRV_CFGMGR_SUBNET4_ADDR**

selected subnet %1 for packet received by matching address %2

  This is a debug message reporting that the DHCP configuration manager
  has returned the specified IPv4 subnet for a received packet. This particular
  subnet was selected, because an IPv4 address was matched which belonged to that
  subnet.

**DHCPSRV_CFGMGR_SUBNET4_IFACE**

selected subnet %1 for packet received over interface %2

  This is a debug message reporting that the DHCP configuration manager
  has returned the specified IPv4 subnet for a packet received over
  the given interface.  This particular subnet was selected, because it
  was specified as being directly reachable over the given interface. (see
  'interface' parameter in the subnet4 definition).

**DHCPSRV_CFGMGR_SUBNET4_RELAY**

selected subnet %1, because of matching relay addr %2

  This is a debug message reporting that the DHCP configuration manager has
  returned the specified IPv4 subnet, because detected relay agent address
  matches value specified for this subnet.

**DHCPSRV_CFGMGR_SUBNET6**

retrieved subnet %1 for address hint %2

  This is a debug message reporting that the DHCP configuration manager has
  returned the specified IPv6 subnet when given the address hint specified
  as the address is within the subnet.

**DHCPSRV_CFGMGR_SUBNET6_IFACE**

selected subnet %1 for packet received over interface %2

  This is a debug message reporting that the DHCP configuration manager
  has returned the specified IPv6 subnet for a packet received over
  given interface.  This particular subnet was selected, because it
  was specified as being directly reachable over given interface. (see
  'interface' parameter in the subnet6 definition).

**DHCPSRV_CFGMGR_SUBNET6_IFACE_ID**

selected subnet %1 (interface-id match) for incoming packet

  This is a debug message reporting that the DHCP configuration manager
  has returned the specified IPv6 subnet for a received packet. This particular
  subnet was selected, because value of interface-id option matched what was
  configured in the server's interface-id option for that selected subnet6.
  (see 'interface-id' parameter in the subnet6 definition).

**DHCPSRV_CFGMGR_SUBNET6_RELAY**

selected subnet %1, because of matching relay addr %2

  This is a debug message reporting that the DHCP configuration manager has
  returned the specified IPv6 subnet, because detected relay agent address
  matches value specified for this subnet.

**DHCPSRV_CFGMGR_UNICAST_LINK_LOCAL**

specified link local address %1 for unicast traffic on interface %2

  This warning message is logged when user specified a link-local address to
  receive unicast traffic. The warning message is issued because it is an
  uncommon use.

**DHCPSRV_CFGMGR_UPDATE_SUBNET4**

updating subnet %1 (result %2)

  A debug message reported when the DHCP configuration manager is updating the
  specified IPv4 subnet in its current configuration. Subnet ID and result
  (expected to be true) are displayed.

**DHCPSRV_CFGMGR_UPDATE_SUBNET6**

updating subnet %1 (result %2)

  A debug message reported when the DHCP configuration manager is replacing the
  specified IPv6 subnet in its current configuration.  Subnet ID and result
  (expected to be true) are displayed.

**DHCPSRV_CFGMGR_USE_ADDRESS**

listening on address %1, on interface %2

  A message issued when the server is configured to listen on the explicitly specified
  IP address on the given interface.

**DHCPSRV_CFGMGR_USE_UNICAST**

listening on unicast address %1, on interface %2

  An info message issued when configuring the DHCP server to listen on the unicast
  address on the specific interface.

**DHCPSRV_CLOSE_DB**

closing currently open %1 database

  This is a debug message, issued when the DHCP server closes the currently
  open lease database.  It is issued at program shutdown and whenever
  the database access parameters are changed: in the latter case, the
  server closes the currently open database, and opens a database using
  the new parameters.

**DHCPSRV_DEPRECATED**

This configuration is using a deprecated feature: %1

  This warning is printed every time a deprecated feature (identified by the parameter) is
  used. A deprecated feature is functional now, but there will be a future Kea release
  where it will be completely removed. If you see this message it's not a reason for panic,
  but you should consider your long term strategy to eventually stop using the deprecated
  feature.

**DHCPSRV_DHCP4O6_RECEIVED_BAD_PACKET**

received bad DHCPv4o6 packet: %1

  A bad DHCPv4o6 packet was received.

**DHCPSRV_DHCP_DDNS_ERROR_EXCEPTION**

error handler for DHCP_DDNS IO generated an expected exception: %1

  This is an error message that occurs when an attempt to send a request to
  kea-dhcp-ddns fails there registered error handler threw an uncaught exception.
  This is a programmatic error which should not occur. By convention, the error
  handler should not propagate exceptions. Please report this error.

**DHCPSRV_DHCP_DDNS_HANDLER_NULL**

error handler for DHCP_DDNS IO is not set.

  This is an error message that occurs when an attempt to send a request to
  kea-dhcp-ddns fails and there is no registered error handler.  This is a
  programmatic error which should never occur and should be reported.

**DHCPSRV_DHCP_DDNS_NCR_REJECTED**

NameChangeRequest rejected by the sender: %1, ncr: %2

  This is an error message indicating that NameChangeSender used to deliver DDNS
  update requests to kea-dhcp-ddns rejected the request.  This most likely cause
  is the sender's queue has reached maximum capacity.  This would imply that
  requests are being generated faster than they can be delivered.

**DHCPSRV_DHCP_DDNS_NCR_SENT**

NameChangeRequest sent to kea-dhcp-ddns: %1

  A debug message issued when a NameChangeRequest has been successfully sent to
  kea-dhcp-ddns.

**DHCPSRV_DHCP_DDNS_SENDER_STARTED**

NameChangeRequest sender has been started: %1

  An informational message issued when a communication with kea-dhcp-ddns has
  been successfully started.

**DHCPSRV_DHCP_DDNS_SENDER_STOPPED**

NameChangeRequest sender has been stopped.

  An informational message issued when a communication with kea-dhcp-ddns has
  been stopped. This normally occurs during reconfiguration and as part of normal
  shutdown. It may occur if kea-dhcp-ddns communications break down.

**DHCPSRV_DHCP_DDNS_SUSPEND_UPDATES**

DHCP_DDNS updates are being suspended.

  This is a warning message indicating the DHCP_DDNS updates have been turned
  off.  This should only occur if IO errors communicating with kea-dhcp-ddns
  have been experienced.  Any such errors should have preceding entries in the
  log with details.  No further attempts to communicate with kea-dhcp-ddns will
  be made without intervention.

**DHCPSRV_HOOK_LEASE4_RECOVER_SKIP**

DHCPv4 lease %1 was not recovered from the declined state because a callout set the skip status.

  This debug message is printed when a callout installed on lease4_recover
  hook point set the next step status to SKIP. For this particular hook point, this
  indicates that the server should not recover the lease from declined state.
  The server will leave the lease as it is, in the declined state. The
  server will attempt to recover it the next time decline recovery procedure
  takes place.

**DHCPSRV_HOOK_LEASE4_RENEW_SKIP**

DHCPv4 lease was not renewed because a callout set the skip flag.

  This debug message is printed when a callout installed on lease4_renew
  hook point set the skip flag. For this particular hook point, the setting
  of the flag by a callout instructs the server to not renew a lease. The
  server will use existing lease as it is, without extending its lifetime.

**DHCPSRV_HOOK_LEASE4_SELECT_SKIP**

Lease4 creation was skipped, because of callout skip flag.

  This debug message is printed when a callout installed on lease4_select
  hook point sets the skip flag. It means that the server was told that
  no lease4 should be assigned. The server will not put that lease in its
  database and the client will get a NAK packet.

**DHCPSRV_HOOK_LEASE6_EXTEND_SKIP**

DHCPv6 lease lifetime was not extended because a callout set the skip flag for message %1

  This debug message is printed when a callout installed on lease6_renew
  or the lease6_rebind hook point set the skip flag. For this particular hook
  point, the setting of the flag by a callout instructs the server to not
  extend the lifetime for a lease. If the client requested renewal of multiple
  leases (by sending multiple IA options), the server will skip the renewal
  of the one in question and will proceed with other renewals as usual.

**DHCPSRV_HOOK_LEASE6_RECOVER_SKIP**

DHCPv6 lease %1 was not recovered from declined state because a callout set the skip status.

  This debug message is printed when a callout installed on lease6_recover
  hook point set the next step status to SKIP. For this particular hook point, this
  indicates that the server should not recover the lease from declined state.
  The server will leave the lease as it is, in the declined state. The
  server will attempt to recover it the next time decline recovery procedure
  takes place.

**DHCPSRV_HOOK_LEASE6_SELECT_SKIP**

Lease6 (non-temporary) creation was skipped, because of callout skip flag.

  This debug message is printed when a callout installed on lease6_select
  hook point sets the skip flag. It means that the server was told that
  no lease6 should be assigned. The server will not put that lease in its
  database and the client will get a NoAddrsAvail for that IA_NA option.

**DHCPSRV_INVALID_ACCESS**

invalid database access string: %1

  This is logged when an attempt has been made to parse a database access string
  and the attempt ended in error.  The access string in question - which
  should be of the form 'keyword=value keyword=value...' is included in
  the message.

**DHCPSRV_LEASE_SANITY_FAIL**

The lease %1 with subnet-id %2 failed subnet-id checks (%3).

  This warning message is printed when the lease being loaded does not match the
  configuration. Due to lease-checks value, the lease will be loaded, but
  it will most likely be unused by Kea, as there is no subnet that matches
  the IP address associated with the lease.

**DHCPSRV_LEASE_SANITY_FAIL_DISCARD**

The lease %1 with subnet-id %2 failed subnet-id checks (%3) and was dropped.

  This warning message is printed when a lease was loaded, but Kea was told
  (by setting lease-checks parameter) to discard leases with inconsistent
  data. The lease was discarded, because either there is no subnet configured
  with matching subnet-id or the address of the lease does not belong to the
  subnet.

**DHCPSRV_LEASE_SANITY_FIXED**

The lease %1 with subnet-id %2 failed subnet-id checks, but was corrected to subnet-id %3.

  This informational message is printed when a lease was loaded, but had
  incorrect subnet-id value. The lease-checks parameter was set to a value
  that told Kea to try to correct the problem. There is a matching subnet,
  so Kea updated subnet-id and loaded the lease successfully.

**DHCPSRV_MEMFILE_ADD_ADDR4**

adding IPv4 lease with address %1

  A debug message issued when the server is about to add an IPv4 lease
  with the specified address to the memory file backend database.

**DHCPSRV_MEMFILE_ADD_ADDR6**

adding IPv6 lease with address %1

  A debug message issued when the server is about to add an IPv6 lease
  with the specified address to the memory file backend database.

**DHCPSRV_MEMFILE_BEGIN_TRANSACTION**

committing to memory file database

  The code has issued a begin transaction call.  For the memory file database, this is
  a no-op.

**DHCPSRV_MEMFILE_COMMIT**

committing to memory file database

  The code has issued a commit call.  For the memory file database, this is
  a no-op.

**DHCPSRV_MEMFILE_CONVERTING_LEASE_FILES**

running LFC now to convert lease files to the current schema: %1.%2

  A warning message issued when the server has detected lease files that need
  to be either upgraded or downgraded to match the server's schema, and that
  the server is automatically running the LFC process to perform the conversion.
  This should only occur the first time the server is launched following a Kea
  installation upgrade (or downgrade).

**DHCPSRV_MEMFILE_DB**

opening memory file lease database: %1

  This informational message is logged when a DHCP server (either V4 or
  V6) is about to open a memory file lease database.  The parameters of
  the connection including database name and username needed to access it
  (but not the password if any) are logged.

**DHCPSRV_MEMFILE_DELETE_ADDR**

deleting lease for address %1

  A debug message issued when the server is attempting to delete a lease
  for the specified address from the memory file database for the specified
  address.

**DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED4**

deleting reclaimed IPv4 leases that expired more than %1 seconds ago

  A debug message issued when the server is removing reclaimed DHCPv4
  leases which have expired longer than a specified period of time.
  The argument is the amount of time Kea waits after a reclaimed
  lease expires before considering its removal.

**DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED6**

deleting reclaimed IPv6 leases that expired more than %1 seconds ago

  A debug message issued when the server is removing reclaimed DHCPv6
  leases which have expired longer than a specified period of time.
  The argument is the amount of time Kea waits after a reclaimed
  lease expires before considering its removal.

**DHCPSRV_MEMFILE_DELETE_EXPIRED_RECLAIMED_START**

starting deletion of %1 expired-reclaimed leases

  A debug message issued when the server has found expired-reclaimed
  leases to be removed. The number of leases to be removed is logged
  in the message.

**DHCPSRV_MEMFILE_GET4**

obtaining all IPv4 leases

  A debug message issued when the server is attempting to obtain all IPv4
  leases from the memory file database.

**DHCPSRV_MEMFILE_GET6**

obtaining all IPv6 leases

  A debug message issued when the server is attempting to obtain all IPv6
  leases from the memory file database.

**DHCPSRV_MEMFILE_GET6_DUID**

obtaining IPv6 leases for DUID %1

  A debug message issued when the server is attempting to obtain IPv6
  leases from the memory file database for the DUID.

**DHCPSRV_MEMFILE_GET_ADDR4**

obtaining IPv4 lease for address %1

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the memory file database for the specified address.

**DHCPSRV_MEMFILE_GET_ADDR6**

obtaining IPv6 lease for address %1 and lease type %2

  A debug message issued when the server is attempting to obtain an IPv6
  lease from the memory file database for the specified address.

**DHCPSRV_MEMFILE_GET_CLIENTID**

obtaining IPv4 leases for client ID %1

  A debug message issued when the server is attempting to obtain a set of
  IPv4 leases from the memory file database for a client with the specified
  client identification.

**DHCPSRV_MEMFILE_GET_EXPIRED4**

obtaining maximum %1 of expired IPv4 leases

  A debug message issued when the server is attempting to obtain expired
  IPv4 leases to reclaim them. The maximum number of leases to be retrieved
  is logged in the message.

**DHCPSRV_MEMFILE_GET_EXPIRED6**

obtaining maximum %1 of expired IPv6 leases

  A debug message issued when the server is attempting to obtain expired
  IPv6 leases to reclaim them. The maximum number of leases to be retrieved
  is logged in the message.

**DHCPSRV_MEMFILE_GET_HOSTNAME4**

obtaining IPv4 leases for hostname %1

  A debug message issued when the server is attempting to obtain a set of
  IPv4 leases from the memory file database for a client with the specified
  hostname.

**DHCPSRV_MEMFILE_GET_HOSTNAME6**

obtaining IPv6 leases for hostname %1

  A debug message issued when the server is attempting to obtain a set of
  IPv6 leases from the memory file database for a client with the specified
  hostname.

**DHCPSRV_MEMFILE_GET_HWADDR**

obtaining IPv4 leases for hardware address %1

  A debug message issued when the server is attempting to obtain a set of
  IPv4 leases from the memory file database for a client with the specified
  hardware address.

**DHCPSRV_MEMFILE_GET_IAID_DUID**

obtaining IPv6 leases for IAID %1 and DUID %2 and lease type %3

  A debug message issued when the server is attempting to obtain a set of IPv6
  leases from the memory file database for a client with the specified IAID
  (Identity Association ID) and DUID (DHCP Unique Identifier).

**DHCPSRV_MEMFILE_GET_IAID_SUBID_DUID**

obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3 and lease type %4

  A debug message issued when the server is attempting to obtain an IPv6
  lease from the memory file database for a client with the specified IAID
  (Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier).

**DHCPSRV_MEMFILE_GET_PAGE4**

obtaining at most %1 IPv4 leases starting from address %2

  A debug message issued when the server is attempting to obtain a page
  of leases beginning with the specified address.

**DHCPSRV_MEMFILE_GET_PAGE6**

obtaining at most %1 IPv6 leases starting from address %2

  A debug message issued when the server is attempting to obtain a page
  of leases beginning with the specified address.

**DHCPSRV_MEMFILE_GET_SUBID4**

obtaining IPv4 leases for subnet ID %1

  A debug message issued when the server is attempting to obtain all IPv4
  leases for a given subnet identifier from the memory file database.

**DHCPSRV_MEMFILE_GET_SUBID6**

obtaining IPv6 leases for subnet ID %1

  A debug message issued when the server is attempting to obtain all IPv6
  leases for a given subnet identifier from the memory file database.

**DHCPSRV_MEMFILE_GET_SUBID_CLIENTID**

obtaining IPv4 lease for subnet ID %1 and client ID %2

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the memory file database for a client with the specified
  subnet ID and client ID.

**DHCPSRV_MEMFILE_GET_SUBID_HWADDR**

obtaining IPv4 lease for subnet ID %1 and hardware address %2

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the memory file database for a client with the specified
  subnet ID and hardware address.

**DHCPSRV_MEMFILE_GET_VERSION**

obtaining schema version information

  A debug message issued when the server is about to obtain schema version
  information from the memory file database.

**DHCPSRV_MEMFILE_LEASE_FILE_LOAD**

loading leases from file %1

  An info message issued when the server is about to start reading DHCP leases
  from the lease file. All leases currently held in the memory will be
  replaced by those read from the file.

**DHCPSRV_MEMFILE_LEASE_LOAD**

loading lease %1

  A debug message issued when DHCP lease is being loaded from the file to memory.

**DHCPSRV_MEMFILE_LEASE_LOAD_ROW_ERROR**

discarding row %1, error: %2

  An error message issued if the DHCP lease being loaded from the given row of
  the lease file fails. The log message should contain the specific reason the
  row was discarded. The server continues loading the remaining data.
  This may indicate a corrupt lease file.

**DHCPSRV_MEMFILE_LFC_EXECUTE**

executing Lease File Cleanup using: %1

  An informational message issued when the memfile lease database backend
  starts a new process to perform Lease File Cleanup.

**DHCPSRV_MEMFILE_LFC_LEASE_FILE_RENAME_FAIL**

failed to rename the current lease file %1 to %2, reason: %3

  An error message logged when the memfile lease database backend fails to
  move the current lease file to a new file on which the cleanup should
  be performed. This effectively means that the lease file cleanup
  does not take place.

**DHCPSRV_MEMFILE_LFC_LEASE_FILE_REOPEN_FAIL**

failed to reopen lease file %1 after preparing input file for lease file cleanup, reason: %2, new leases will not persist!

  An error message logged when the memfile lease database backend
  failed to re-open or re-create the lease file after renaming the
  lease file for lease file cleanup. The server continues to
  operate but leases do not persist to disk.

**DHCPSRV_MEMFILE_LFC_SETUP**

setting up the Lease File Cleanup interval to %1 sec

  An informational message logged when the memfile lease database backend
  configures the LFC to be executed periodically. The argument holds the
  interval in seconds in which the LFC will be executed.

**DHCPSRV_MEMFILE_LFC_SPAWN_FAIL**

lease file cleanup failed to run because kea-lfc process couldn't be spawned

  This error message is logged when the Kea server fails to run kea-lfc,
  the program that cleans up the lease file. The server will try again the
  next time a lease file cleanup is scheduled. Although this message should
  not appear and the reason why it did investigated, the occasional failure
  to start the lease file cleanup will not impact operations. Should the
  failure persist however, the size of the lease file will increase without bound.

**DHCPSRV_MEMFILE_LFC_START**

starting Lease File Cleanup

  An informational message issued when the Memfile lease database backend
  starts the periodic Lease File Cleanup.

**DHCPSRV_MEMFILE_LFC_UNREGISTER_TIMER_FAILED**

failed to unregister timer 'memfile-lfc': %1

  This debug message is logged when Memfile backend fails to unregister
  timer used for lease file cleanup scheduling. There are several reasons
  why this could occur, although the most likely cause is that the system
  is being shut down and some other component has unregistered the timer.
  The message includes the reason for this error.

**DHCPSRV_MEMFILE_NEEDS_DOWNGRADING**

version of lease file: %1 schema is later than version %2

  A warning message issued when the schema of the lease file loaded by the server
  is newer than the memfile schema of the server.  The server converts the lease
  data from newer schemas to its schema as it is read, therefore the lease
  information in use by the server will be correct. Note though, that any data
  stored in newer schema fields will be dropped.  What remains is for the
  file itself to be rewritten using the current schema.

**DHCPSRV_MEMFILE_NEEDS_UPGRADING**

version of lease file: %1 schema is earlier than version %2

  A warning message issued when the schema of the lease file loaded by the server
  pre-dates the memfile schema of the server.  Note that the server converts the
  lease data from older schemas to the current schema as it is read, therefore
  the lease information in use by the server will be correct.  What remains is
  for the file itself to be rewritten using the current schema.

**DHCPSRV_MEMFILE_NO_STORAGE**

running in non-persistent mode, leases will be lost after restart

  A warning message issued when writes of leases to disk have been disabled
  in the configuration. This mode is useful for some kinds of performance
  testing but should not be enabled in normal circumstances. Non-persistence
  mode is enabled when 'persist4=no persist6=no' parameters are specified
  in the database access string.

**DHCPSRV_MEMFILE_READ_HWADDR_FAIL**

failed to read hardware address from lease file: %1

  A warning message issued when read attempt of the hardware address stored in
  a disk file failed. The parameter should provide the exact nature of the failure.
  The database read will continue, but that particular lease will no longer
  have hardware address associated with it.

**DHCPSRV_MEMFILE_ROLLBACK**

rolling back memory file database

  The code has issued a rollback call.  For the memory file database, this is
  a no-op.

**DHCPSRV_MEMFILE_UPDATE_ADDR4**

updating IPv4 lease for address %1

  A debug message issued when the server is attempting to update IPv4
  lease from the memory file database for the specified address.

**DHCPSRV_MEMFILE_UPDATE_ADDR6**

updating IPv6 lease for address %1

  A debug message issued when the server is attempting to update IPv6
  lease from the memory file database for the specified address.

**DHCPSRV_MEMFILE_WIPE_LEASES4**

removing all IPv4 leases from subnet %1

  This informational message is printed when removal of all leases from
  specified IPv4 subnet is commencing. This is a result of receiving administrative
  command.

**DHCPSRV_MEMFILE_WIPE_LEASES4_FINISHED**

removing all IPv4 leases from subnet %1 finished, removed %2 leases

  This informational message is printed when removal of all leases from
  a specified IPv4 subnet has finished. The number of removed leases is
  printed.

**DHCPSRV_MEMFILE_WIPE_LEASES6**

removing all IPv6 leases from subnet %1

  This informational message is printed when removal of all leases from
  specified IPv6 subnet is commencing. This is a result of receiving administrative
  command.

**DHCPSRV_MEMFILE_WIPE_LEASES6_FINISHED**

removing all IPv6 leases from subnet %1 finished, removed %2 leases

  This informational message is printed when removal of all leases from
  a specified IPv6 subnet has finished. The number of removed leases is
  printed.

**DHCPSRV_MULTIPLE_RAW_SOCKETS_PER_IFACE**

current configuration will result in opening multiple broadcast capable sockets on some interfaces and some DHCP messages may be duplicated

  A warning message issued when the current configuration indicates that multiple
  sockets, capable of receiving broadcast traffic, will be opened on some of the
  interfaces. It must be noted that this may lead to receiving and processing
  the same DHCP message multiple times, as it will be received by each socket
  individually.

**DHCPSRV_MYSQL_ADD_ADDR4**

adding IPv4 lease with address %1

  A debug message issued when the server is about to add an IPv4 lease
  with the specified address to the MySQL backend database.

**DHCPSRV_MYSQL_ADD_ADDR6**

adding IPv6 lease with address %1, lease type %2

  A debug message issued when the server is about to add an IPv6 lease
  with the specified address to the MySQL backend database.

**DHCPSRV_MYSQL_BEGIN_TRANSACTION**

committing to MySQL database

  The code has issued a begin transaction call.

**DHCPSRV_MYSQL_COMMIT**

committing to MySQL database

  The code has issued a commit call.  All outstanding transactions will be
  committed to the database.  Note that depending on the MySQL settings,
  the commit may not include a write to disk.

**DHCPSRV_MYSQL_DB**

opening MySQL lease database: %1

  This informational message is logged when a DHCP server (either V4 or
  V6) is about to open a MySQL lease database.  The parameters of the
  connection including database name and username needed to access it
  (but not the password if any) are logged.

**DHCPSRV_MYSQL_DELETED_EXPIRED_RECLAIMED**

deleted %1 reclaimed leases from the database

  A debug message issued when the server has removed a number of reclaimed
  leases from the database. The number of removed leases is included in the
  message.

**DHCPSRV_MYSQL_DELETE_ADDR**

deleting lease for address %1

  A debug message issued when the server is attempting to delete a lease for
  the specified address from the MySQL database for the specified address.

**DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED4**

deleting reclaimed IPv4 leases that expired more than %1 seconds ago

  A debug message issued when the server is removing reclaimed DHCPv4
  leases which have expired longer than a specified period of time.
  The argument is the amount of time Kea waits after a reclaimed
  lease expires before considering its removal.

**DHCPSRV_MYSQL_DELETE_EXPIRED_RECLAIMED6**

deleting reclaimed IPv6 leases that expired more than %1 seconds ago

  A debug message issued when the server is removing reclaimed DHCPv6
  leases which have expired longer than a specified period of time.
  The argument is the amount of time Kea waits after a reclaimed
  lease expires before considering its removal.

**DHCPSRV_MYSQL_FATAL_ERROR**

Unrecoverable MySQL error occurred: %1 for <%2>, reason: %3 (error code: %4).

  An error message indicating that communication with the MySQL database server
  has been lost.  If automatic recovery has been enabled,  then the server will
  attempt to recover the connectivity.  If not the server will exit with a
  non-zero exit code.  The cause of such an error is most likely a network issue
  or the MySQL server has gone down.

**DHCPSRV_MYSQL_GET4**

obtaining all IPv4 leases

  A debug message issued when the server is attempting to obtain all IPv4
  leases from the MySQL database.

**DHCPSRV_MYSQL_GET6**

obtaining all IPv6 leases

  A debug message issued when the server is attempting to obtain all IPv6
  leases from the MySQL database.

**DHCPSRV_MYSQL_GET_ADDR4**

obtaining IPv4 lease for address %1

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the MySQL database for the specified address.

**DHCPSRV_MYSQL_GET_ADDR6**

obtaining IPv6 lease for address %1, lease type %2

  A debug message issued when the server is attempting to obtain an IPv6
  lease from the MySQL database for the specified address.

**DHCPSRV_MYSQL_GET_CLIENTID**

obtaining IPv4 leases for client ID %1

  A debug message issued when the server is attempting to obtain a set
  of IPv4 leases from the MySQL database for a client with the specified
  client identification.

**DHCPSRV_MYSQL_GET_DUID**

obtaining IPv6 lease for duid %1,

  A debug message issued when the server is attempting to obtain an IPv6
  lease from the MySQL database for the specified duid.

**DHCPSRV_MYSQL_GET_EXPIRED4**

obtaining maximum %1 of expired IPv4 leases

  A debug message issued when the server is attempting to obtain expired
  IPv4 leases to reclaim them. The maximum number of leases to be retrieved
  is logged in the message.

**DHCPSRV_MYSQL_GET_EXPIRED6**

obtaining maximum %1 of expired IPv6 leases

  A debug message issued when the server is attempting to obtain expired
  IPv6 leases to reclaim them. The maximum number of leases to be retrieved
  is logged in the message.

**DHCPSRV_MYSQL_GET_HOSTNAME4**

obtaining IPv4 leases for hostname %1

  A debug message issued when the server is attempting to obtain a set
  of IPv4 leases from the MySQL database for a client with the specified
  hostname.

**DHCPSRV_MYSQL_GET_HOSTNAME6**

obtaining IPv6 leases for hostname %1

  A debug message issued when the server is attempting to obtain a set
  of IPv6 leases from the MySQL database for a client with the specified
  hostname.

**DHCPSRV_MYSQL_GET_HWADDR**

obtaining IPv4 leases for hardware address %1

  A debug message issued when the server is attempting to obtain a set
  of IPv4 leases from the MySQL database for a client with the specified
  hardware address.

**DHCPSRV_MYSQL_GET_IAID_DUID**

obtaining IPv6 leases for IAID %1, DUID %2, lease type %3

  A debug message issued when the server is attempting to obtain a set of IPv6
  leases from the MySQL database for a client with the specified IAID (Identity
  Association ID) and DUID (DHCP Unique Identifier).

**DHCPSRV_MYSQL_GET_IAID_SUBID_DUID**

obtaining IPv6 leases for IAID %1, Subnet ID %2, DUID %3, lease type %4

  A debug message issued when the server is attempting to obtain an IPv6
  lease from the MySQL database for a client with the specified IAID
  (Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier).

**DHCPSRV_MYSQL_GET_PAGE4**

obtaining at most %1 IPv4 leases starting from address %2

  A debug message issued when the server is attempting to obtain a page
  of leases beginning with the specified address.

**DHCPSRV_MYSQL_GET_PAGE6**

obtaining at most %1 IPv6 leases starting from address %2

  A debug message issued when the server is attempting to obtain a page
  of leases beginning with the specified address.

**DHCPSRV_MYSQL_GET_SUBID4**

obtaining IPv4 leases for subnet ID %1

  A debug message issued when the server is attempting to obtain all IPv4
  leases for a given subnet identifier from the MySQL database.

**DHCPSRV_MYSQL_GET_SUBID6**

obtaining IPv6 leases for subnet ID %1

  A debug message issued when the server is attempting to obtain all IPv6
  leases for a given subnet identifier from the MySQL database.

**DHCPSRV_MYSQL_GET_SUBID_CLIENTID**

obtaining IPv4 lease for subnet ID %1 and client ID %2

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the MySQL database for a client with the specified subnet ID
  and client ID.

**DHCPSRV_MYSQL_GET_SUBID_HWADDR**

obtaining IPv4 lease for subnet ID %1 and hardware address %2

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the MySQL database for a client with the specified subnet ID
  and hardware address.

**DHCPSRV_MYSQL_GET_VERSION**

obtaining schema version information

  A debug message issued when the server is about to obtain schema version
  information from the MySQL database.

**DHCPSRV_MYSQL_HOST_DB**

opening MySQL hosts database: %1

  This informational message is logged when a DHCP server (either V4 or
  V6) is about to open a MySQL hosts database.  The parameters of the
  connection including database name and username needed to access it
  (but not the password if any) are logged.

**DHCPSRV_MYSQL_HOST_DB_GET_VERSION**

obtaining schema version information for the MySQL hosts database

  A debug message issued when the server is about to obtain schema version
  information from the MySQL hosts database.

**DHCPSRV_MYSQL_HOST_DB_READONLY**

MySQL host database opened for read access only

  This informational message is issued when the user has configured the MySQL
  database in read-only mode. Kea will not be able to insert or modify
  host reservations but will be able to retrieve existing ones and
  assign them to the clients communicating with the server.

**DHCPSRV_MYSQL_HOST_DB_RECONNECT_ATTEMPT_FAILED**

database reconnect failed: %1

  An error message issued when an attempt to reconnect has failed.

**DHCPSRV_MYSQL_HOST_DB_RECONNECT_ATTEMPT_SCHEDULE**

scheduling attempt %1 of %2 in %3 milliseconds

  An info message issued when the server is scheduling the next attempt to reconnect
  to the database.  This occurs when the server has lost database connectivity and
  is attempting to reconnect automatically.

**DHCPSRV_MYSQL_HOST_DB_RECONNECT_FAILED**

maximum number of database reconnect attempts: %1, has been exhausted without success

  An error message issued when the server failed to reconnect.  Loss of connectivity
  is typically a network or database server issue.

**DHCPSRV_MYSQL_LEASE_DB_RECONNECT_ATTEMPT_FAILED**

database reconnect failed: %1

  An error message issued when an attempt to reconnect has failed.

**DHCPSRV_MYSQL_LEASE_DB_RECONNECT_ATTEMPT_SCHEDULE**

scheduling attempt %1 of %2 in %3 milliseconds

  An info message issued when the server is scheduling the next attempt to reconnect
  to the database.  This occurs when the server has lost database connectivity and
  is attempting to reconnect automatically.

**DHCPSRV_MYSQL_LEASE_DB_RECONNECT_FAILED**

maximum number of database reconnect attempts: %1, has been exhausted without success

  An error message issued when the server failed to reconnect.  Loss of connectivity
  is typically a network or database server issue.

**DHCPSRV_MYSQL_NEGATIVE_LEASES_STAT**

recount of leases returned a negative value

  This warning message is issued when the recount of leases using counters
  in the MySQL database returned a negative value. This shows a problem
  which can be fixed only by an offline direct recount on the database.
  This message is issued only once.

**DHCPSRV_MYSQL_NO_TLS**

TLS was required but is not used

  This error message is issued when TLS for the connection was required but
  TLS is not used.

**DHCPSRV_MYSQL_ROLLBACK**

rolling back MySQL database

  The code has issued a rollback call.  All outstanding transaction will
  be rolled back and not committed to the database.

**DHCPSRV_MYSQL_START_TRANSACTION**

starting new MySQL transaction

  A debug message issued when a new MySQL transaction is being started.
  This message is typically not issued when inserting data into a
  single table because the server doesn't explicitly start
  transactions in this case. This message is issued when data is
  inserted into multiple tables with multiple INSERT statements
  and there may be a need to rollback the whole transaction if
  any of these INSERT statements fail.

**DHCPSRV_MYSQL_TLS_CIPHER**

TLS cipher: %1

  A debug message issued when a new MySQL connected is created with TLS.
  The TLS cipher name is logged.

**DHCPSRV_MYSQL_UPDATE_ADDR4**

updating IPv4 lease for address %1

  A debug message issued when the server is attempting to update IPv4
  lease from the MySQL database for the specified address.

**DHCPSRV_MYSQL_UPDATE_ADDR6**

updating IPv6 lease for address %1, lease type %2

  A debug message issued when the server is attempting to update IPv6
  lease from the MySQL database for the specified address.

**DHCPSRV_NOTYPE_DB**

no 'type' keyword to determine database backend: %1

  This is an error message, logged when an attempt has been made to access
  a database backend, but where no 'type' keyword has been included in
  the access string.  The access string (less any passwords) is included
  in the message.

**DHCPSRV_NO_SOCKETS_OPEN**

no interface configured to listen to DHCP traffic

  This warning message is issued when the current server configuration specifies
  no interfaces that the server should listen on, or when the specified interfaces are not
  configured to receive the traffic.

**DHCPSRV_OPEN_SOCKET_FAIL**

failed to open socket: %1

  A warning message issued when IfaceMgr fails to open and bind a socket.
  The reason for the failure is appended as an argument of the log message.

**DHCPSRV_PGSQL_ADD_ADDR4**

adding IPv4 lease with address %1

  A debug message issued when the server is about to add an IPv4 lease
  with the specified address to the PostgreSQL backend database.

**DHCPSRV_PGSQL_ADD_ADDR6**

adding IPv6 lease with address %1, lease type %2

  A debug message issued when the server is about to add an IPv6 lease
  with the specified address to the PostgreSQL backend database.

**DHCPSRV_PGSQL_BEGIN_TRANSACTION**

committing to PostgreSQL database

  The code has issued a begin transaction call.

**DHCPSRV_PGSQL_COMMIT**

committing to PostgreSQL database

  The code has issued a commit call.  All outstanding transactions will be
  committed to the database.  Note that depending on the PostgreSQL settings,
  the commit may not include a write to disk.

**DHCPSRV_PGSQL_DB**

opening PostgreSQL lease database: %1

  This informational message is logged when a DHCP server (either V4 or
  V6) is about to open a PostgreSQL lease database.  The parameters of the
  connection including database name and username needed to access it
  (but not the password if any) are logged.

**DHCPSRV_PGSQL_DEALLOC_ERROR**

An error occurred deallocating SQL statements while closing the PostgreSQL lease database: %1

  This is an error message issued when a DHCP server (either V4 or V6) experienced
  and error freeing database SQL resources as part of closing its connection to
  the PostgreSQL database.  The connection is closed as part of normal server
  shutdown.  This error is most likely a programmatic issue that is highly
  unlikely to occur or negatively impact server operation.

**DHCPSRV_PGSQL_DELETE_ADDR**

deleting lease for address %1

  A debug message issued when the server is attempting to delete a lease for
  the specified address from the PostgreSQL database for the specified address.

**DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED4**

deleting reclaimed IPv4 leases that expired more than %1 seconds ago

  A debug message issued when the server is removing reclaimed DHCPv4
  leases which have expired longer than a specified period of time.
  The argument is the amount of time Kea waits after a reclaimed
  lease expires before considering its removal.

**DHCPSRV_PGSQL_DELETE_EXPIRED_RECLAIMED6**

deleting reclaimed IPv6 leases that expired more than %1 seconds ago

  A debug message issued when the server is removing reclaimed DHCPv6
  leases which have expired longer than a specified period of time.
  The argument is the amount of time Kea waits after a reclaimed
  lease expires before considering its removal.

**DHCPSRV_PGSQL_FATAL_ERROR**

Unrecoverable PostgreSQL error occurred: Statement: <%1>, reason: %2 (error code: %3).

  An error message indicating that communication with the PostgreSQL database server
  has been lost.  If automatic recovery has been enabled,  then the server will
  attempt to recover the connectivity.  If not the server will exit with a
  non-zero exit code.  The cause of such an error is most likely a network issue
  or the PostgreSQL server has gone down.

**DHCPSRV_PGSQL_GET4**

obtaining all IPv4 leases

  A debug message issued when the server is attempting to obtain all IPv4
  leases from the PostgreSQL database.

**DHCPSRV_PGSQL_GET6**

obtaining all IPv6 leases

  A debug message issued when the server is attempting to obtain all IPv6
  leases from the PostgreSQL database.

**DHCPSRV_PGSQL_GET_ADDR4**

obtaining IPv4 lease for address %1

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the PostgreSQL database for the specified address.

**DHCPSRV_PGSQL_GET_ADDR6**

obtaining IPv6 lease for address %1 (lease type %2)

  A debug message issued when the server is attempting to obtain an IPv6
  lease from the PostgreSQL database for the specified address.

**DHCPSRV_PGSQL_GET_CLIENTID**

obtaining IPv4 leases for client ID %1

  A debug message issued when the server is attempting to obtain a set
  of IPv4 leases from the PostgreSQL database for a client with the specified
  client identification.

**DHCPSRV_PGSQL_GET_DUID**

obtaining IPv6 leases for DUID %1,

  A debug message issued when the server is attempting to obtain a set of IPv6
  leases from the PostgreSQL database for a client with the specified DUID (DHCP Unique Identifier).

**DHCPSRV_PGSQL_GET_EXPIRED4**

obtaining maximum %1 of expired IPv4 leases

  A debug message issued when the server is attempting to obtain expired
  IPv4 leases to reclaim them. The maximum number of leases to be retrieved
  is logged in the message.

**DHCPSRV_PGSQL_GET_EXPIRED6**

obtaining maximum %1 of expired IPv6 leases

  A debug message issued when the server is attempting to obtain expired
  IPv6 leases to reclaim them. The maximum number of leases to be retrieved
  is logged in the message.

**DHCPSRV_PGSQL_GET_HOSTNAME4**

obtaining IPv4 leases for hostname %1

  A debug message issued when the server is attempting to obtain a set
  of IPv4 leases from the PostgreSQL database for a client with the specified
  hostname.

**DHCPSRV_PGSQL_GET_HOSTNAME6**

obtaining IPv6 leases for hostname %1

  A debug message issued when the server is attempting to obtain a set
  of IPv6 leases from the PostgreSQL database for a client with the specified
  hostname.

**DHCPSRV_PGSQL_GET_HWADDR**

obtaining IPv4 leases for hardware address %1

  A debug message issued when the server is attempting to obtain a set
  of IPv4 leases from the PostgreSQL database for a client with the specified
  hardware address.

**DHCPSRV_PGSQL_GET_IAID_DUID**

obtaining IPv4 leases for IAID %1 and DUID %2, lease type %3

  A debug message issued when the server is attempting to obtain a set of IPv6
  leases from the PostgreSQL database for a client with the specified IAID
  (Identity Association ID) and DUID (DHCP Unique Identifier).

**DHCPSRV_PGSQL_GET_IAID_SUBID_DUID**

obtaining IPv4 leases for IAID %1, Subnet ID %2, DUID %3, and lease type %4

  A debug message issued when the server is attempting to obtain an IPv6
  lease from the PostgreSQL database for a client with the specified IAID
  (Identity Association ID), Subnet ID and DUID (DHCP Unique Identifier).

**DHCPSRV_PGSQL_GET_PAGE4**

obtaining at most %1 IPv4 leases starting from address %2

  A debug message issued when the server is attempting to obtain a page
  of leases beginning with the specified address.

**DHCPSRV_PGSQL_GET_PAGE6**

obtaining at most %1 IPv6 leases starting from address %2

  A debug message issued when the server is attempting to obtain a page
  of leases beginning with the specified address.

**DHCPSRV_PGSQL_GET_SUBID4**

obtaining IPv4 leases for subnet ID %1

  A debug message issued when the server is attempting to obtain all IPv4
  leases for a given subnet identifier from the PostgreSQL database.

**DHCPSRV_PGSQL_GET_SUBID6**

obtaining IPv6 leases for subnet ID %1

  A debug message issued when the server is attempting to obtain all IPv6
  leases for a given subnet identifier from the PostgreSQL database.

**DHCPSRV_PGSQL_GET_SUBID_CLIENTID**

obtaining IPv4 lease for subnet ID %1 and client ID %2

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the PostgreSQL database for a client with the specified subnet ID
  and client ID.

**DHCPSRV_PGSQL_GET_SUBID_HWADDR**

obtaining IPv4 lease for subnet ID %1 and hardware address %2

  A debug message issued when the server is attempting to obtain an IPv4
  lease from the PostgreSQL database for a client with the specified subnet ID
  and hardware address.

**DHCPSRV_PGSQL_GET_VERSION**

obtaining schema version information

  A debug message issued when the server is about to obtain schema version
  information from the PostgreSQL database.

**DHCPSRV_PGSQL_HOST_DB**

opening PostgreSQL hosts database: %1

  This informational message is logged when a DHCP server (either V4 or
  V6) is about to open a PostgreSQL hosts database.  The parameters of the
  connection including database name and username needed to access it
  (but not the password if any) are logged.

**DHCPSRV_PGSQL_HOST_DB_GET_VERSION**

obtaining schema version information for the PostgreSQL hosts database

  A debug message issued when the server is about to obtain schema version
  information from the PostgreSQL hosts database.

**DHCPSRV_PGSQL_HOST_DB_READONLY**

PostgreSQL host database opened for read access only

  This informational message is issued when the user has configured the PostgreSQL
  database in read-only mode. Kea will not be able to insert or modify
  host reservations but will be able to retrieve existing ones and
  assign them to the clients communicating with the server.

**DHCPSRV_PGSQL_HOST_DB_RECONNECT_ATTEMPT_FAILED**

database reconnect failed: %1

  An error message issued when an attempt to reconnect has failed.

**DHCPSRV_PGSQL_HOST_DB_RECONNECT_ATTEMPT_SCHEDULE**

scheduling attempt %1 of %2 in %3 milliseconds

  An info message issued when the server is scheduling the next attempt to reconnect
  to the database.  This occurs when the server has lost database connectivity and
  is attempting to reconnect automatically.

**DHCPSRV_PGSQL_HOST_DB_RECONNECT_FAILED**

maximum number of database reconnect attempts: %1, has been exhausted without success

  An error message issued when the server failed to reconnect.  Loss of connectivity
  is typically a network or database server issue.

**DHCPSRV_PGSQL_LEASE_DB_RECONNECT_ATTEMPT_FAILED**

database reconnect failed: %1

  An error message issued when an attempt to reconnect has failed.

**DHCPSRV_PGSQL_LEASE_DB_RECONNECT_ATTEMPT_SCHEDULE**

scheduling attempt %1 of %2 in %3 milliseconds

  An info message issued when the server is scheduling the next attempt to reconnect
  to the database.  This occurs when the server has lost database connectivity and
  is attempting to reconnect automatically.

**DHCPSRV_PGSQL_LEASE_DB_RECONNECT_FAILED**

maximum number of database reconnect attempts: %1, has been exhausted without success

  An error message issued when the server failed to reconnect.  Loss of connectivity
  is typically a network or database server issue.

**DHCPSRV_PGSQL_NEGATIVE_LEASES_STAT**

recount of leases returned a negative value

  This warning message is issued when the recount of leases using counters
  in the PostgreSQL database returned a negative value. This shows a problem
  which can be fixed only by an offline direct recount on the database.
  This message is issued only once.

**DHCPSRV_PGSQL_NO_TLS_SUPPORT**

Attempt to configure TLS (unsupported for PostgreSQL): %1

  This error message is printed when TLS support was required in the Kea
  configuration: Kea was built with this feature disabled for PostgreSQL.
  The parameters of the connection are logged.

**DHCPSRV_PGSQL_ROLLBACK**

rolling back PostgreSQL database

  The code has issued a rollback call.  All outstanding transaction will
  be rolled back and not committed to the database.

**DHCPSRV_PGSQL_START_TRANSACTION**

starting a new PostgreSQL transaction

  A debug message issued when a new PostgreSQL transaction is being started.
  This message is typically not issued when inserting data into a
  single table because the server doesn't explicitly start
  transactions in this case. This message is issued when data is
  inserted into multiple tables with multiple INSERT statements
  and there may be a need to rollback the whole transaction if
  any of these INSERT statements fail.

**DHCPSRV_PGSQL_TLS_SUPPORT**

Attempt to configure TLS: %1

  This informational message is printed when TLS support was required in
  the Kea configuration: The TLS support in PostgreSQL will be initialized but
  its configuration is fully managed outside the C API.
  The parameters of the connection are logged.

**DHCPSRV_PGSQL_UPDATE_ADDR4**

updating IPv4 lease for address %1

  A debug message issued when the server is attempting to update IPv4
  lease from the PostgreSQL database for the specified address.

**DHCPSRV_PGSQL_UPDATE_ADDR6**

updating IPv6 lease for address %1, lease type %2

  A debug message issued when the server is attempting to update IPv6
  lease from the PostgreSQL database for the specified address.

**DHCPSRV_QUEUE_NCR**

%1: Name change request to %2 DNS entry queued: %3

  A debug message which is logged when the NameChangeRequest to add or remove
  a DNS entries for a particular lease has been queued. The first argument
  includes the client identification information. The second argument
  indicates whether the DNS entry is to be added or removed. The third
  argument carries the details of the NameChangeRequest.

**DHCPSRV_QUEUE_NCR_FAILED**

%1: queuing %2 name change request failed for lease %3: %4

  This error message is logged when sending a NameChangeRequest
  to DHCP DDNS failed. The first argument includes the client identification
  information. The second argument indicates whether the DNS entry is to be
  added or removed. The third argument specifies the leased address. The
  last argument provides the reason for failure.

**DHCPSRV_QUEUE_NCR_SKIP**

%1: skip queuing name change request for lease: %2

  This debug message is issued when the server decides to not queue the name
  change request because the lease doesn't include the FQDN, the forward and
  reverse update is disabled for this lease or the DNS updates are disabled
  in the configuration. The first argument includes the client identification
  information. The second argument includes the leased address.

**DHCPSRV_SUBNET4O6_SELECT_FAILED**

Failed to select any subnet for the DHCPv4o6 packet

  A debug message issued when the server was unable to select any subnet for the
  DHCPv4o6 packet.

**DHCPSRV_SUBNET4_SELECT_BY_ADDRESS_NO_MATCH**

No subnet matches address: %1

  A debug message issued when the server was unable to select a subnet using
  the specified address.

**DHCPSRV_SUBNET4_SELECT_BY_INTERFACE_NO_MATCH**

No subnet matches interface: %1

  A debug message issued when the server was unable to select a subnet using
  the specified interface name.

**DHCPSRV_SUBNET4_SELECT_BY_RELAY_ADDRESS_NO_MATCH**

No subnet matches relay address: %1

  A debug message issued when the server was unable to select a subnet using
  the specified relay address.

**DHCPSRV_SUBNET4_SELECT_NO_RAI_OPTIONS**

No RAI options found to use for subnet selection.

  A debug message issued by the server when the client query does not include RAI
  options suitable for use with subnet selection.

**DHCPSRV_SUBNET4_SELECT_NO_RELAY_ADDRESS**

Relay address (giaddr) in client packet is empty.

  A debug message issued when no relay address was specified to use for subnet
  selection.

**DHCPSRV_SUBNET4_SELECT_NO_USABLE_ADDRESS**

No subnet selected because no suitable address to use for subnet selection was found.

  A debug message issued when the server was find a suitable address to use for
  subnet selection.

**DHCPSRV_SUBNET6_SELECT_BY_ADDRESS_NO_MATCH**

No subnet matches address: %1

  A debug message issued when the server was unable to select a subnet using
  the specified address.

**DHCPSRV_SUBNET6_SELECT_BY_INTERFACE_ID_NO_MATCH**

No subnet matches interface id: %1

  A debug message issued when the server was unable to select a subnet using
  the specified interface id.

**DHCPSRV_SUBNET6_SELECT_BY_INTERFACE_NO_MATCH**

No subnet matches interface: %1

  A debug message issued when the server was unable to select a subnet using
  the specified interface name.

**DHCPSRV_TIMERMGR_CALLBACK_FAILED**

running handler for timer %1 caused exception: %2

  This error message is emitted when the timer elapsed and the
  operation associated with this timer has thrown an exception.
  The timer name and the reason for exception is logged.

**DHCPSRV_TIMERMGR_REGISTER_TIMER**

registering timer: %1, using interval: %2 ms

  A debug message issued when the new interval timer is registered in
  the Timer Manager. This timer will have a callback function
  associated with it, and this function will be executed according
  to the interval specified. The unique name of the timer and the
  interval at which the callback function will be executed is
  included in the message.

**DHCPSRV_TIMERMGR_RUN_TIMER_OPERATION**

running operation for timer: %1

  A debug message issued when the Timer Manager is about to
  run a periodic operation associated with the given timer.
  An example of such operation is a periodic cleanup of
  expired leases. The name of the timer is included in the
  message.

**DHCPSRV_TIMERMGR_START_TIMER**

starting timer: %1

  A debug message issued when the registered interval timer is
  being started. If this operation is successful the timer will
  periodically execute the operation associated with it. The
  name of the started timer is included in the message.

**DHCPSRV_TIMERMGR_STOP_TIMER**

stopping timer: %1

  A debug message issued when the registered interval timer is
  being stopped. The timer remains registered and can be restarted
  if necessary. The name of the timer is included in the message.

**DHCPSRV_TIMERMGR_UNREGISTER_ALL_TIMERS**

unregistering all timers

  A debug message issued when all registered interval timers are
  being unregistered from the Timer Manager.

**DHCPSRV_TIMERMGR_UNREGISTER_TIMER**

unregistering timer: %1

  A debug message issued when one of the registered interval timers
  is unregistered from the Timer Manager. The name of the timer is
  included in the message.

**DHCPSRV_UNEXPECTED_NAME**

database access parameters passed through '%1', expected 'lease-database'

  The parameters for access the lease database were passed to the server through
  the named configuration parameter, but the code was expecting them to be
  passed via the parameter named "lease-database".  If the database opens
  successfully, there is no impact on server operation.  However, as this does
  indicate an error in the source code, please submit a bug report.

DHCP
~~~~

**DHCP_DDNS_ADD_FAILED**

DHCP_DDNS Request ID %1: Transaction outcome %2

  This is an error message issued after DHCP_DDNS attempts to submit DNS mapping
  entry additions have failed.  The precise reason for the failure should be
  documented in preceding log entries.

**DHCP_DDNS_ADD_SUCCEEDED**

DHCP_DDNS Request ID %1: successfully added the DNS mapping addition for this request: %2

  This is an informational message issued after DHCP_DDNS has submitted DNS
  mapping additions which were received and accepted by an appropriate DNS server.

**DHCP_DDNS_ALREADY_RUNNING**

%1 already running? %2

  This is an error message that occurs when DHCP_DDNS encounters a pre-existing
  PID file which contains the PID of a running process.  This most likely
  indicates an attempt to start a second instance of DHCP_DDNS using the
  same configuration file.  It is possible, though unlikely, that the PID file
  is a remnant left behind by a server crash or power failure and the PID
  it contains refers to a process other than DHCP_DDNS.  In such an event,
  it would be necessary to manually remove the PID file.  The first argument is
  the DHCP_DDNS process name, the second contains the PID and PID file.

**DHCP_DDNS_AT_MAX_TRANSACTIONS**

application has %1 queued requests but has reached maximum number of %2 concurrent transactions

  This is a debug message that indicates that the application has DHCP_DDNS
  requests in the queue but is working as many concurrent requests as allowed.

**DHCP_DDNS_CLEARED_FOR_SHUTDOWN**

application has met shutdown criteria for shutdown type: %1

  This is a debug message issued when the application has been instructed
  to shutdown and has met the required criteria to exit.

**DHCP_DDNS_COMMAND**

command directive received, command: %1 - args: %2

  This is a debug message issued when the DHCP-DDNS application command method
  has been invoked.

**DHCP_DDNS_CONFIGURE**

configuration %1 received: %2

  This is a debug message issued when the DHCP-DDNS application configure method
  has been invoked.

**DHCP_DDNS_CONFIGURED_CALLOUT_DROP**

configuration was rejected because a callout set the next step to 'drop': %1

  This error message indicates that the DHCP-DDNS had failed configuration
  attempt because the next step of the configured callout was set to 'drop'
  by a hook library. The error message provided by the hook library is displayed.

**DHCP_DDNS_CONFIG_CHECK_FAIL**

DHCP-DDNS server configuration check failed: %1

  This error message indicates that the DHCP-DDNS had failed configuration
  check. Details are provided. Additional details may be available
  in earlier log entries, possibly on lower levels.

**DHCP_DDNS_CONFIG_FAIL**

DHCP-DDNS server configuration failed: %1

  This error message indicates that the DHCP-DDNS had failed configuration
  attempt. Details are provided. Additional details may be available
  in earlier log entries, possibly on lower levels.

**DHCP_DDNS_CONFIG_SYNTAX_WARNING**

DHCP-DDNS server configuration syntax warning: %1

  This warning message indicates that the DHCP-DDNS configuration had a minor
  syntax error. The error was displayed and the configuration parsing resumed.

**DHCP_DDNS_FAILED**

application experienced a fatal error: %1

  This is a debug message issued when the DHCP-DDNS application encounters an
  unrecoverable error from within the event loop.

**DHCP_DDNS_FORWARD_ADD_BAD_DNSCLIENT_STATUS**

DHCP_DDNS Request ID %1: received an unknown DNSClient status: %2, while adding a forward address mapping for FQDN %3 to DNS server %4

  This is an error message issued when DNSClient returns an unrecognized status
  while DHCP_DDNS was adding a forward address mapping.  The request will be
  aborted.  This is most likely a programmatic issue and should be reported.

**DHCP_DDNS_FORWARD_ADD_BUILD_FAILURE**

DNS Request ID %1:  update message to add a forward DNS entry could not be constructed for this request: %2, reason: %3

  This is an error message issued when an error occurs attempting to construct
  the server bound packet requesting a forward address addition.  This is due
  to invalid data contained in the NameChangeRequest. The request will be aborted.
  This is most likely a configuration issue.

**DHCP_DDNS_FORWARD_ADD_IO_ERROR**

DHCP_DDNS Request ID %1: encountered an IO error sending a forward mapping add for FQDN %2 to DNS server %3

  This is an error message issued when a communication error occurs while
  DHCP_DDNS is carrying out a forward address update.  The application will
  retry against the same server or others as appropriate.

**DHCP_DDNS_FORWARD_ADD_REJECTED**

DNS Request ID %1: Server, %2, rejected a DNS update request to add the address mapping for FQDN, %3, with an RCODE: %4

  This is an error message issued when an update was rejected by the DNS server
  it was sent to for the reason given by the RCODE. The rcode values are defined
  in RFC 2136.

**DHCP_DDNS_FORWARD_ADD_RESP_CORRUPT**

DHCP_DDNS Request ID %1: received a corrupt response from the DNS server, %2, while adding forward address mapping for FQDN, %3

  This is an error message issued when the response received by DHCP_DDNS, to a
  update request to add a forward address mapping,  is mangled or malformed.
  The application will retry against the same server or others as appropriate.

**DHCP_DDNS_FORWARD_REMOVE_ADDRS_BAD_DNSCLIENT_STATUS**

DHCP_DDNS Request ID %1: received an unknown DNSClient status: %2, while removing a forward address mapping for FQDN %3 to DNS server %4

  This is an error message issued when DNSClient returns an unrecognized status
  while DHCP_DDNS was removing a forward address mapping.  The request will be
  aborted.  This is most likely a programmatic issue and should be reported.

**DHCP_DDNS_FORWARD_REMOVE_ADDRS_BUILD_FAILURE**

DNS Request ID %1: update message to remove a forward DNS Address entry could not be constructed for this request: %2, reason: %3

  This is an error message issued when an error occurs attempting to construct
  the server bound packet requesting a forward address (A or AAAA) removal.  This
  is due to invalid data contained in the NameChangeRequest. The request will be
  aborted.  This is most likely a configuration issue.
  /*sar*/

**DHCP_DDNS_FORWARD_REMOVE_ADDRS_IO_ERROR**

DHCP_DDNS Request ID %1: encountered an IO error sending a forward mapping address removal for FQDN %2 to DNS server %3

  This is an error message issued when a communication error occurs while
  DHCP_DDNS is carrying out a forward address remove.  The application will retry
  against the same server or others as appropriate.

**DHCP_DDNS_FORWARD_REMOVE_ADDRS_REJECTED**

DNS Request ID %1: Server, %2, rejected a DNS update request to remove the forward address mapping for FQDN, %3, with an RCODE: %4

  This is an error message issued when an update was rejected by the DNS server
  it was sent to for the reason given by the RCODE. The rcode values are defined
  in RFC 2136.

**DHCP_DDNS_FORWARD_REMOVE_ADDRS_RESP_CORRUPT**

DHCP_DDNS Request ID %1: received a corrupt response from the DNS server, %2, while removing forward address mapping for FQDN, %3

  This is an error message issued when the response received by DHCP_DDNS, to a
  update request to remove a forward address mapping, is mangled or malformed.
  The application will retry against the same server or others as appropriate.

**DHCP_DDNS_FORWARD_REMOVE_RRS_BAD_DNSCLIENT_STATUS**

DHCP_DDNS Request ID %1: received an unknown DNSClient status: %2, while removing forward RRs for FQDN %3 to DNS server %4

  This is an error message issued when DNSClient returns an unrecognized status
  while DHCP_DDNS was removing forward RRs.  The request will be aborted. This is
  most likely a programmatic issue and should be reported.

**DHCP_DDNS_FORWARD_REMOVE_RRS_BUILD_FAILURE**

DNS Request ID %1: update message to remove forward DNS RR entries could not be constructed for this request: %2,  reason: %3

  This is an error message issued when an error occurs attempting to construct
  the server bound packet requesting forward RR (DHCID RR) removal.  This is due
  to invalid data contained in the NameChangeRequest. The request will be aborted.
  This is most likely a configuration issue.

**DHCP_DDNS_FORWARD_REMOVE_RRS_IO_ERROR**

DHCP_DDNS Request ID %1: encountered an IO error sending a forward RR removal for FQDN %2 to DNS server %3

  This is an error message issued when a communication error occurs while
  DHCP_DDNS is carrying out a forward RR remove.  The application will retry
  against the same server.

**DHCP_DDNS_FORWARD_REMOVE_RRS_REJECTED**

DNS Request ID %1: Server, %2, rejected a DNS update request to remove forward RR entries for FQDN, %3, with an RCODE: %4

  This is an error message issued when an update was rejected by the DNS server
  it was sent to for the reason given by the RCODE. The rcode values are defined
  in RFC 2136.

**DHCP_DDNS_FORWARD_REMOVE_RRS_RESP_CORRUPT**

DHCP_DDNS Request ID %1: received a corrupt response from the DNS server, %2, while removing forward RRs for FQDN, %3

  This is an error message issued when the response received by DHCP_DDNS, to a
  update request to remove forward RRs mapping, is mangled or malformed.
  The application will retry against the same server or others as appropriate.
  /*sar*/

**DHCP_DDNS_FORWARD_REPLACE_BAD_DNSCLIENT_STATUS**

DHCP_DDNS Request ID %1: received an unknown DNSClient status: %2, while replacing forward address mapping for FQDN %3 to DNS server %4

  This is an error message issued when DNSClient returns an unrecognized status
  while DHCP_DDNS was replacing a forward address mapping.  The request will be
  aborted.  This is most likely a programmatic issue and should be reported.

**DHCP_DDNS_FORWARD_REPLACE_BUILD_FAILURE**

DNS Request ID %1: update message to replace a forward DNS entry could not be constructed from this request: %2, reason: %3

  This is an error message issued when an error occurs attempting to construct
  the server bound packet requesting a forward address replacement.  This is
  due to invalid data contained in the NameChangeRequest. The request will be
  aborted.  This is most likely a configuration issue.

**DHCP_DDNS_FORWARD_REPLACE_IO_ERROR**

DHCP_DDNS Request ID %1: encountered an IO error sending a forward mapping replace for FQDN %2 to DNS server %3

  This is an error message issued when a communication error occurs while
  DHCP_DDNS is carrying out a forward address update.  The application will
  retry against the same server or others as appropriate.

**DHCP_DDNS_FORWARD_REPLACE_REJECTED**

DNS Request ID %1: Server, %2, rejected a DNS update request to replace the address mapping for FQDN, %3, with an RCODE: %4

  This is an error message issued when an update was rejected by the DNS server
  it was sent to for the reason given by the RCODE. The rcode values are defined
  in RFC 2136.

**DHCP_DDNS_FORWARD_REPLACE_RESP_CORRUPT**

DHCP_DDNS Request ID %1: received a corrupt response from the DNS server, %2, while replacing forward address mapping for FQDN, %3

  This is an error message issued when the response received by DHCP_DDNS, to a
  update request to replace a forward address mapping,  is mangled or malformed.
  The application will retry against the same server or others as appropriate.

**DHCP_DDNS_FWD_REQUEST_IGNORED**

Request ID %1: Forward updates are disabled, the forward portion of request will be ignored: %2

  This is a debug message issued when forward DNS updates are disabled and
  DHCP_DDNS receives an update request containing a forward DNS update. The
  forward update will not performed.

**DHCP_DDNS_INVALID_NCR**

application received an invalid DNS update request: %1

  This is an error message that indicates that an invalid request to update
  a DNS entry was received by the application.  Either the format or the content
  of the request is incorrect. The request will be ignored.

**DHCP_DDNS_INVALID_RESPONSE**

received response to DNS Update message is malformed: %1

  This is a debug message issued when the DHCP-DDNS application encountered an
  error while decoding a response to DNS Update message. Typically, this error
  will be encountered when a response message is malformed.

**DHCP_DDNS_NCR_FLUSH_IO_ERROR**

DHCP-DDNS Last send before stopping did not complete successfully: %1

  This is an error message that indicates the DHCP-DDNS client was unable to
  complete the last send prior to exiting send mode.  This is a programmatic
  error, highly unlikely to occur, and should not impair the application's ability
  to process requests.

**DHCP_DDNS_NCR_LISTEN_CLOSE_ERROR**

application encountered an error while closing the listener used to receive NameChangeRequests : %1

  This is an error message that indicates the application was unable to close the
  listener connection used to receive NameChangeRequests.  Closure may occur
  during the course of error recovery or during normal shutdown procedure.  In
  either case the error is unlikely to impair the application's ability to
  process requests but it should be reported for analysis.

**DHCP_DDNS_NCR_RECV_NEXT_ERROR**

application could not initiate the next read following a request receive.

  This is an error message indicating that NameChangeRequest listener could not
  start another read after receiving a request.  While possible, this is highly
  unlikely and is probably a programmatic error.  The application should recover
  on its own.

**DHCP_DDNS_NCR_SEND_CLOSE_ERROR**

DHCP-DDNS client encountered an error while closing the sender connection used to send NameChangeRequests: %1

  This is an error message that indicates the DHCP-DDNS client was unable to
  close the connection used to send NameChangeRequests.  Closure may occur during
  the course of error recovery or during normal shutdown procedure.  In either
  case the error is unlikely to impair the client's ability to send requests but
  it should be reported for analysis.

**DHCP_DDNS_NCR_SEND_NEXT_ERROR**

DHCP-DDNS client could not initiate the next request send following send completion: %1

  This is an error message indicating that NameChangeRequest sender could not
  start another send after completing the send of the previous request.  While
  possible, this is highly unlikely and is probably a programmatic error.  The
  application should recover on its own.

**DHCP_DDNS_NCR_UDP_CLEAR_READY_ERROR**

NCR UDP watch socket failed to clear: %1

  This is an error message that indicates the application was unable to reset the
  UDP NCR sender ready status after completing a send.  This is programmatic error
  that should be reported.  The application may or may not continue to operate
  correctly.

**DHCP_DDNS_NCR_UDP_RECV_CANCELED**

UDP socket receive was canceled while listening for DNS Update requests

  This is a debug  message indicating that the listening on a UDP socket
  for DNS update requests has been canceled.  This is a normal part of
  suspending listening operations.

**DHCP_DDNS_NCR_UDP_RECV_ERROR**

UDP socket receive error while listening for DNS Update requests: %1

  This is an error message indicating that an I/O error occurred while listening
  over a UDP socket for DNS update requests. This could indicate a network
  connectivity or system resource issue.

**DHCP_DDNS_NCR_UDP_SEND_CANCELED**

UDP socket send was canceled while sending a DNS Update request to DHCP_DDNS: %1

  This is an informational message indicating that sending requests via UDP
  socket to DHCP_DDNS has been interrupted. This is a normal part of suspending
  send operations.

**DHCP_DDNS_NCR_UDP_SEND_ERROR**

UDP socket send error while sending a DNS Update request: %1

  This is an error message indicating that an IO error occurred while sending a
  DNS update request to DHCP_DDNS over a UDP socket.  This could indicate a
  network connectivity or system resource issue.

**DHCP_DDNS_NOT_ON_LOOPBACK**

the DHCP-DDNS server has been configured to listen on %1 which is not the local loopback.  This is an insecure configuration supported for testing purposes only

  This is a warning message issued when the DHCP-DDNS server is configured to
  listen at an address other than the loopback address (127.0.0.1 or ::1). It is
  possible for a malicious attacker to send bogus NameChangeRequests to it and
  change entries in the DNS. For this reason, addresses other than the IPv4 or
  IPv6 loopback addresses should only be used for testing purposes. A future
  version of Kea will implement authentication to guard against such attacks.

**DHCP_DDNS_NO_ELIGIBLE_JOBS**

although there are queued requests, there are pending transactions for each, Queue count: %1  Transaction count: %2

  This is a debug message issued when all of the queued requests represent clients
  for which there is an update already in progress.  This may occur under
  normal operations but should be temporary situation.

**DHCP_DDNS_NO_FWD_MATCH_ERROR**

Request ID %1: the configured list of forward DDNS domains does not contain a match for: %2  The request has been discarded.

  This is an error message that indicates that DHCP_DDNS received a request to
  update the forward DNS information for the given FQDN but for which there are
  no configured DDNS domains in the DHCP_DDNS configuration.  Either the DHCP_DDNS
  configuration needs to be updated or the source of the FQDN itself should be
  investigated.

**DHCP_DDNS_NO_MATCH**

No DNS servers match FQDN %1

  This is warning message issued when there are no domains in the configuration
  which match the cited fully qualified domain name (FQDN).  The DNS Update
  request for the FQDN cannot be processed.

**DHCP_DDNS_NO_REV_MATCH_ERROR**

Request ID %1: the configured list of reverse DDNS domains does not contain a match for: %2  The request has been discarded.

  This is an error message that indicates that DHCP_DDNS received a request to
  update the reverse DNS information for the given FQDN but for which there are
  no configured DDNS domains in the DHCP_DDNS configuration.  Either the DHCP_DDNS
  configuration needs to be updated or the source of the FQDN itself should be
  investigated.

**DHCP_DDNS_PROCESS_INIT**

application init invoked

  This is a debug message issued when the DHCP-DDNS application enters
  its initialization method.

**DHCP_DDNS_QUEUE_MGR_QUEUE_FULL**

application request queue has reached maximum number of entries %1

  This an error message indicating that DHCP-DDNS is receiving DNS update
  requests faster than they can be processed.  This may mean the maximum queue
  needs to be increased, the DHCP-DDNS clients are simply generating too many
  requests too quickly, or perhaps upstream DNS servers are experiencing
  load issues.

**DHCP_DDNS_QUEUE_MGR_QUEUE_RECEIVE**

Request ID %1: received and queued a request.

  This is an informational message indicating that the NameChangeRequest listener used
  by DHCP-DDNS to receive a request has received a request and queued it for further
  processing.

**DHCP_DDNS_QUEUE_MGR_RECONFIGURING**

application is reconfiguring the queue manager

  This is an informational message indicating that DHCP_DDNS is reconfiguring the queue manager as part of normal startup or in response to a new configuration.

**DHCP_DDNS_QUEUE_MGR_RECOVERING**

application is attempting to recover from a queue manager IO error

  This is an informational message indicating that DHCP_DDNS is attempting to
  restart the queue manager after it suffered an IO error while receiving
  requests.

**DHCP_DDNS_QUEUE_MGR_RECV_ERROR**

application's queue manager was notified of a request receive error by its listener.

  This is an error message indicating that the NameChangeRequest listener used by
  DHCP-DDNS to receive requests encountered an IO error.  There should be
  corresponding log messages from the listener layer with more details. This may
  indicate a network connectivity or system resource issue.

**DHCP_DDNS_QUEUE_MGR_RESUME_ERROR**

application could not restart the queue manager, reason: %1

  This is an error message indicating that DHCP_DDNS's Queue Manager could not
  be restarted after stopping due to a full receive queue.  This means that
  the application cannot receive requests. This is most likely due to DHCP_DDNS
  configuration parameters referring to resources such as an IP address or port,
  that is no longer unavailable.  DHCP_DDNS will attempt to restart the queue
  manager if given a new configuration.

**DHCP_DDNS_QUEUE_MGR_RESUMING**

application is resuming listening for requests now that the request queue size has reached %1 of a maximum %2 allowed

  This is an informational message indicating that DHCP_DDNS, which had stopped
  accepting new requests, has processed enough entries from the receive queue to
  resume accepting requests.

**DHCP_DDNS_QUEUE_MGR_STARTED**

application's queue manager has begun listening for requests.

  This is a debug message indicating that DHCP_DDNS's Queue Manager has
  successfully started and is now listening for NameChangeRequests.

**DHCP_DDNS_QUEUE_MGR_START_ERROR**

application could not start the queue manager, reason: %1

  This is an error message indicating that DHCP_DDNS's Queue Manager could not
  be started.  This means that the application cannot receive requests. This is
  most likely due to DHCP_DDNS configuration parameters referring to resources
  such as an IP address or port, that are unavailable.  DHCP_DDNS will attempt to
  restart the queue manager if given a new configuration.

**DHCP_DDNS_QUEUE_MGR_STOPPED**

application's queue manager has stopped listening for requests.

  This is a debug message indicating that DHCP_DDNS's Queue Manager has
  stopped listening for NameChangeRequests.  This may be because of normal event
  such as reconfiguration or as a result of an error.  There should be log
  messages preceding this one to indicate why it has stopped.

**DHCP_DDNS_QUEUE_MGR_STOPPING**

application is stopping the queue manager for %1

  This is an informational message indicating that DHCP_DDNS is stopping the
  queue manager either to reconfigure it or as part of application shutdown.

**DHCP_DDNS_QUEUE_MGR_STOP_ERROR**

application encountered an error stopping the queue manager: %1

  This is an error message indicating that DHCP_DDNS encountered an error while
  trying to stop the queue manager.  This error is unlikely to occur or to
  impair the application's ability to function but it should be reported for
  analysis.

**DHCP_DDNS_QUEUE_MGR_UNEXPECTED_HANDLER_ERROR**

application's queue manager request receive handler experienced an unexpected exception %1:

  This is an error message indicating that an unexpected error occurred within the
  DHCP_DDNS's Queue Manager request receive completion handler. This is most
  likely a programmatic issue that should be reported.  The application may
  recover on its own.

**DHCP_DDNS_QUEUE_MGR_UNEXPECTED_STOP**

application's queue manager receive was

  aborted unexpectedly while queue manager state is: %1
  This is an error message indicating that DHCP_DDNS's Queue Manager request
  receive was unexpected interrupted.  Normally, the read is receive is only
  interrupted as a normal part of stopping the queue manager.  This is most
  likely a programmatic issue that should be reported.

**DHCP_DDNS_REMOVE_FAILED**

DHCP_DDNS Request ID %1: Transaction outcome: %2

  This is an error message issued after DHCP_DDNS attempts to submit DNS mapping
  entry removals have failed.  The precise reason for the failure should be
  documented in preceding log entries.

**DHCP_DDNS_REMOVE_SUCCEEDED**

DHCP_DDNS Request ID %1: successfully removed the DNS mapping addition for this request: %2

  This is an informational message issued after DHCP_DDNS has submitted DNS
  mapping removals which were received and accepted by an appropriate DNS server.

**DHCP_DDNS_REQUEST_DROPPED**

Request ID %1: Request contains no enabled update requests and will be dropped: %2

  This is a debug message issued when DHCP_DDNS receives a request which does not
  contain updates in a direction that is enabled.  In other words, if only forward
  updates are enabled and request is received that asks only for reverse updates
  then the request is dropped.

**DHCP_DDNS_REVERSE_REMOVE_BAD_DNSCLIENT_STATUS**

DHCP_DDNS Request ID %1: received an unknown DNSClient status: %2, while removing reverse address mapping for FQDN %3 to DNS server %4

  This is an error message issued when DNSClient returns an unrecognized status
  while DHCP_DDNS was removing a reverse address mapping.  The request will be
  aborted.  This is most likely a programmatic issue and should be reported.

**DHCP_DDNS_REVERSE_REMOVE_BUILD_FAILURE**

DNS Request ID %1: update message to remove a reverse DNS entry could not be constructed from this request: %2,  reason: %3

  This is an error message issued when an error occurs attempting to construct
  the server bound packet requesting a reverse PTR removal.  This is
  due to invalid data contained in the NameChangeRequest. The request will be
  aborted.  This is most likely a configuration issue.

**DHCP_DDNS_REVERSE_REMOVE_IO_ERROR**

DHCP_DDNS Request ID %1: encountered an IO error sending a reverse mapping remove for FQDN %2 to DNS server %3

  This is an error message issued when a communication error occurs while
  DHCP_DDNS is carrying out a reverse address update.  The application will
  retry against the same server or others as appropriate.

**DHCP_DDNS_REVERSE_REMOVE_REJECTED**

DNS Request ID %1: Server, %2, rejected a DNS update request to remove the reverse mapping for FQDN, %3, with an RCODE: %4

  This is an error message issued when an update was rejected by the DNS server
  it was sent to for the reason given by the RCODE. The rcode values are defined
  in RFC 2136.

**DHCP_DDNS_REVERSE_REMOVE_RESP_CORRUPT**

DHCP_DDNS Request ID %1: received a corrupt response from the DNS server, %2, while removing reverse address mapping for FQDN, %3

  This is an error message issued when the response received by DHCP_DDNS, to a
  update request to remove a reverse address,  is mangled or malformed.
  The application will retry against the same server or others as appropriate.

**DHCP_DDNS_REVERSE_REPLACE_BAD_DNSCLIENT_STATUS**

DHCP_DDNS Request ID %1: received an unknown DNSClient status: %2, while replacing reverse address mapping for FQDN %3 to DNS server %4

  This is an error message issued when DNSClient returns an unrecognized status
  while DHCP_DDNS was replacing a reverse address mapping.  The request will be
  aborted.  This is most likely a programmatic issue and should be reported.

**DHCP_DDNS_REVERSE_REPLACE_BUILD_FAILURE**

DNS Request ID %1: update message to replace a reverse DNS entry could not be constructed from this request: %2, reason: %3

  This is an error message issued when an error occurs attempting to construct
  the server bound packet requesting a reverse PTR replacement.  This is
  due to invalid data contained in the NameChangeRequest. The request will be
  aborted.  This is most likely a configuration issue.

**DHCP_DDNS_REVERSE_REPLACE_IO_ERROR**

DHCP_DDNS Request ID %1: encountered an IO error sending a reverse mapping replacement for FQDN %2 to DNS server %3

  This is an error message issued when a communication error occurs while
  DHCP_DDNS is carrying out a reverse address update.  The application will
  retry against the same server or others as appropriate.

**DHCP_DDNS_REVERSE_REPLACE_REJECTED**

DNS Request ID %1: Server, %2, rejected a DNS update request to replace the reverse mapping for FQDN, %3, with an RCODE: %4

  This is an error message issued when an update was rejected by the DNS server
  it was sent to for the reason given by the RCODE. The rcode values are defined
  in RFC 2136.

**DHCP_DDNS_REVERSE_REPLACE_RESP_CORRUPT**

DHCP_DDNS Request ID %1: received a corrupt response from the DNS server, %2, while replacing reverse address mapping for FQDN, %3

  This is an error message issued when the response received by DHCP_DDNS, to a
  update request to replace a reverse address,  is mangled or malformed.
  The application will retry against the same server or others as appropriate.

**DHCP_DDNS_REV_REQUEST_IGNORED**

Request ID %1: Reverse updates are disabled, the reverse portion of request will be ignored: %2

  This is a debug message issued when reverse DNS updates are disabled and
  DHCP_DDNS receives an update request containing a reverse DNS update.  The
  reverse update will not performed.

**DHCP_DDNS_RUN_EXIT**

application is exiting the event loop

  This is a debug message issued when the DHCP-DDNS server exits its
  event lo

**DHCP_DDNS_SHUTDOWN_COMMAND**

application received shutdown command with args: %1

  This is a debug message issued when the application has been instructed
  to shut down by the controller.

**DHCP_DDNS_STARTED**

Kea DHCP-DDNS server version %1 started

  This informational message indicates that the DHCP-DDNS server has
  processed all configuration information and is ready to begin processing.
  The version is also printed.

**DHCP_DDNS_STARTING_TRANSACTION**

Request ID %1:

  This is a debug message issued when DHCP-DDNS has begun a transaction for
  a given request.

**DHCP_DDNS_STATE_MODEL_UNEXPECTED_ERROR**

Request ID %1: application encountered an unexpected error while carrying out a NameChangeRequest: %2

  This is error message issued when the application fails to process a
  NameChangeRequest correctly. Some or all of the DNS updates requested as part
  of this update did not succeed. This is a programmatic error and should be
  reported.

**DHCP_DDNS_TRANS_SEND_ERROR**

Request ID %1: application encountered an unexpected error while attempting to send a DNS update: %2

  This is error message issued when the application is able to construct an update
  message but the attempt to send it suffered an unexpected error. This is most
  likely a programmatic error, rather than a communications issue. Some or all
  of the DNS updates requested as part of this request did not succeed.

**DHCP_DDNS_UDP_SENDER_WATCH_SOCKET_CLOSE_ERROR**

watch socket failed to close: %1

  This is an error message that indicates the application was unable to close
  the inbound or outbound side of a NCR sender's watch socket. While technically
  possible the error is highly unlikely to occur and should not impair the
  application's ability to process requests.

**DHCP_DDNS_UNCAUGHT_NCR_RECV_HANDLER_ERROR**

unexpected exception thrown from the application receive completion handler: %1

  This is an error message that indicates that an exception was thrown but not
  caught in the application's request receive completion handler.  This is a
  programmatic error that needs to be reported.  Dependent upon the nature of
  the error the application may or may not continue operating normally.

**DHCP_DDNS_UPDATE_REQUEST_SENT**

Request ID %1: %2 to server: %3

  This is a debug message issued when DHCP_DDNS sends a DNS request to a DNS
  server.

EVAL
~~~~

**EVAL_DEBUG_AND**

Popping %1 and %2 pushing %3

  This debug message indicates that two values are popped from
  the value stack.  Then are then combined via logical and and
  the result is pushed onto the value stack.

**EVAL_DEBUG_CONCAT**

Popping %1 and %2 pushing %3

  This debug message indicates that the two strings are being popped off
  of the stack.  They are then concatenated and the resulting string is
  pushed onto the stack.  The strings are displayed in hex.

**EVAL_DEBUG_EQUAL**

Popping %1 and %2 pushing result %3

  This debug message indicates that the two strings are being popped off
  of the value stack and the result of comparing them is being pushed onto
  the value stack.  The strings are displayed in hex.

**EVAL_DEBUG_HEXSTRING**

Pushing hex string %1

  This debug message indicates that the given binary string is being pushed
  onto the value stack.  The string is displayed in hex.

**EVAL_DEBUG_IFELSE_FALSE**

Popping %1 (false) and %2, leaving %3

  This debug message indicates that the condition is false so
  the iftrue branch value is removed and the ifelse branch value
  is left on the value stack.

**EVAL_DEBUG_IFELSE_TRUE**

Popping %1 (true) and %2, leaving %3

  This debug message indicates that the condition is true so
  the ifelse branch value is removed and the iftrue branch value
  is left on the value stack.

**EVAL_DEBUG_INT16TOTEXT**

Pushing Int16 %1

  This debug message indicates that the given address string representation is
  being pushed onto the value stack.  This represents a 16 bit integer.

**EVAL_DEBUG_INT32TOTEXT**

Pushing Int32 %1

  This debug message indicates that the given address string representation is
  being pushed onto the value stack.  This represents a 32 bit integer.

**EVAL_DEBUG_INT8TOTEXT**

Pushing Int8 %1

  This debug message indicates that the given address string representation is
  being pushed onto the value stack.  This represents an 8 bit integer.

**EVAL_DEBUG_IPADDRESS**

Pushing IPAddress %1

  This debug message indicates that the given binary string is being pushed
  onto the value stack.  This represents either an IPv4 or IPv6 address.
  The string is displayed in hex.

**EVAL_DEBUG_IPADDRESSTOTEXT**

Pushing IPAddress %1

  This debug message indicates that the given address string representation is
  being pushed onto the value stack.  This represents either an IPv4 or IPv6
  address.

**EVAL_DEBUG_MEMBER**

Checking membership of '%1', pushing result %2

  This debug message indicates that the membership of the packet for
  the client class was checked.

**EVAL_DEBUG_NOT**

Popping %1 pushing %2

  This debug message indicates that the first value is popped from
  the value stack, negated and then pushed onto the value stack.
  The string is displayed in text.

**EVAL_DEBUG_OPTION**

Pushing option %1 with value %2

  This debug message indicates that the given string representing the
  value of the requested option is being pushed onto the value stack.
  The string may be the text or binary value of the string based on the
  representation type requested (.text or .hex) or "true" or "false" if
  the requested type is .exists.  The option code may be for either an
  option or a sub-option as requested in the classification statement.

**EVAL_DEBUG_OR**

Popping %1 and %2 pushing %3

  This debug message indicates that two values are popped from
  the value stack.  Then are then combined via logical or and
  the result is pushed onto the value stack. The string is displayed
  in text.

**EVAL_DEBUG_PKT**

Pushing PKT meta data %1 with value %2

  This debug message indicates that the given binary string representing
  the value of the requested meta data is being pushed onto the value stack.
  The string is displayed in hex at the exception of interface name.

**EVAL_DEBUG_PKT4**

Pushing PKT4 field %1 with value %2

  This debug message indicates that the given binary string representing
  the value of the requested field is being pushed onto the value stack.
  The string is displayed in hex.

**EVAL_DEBUG_PKT6**

Pushing PKT6 field %1 with value %2

  This debug message indicates that the given binary string representing
  the value of the requested field is being pushed onto the value stack.
  The string is displayed in hex.

**EVAL_DEBUG_RELAY6**

Pushing PKT6 relay field %1 nest %2 with value %3

  This debug message indicates that the given binary string representing
  the value of the requested field is being pushed onto the value stack.
  The string is displayed in hex.

**EVAL_DEBUG_RELAY6_RANGE**

Pushing PKT6 relay field %1 nest %2 with value %3

  This debug message is generated if the nest field is out of range.  The
  empty string will always be the value pushed onto the stack.

**EVAL_DEBUG_SPLIT**

Popping field %1, delimiters %2, string %3, pushing result %4

  This debug message indicates that three values are being popped from the stack
  and a result is being pushed onto the stack. The values being popped are the
  field, delimiter and string. The result is the extracted field which is pushed
  onto the stack. The strings are displayed in hex.

**EVAL_DEBUG_SPLIT_DELIM_EMPTY**

Popping field %1, delimiters %2, string %3, pushing result %4

  This debug message indicates that the delimiter popped from the stack was empty
  and so the result will be the entire string. The field, delimiter and string
  are still popped from the stack and the result is still pushed.

**EVAL_DEBUG_SPLIT_EMPTY**

Popping field %1, delimiters %2, string %3, pushing result %4

  This debug message indicates that the string popped from the stack was empty
  and so the result will also be empty. The field, delimiter and string are
  still popped from the stack and the result is still pushed.

**EVAL_DEBUG_SPLIT_FIELD_OUT_OF_RANGE**

Popping field %1, delimiters %2, string %3, pushing result %4

  This debug message indicates that the field is either less than one or larger
  than the number of fields in the string popped from the stack. The result will
  be empty. The field, delimiter and string are still popped from the stack and
  the result is still pushed.

**EVAL_DEBUG_STRING**

Pushing text string %1

  This debug message indicates that the given text string is being pushed
  onto the value stack.  The string is displayed in text.

**EVAL_DEBUG_SUBSTRING**

Popping length %1, start %2, string %3 pushing result %4

  This debug message indicates that three values are being popped from
  the value stack and a result is being pushed onto the value stack.  The
  values being popped are the starting point and length of a substring to
  extract from the given string.  The resulting string is pushed onto
  the stack.  The strings are displayed in hex.

**EVAL_DEBUG_SUBSTRING_EMPTY**

Popping length %1, start %2, string %3 pushing result %4

  This debug message indicates that the string popped from the stack was empty
  and so the result will also be empty.  The start, length and string are
  still popped from the stack and the result is still pushed.

**EVAL_DEBUG_SUBSTRING_RANGE**

Popping length %1, start %2, string %3 pushing result %4

  This debug message indicates that the value of start is outside of the
  string and an empty result will be pushed onto the stack.  The start,
  length and string are still popped from the stack and the result is
  still pushed.  The strings are displayed in hex.

**EVAL_DEBUG_SUB_OPTION**

Pushing option %1 sub-option %2 with value %3

  This debug message indicates that the given string representing the
  value of the requested sub-option of the requested parent option is
  being pushed onto the value stack. The string may be the text or
  binary value of the string based on the representation type requested
  (.text or .hex) or "true" or "false" if the requested type is .exists.
  The codes are the parent option and the sub-option codes as requested
  in the classification statement.

**EVAL_DEBUG_SUB_OPTION_NO_OPTION**

Requested option %1 sub-option %2, but the parent option is not present, pushing result %3

  This debug message indicates that the parent option was not found.
  The codes are the parent option and the sub-option codes as requested
  in the classification statement.

**EVAL_DEBUG_TOHEXSTRING**

Popping binary value %1 and separator %2, pushing result %3

  This debug message indicates that two values are being popped from
  the value stack and a result is being pushed onto the value stack.
  The values being popped are the binary value to convert and the separator.
  The binary value is converted to its hexadecimal string representation
  and pushed onto the stack. The binary value is displayed in hex.

**EVAL_DEBUG_UINT16TOTEXT**

Pushing UInt16 %1

  This debug message indicates that the given address string representation is
  being pushed onto the value stack.  This represents a 16 bit unsigned integer.

**EVAL_DEBUG_UINT32TOTEXT**

Pushing UInt32 %1

  This debug message indicates that the given address string representation is
  being pushed onto the value stack.  This represents a 32 bit unsigned integer.

**EVAL_DEBUG_UINT8TOTEXT**

Pushing UInt8 %1

  This debug message indicates that the given address string representation is
  being pushed onto the value stack.  This represents an 8 bit unsigned integer.

**EVAL_DEBUG_VENDOR_CLASS_DATA**

Data %1 (out of %2 received) in vendor class found, pushing result '%3'

  This debug message indicates that vendor class option was found and passed
  enterprise-id checks and has sufficient number of data chunks. The total number
  of chunks and value pushed are reported as debugging aid.

**EVAL_DEBUG_VENDOR_CLASS_DATA_NOT_FOUND**

Requested data index %1, but option with enterprise-id %2 has only %3 data tuple(s), pushing result '%4'

  This debug message indicates that vendor class option was found and passed
  enterprise-id checks, but does not have sufficient number of data chunks.
  Note that the index starts at 0, so there has to be at least (index + 1)
  data chunks.

**EVAL_DEBUG_VENDOR_CLASS_ENTERPRISE_ID**

Pushing enterprise-id %1 as result 0x%2

  This debug message indicates that the expression has been evaluated and vendor
  class option was found and its enterprise-id is being reported.

**EVAL_DEBUG_VENDOR_CLASS_ENTERPRISE_ID_MISMATCH**

Was looking for %1, option had %2, pushing result '%3'

  This debug message indicates that the expression has been evaluated
  and vendor class option was found, but has different enterprise-id than specified
  in the expression.

**EVAL_DEBUG_VENDOR_CLASS_EXISTS**

Option with enterprise-id %1 found, pushing result '%2'

  This debug message indicates that the expression has been evaluated and vendor
  class option was found.

**EVAL_DEBUG_VENDOR_CLASS_NO_OPTION**

Option with code %1 missing, pushing result '%2'

  This debug message indicates that the expression has been evaluated
  and vendor class option was not found.

**EVAL_DEBUG_VENDOR_ENTERPRISE_ID**

Pushing enterprise-id %1 as result 0x%2

  This debug message indicates that the expression has been evaluated and vendor
  option was found and its enterprise-id is being reported.

**EVAL_DEBUG_VENDOR_ENTERPRISE_ID_MISMATCH**

Was looking for %1, option had %2, pushing result '%3'

  This debug message indicates that the expression has been evaluated
  and vendor option was found, but has different enterprise-id than specified
  in the expression.

**EVAL_DEBUG_VENDOR_EXISTS**

Option with enterprise-id %1 found, pushing result '%2'

  This debug message indicates that the expression has been evaluated and vendor
  option was found.

**EVAL_DEBUG_VENDOR_NO_OPTION**

Option with code %1 missing, pushing result '%2'

  This debug message indicates that the expression has been evaluated
  and vendor option was not found.

FLEX
~~~~

**FLEX_OPTION_LOAD_ERROR**

loading Flex Option hooks library failed: %1

  This error message indicates an error during loading the Flex Option
  hooks library. The details of the error are provided as argument of
  the log message.

**FLEX_OPTION_PROCESS_ADD**

Added the option code %1 with value %2

  This debug message is printed when an option was added into the response
  packet. The option code and the value (between quotes if printable, in
  hexadecimal if not) are provided.

**FLEX_OPTION_PROCESS_CLIENT_CLASS**

Skip processing of the option code %1 for class '%2'

  This debug message is printed when the processing for an option is skipped
  because the query does not belongs to the client class. The option code and
  the client class name are provided.

**FLEX_OPTION_PROCESS_ERROR**

An error occurred processing query %1: %2

  This error message indicates an error during processing of a query
  by the Flex Option hooks library. The client identification information
  from the query and the details of the error are provided as arguments
  of the log message.

**FLEX_OPTION_PROCESS_REMOVE**

Removed option code %1

  This debug message is printed when an option was removed from the response
  packet. The option code is provided.

**FLEX_OPTION_PROCESS_SUB_ADD**

Added the sub-option code %1 in option code %2 with value %3

  This debug message is printed when an sub-option was added into the response
  packet. The sub-option and container option codes, and the value
  (between quotes if printable, in hexadecimal if not) are provided.

**FLEX_OPTION_PROCESS_SUB_CLIENT_CLASS**

Skip processing of the sub-option code %1 in option code %2 for class '%3'

  This debug message is printed when the processing for a sub-option is skipped
  because the query does not belongs to the client class. The sub-option and
  container option codes, and the client class name are provided.

**FLEX_OPTION_PROCESS_SUB_REMOVE**

Removed sub-option code %1 in option code %2

  This debug message is printed when a sub-option was removed from the response
  packet. The sub-option and container option codes are provided.

**FLEX_OPTION_PROCESS_SUB_SUPERSEDE**

Supersedes the sub-option code %1 in option code %2 with value %3

  This debug message is printed when a sub-option was superseded into the
  response packet. The sub-option and container option codes, and the value
  (between quotes if printable, in hexadecimal if not) are provided.

**FLEX_OPTION_PROCESS_SUPERSEDE**

Supersedes the option code %1 with value %2

  This debug message is printed when an option was superseded into the response
  packet. The option code and the value (between quotes if printable, in
  hexadecimal if not) are provided.

**FLEX_OPTION_PROCESS_VENDOR_ID_MISMATCH**

Skip processing of vendor option code %1 with vendor id %2 not matching wanted %3

  This debug message is printed when a sub-option of a vendor option is
  processed but vendor ids do not match. The code of the vendor option
  and the two vendor ids are provided.

HA
~~

**HA_BUFFER4_RECEIVE_FAILED**

buffer4_receive callout failed: %1

  This error message is issued when the callout for the buffer4_receive hook
  point failed.  This may occur as a result of an internal server error.
  The argument contains a reason for the error.

**HA_BUFFER4_RECEIVE_NOT_FOR_US**

%1: dropping query to be processed by another server

  This debug message is issued when the received DHCPv4 query is dropped
  by this server because it should be served by another server. This
  is the case when the remote server was designated to process the packet
  as a result of load balancing or because it is a primary server in the
  hot standby configuration. The argument provides client identification
  information retrieved from the query.

**HA_BUFFER4_RECEIVE_PACKET_OPTIONS_SKIPPED**

an error unpacking an option, caused subsequent options to be skipped: %1

  A debug message issued when an option failed to unpack correctly, making it
  impossible to unpack the remaining options in the DHCPv4 query. The server
  will still attempt to service the packet. The sole argument provides a
  reason for unpacking error.

**HA_BUFFER4_RECEIVE_UNPACK_FAILED**

failed to parse query from %1 to %2, received over interface %3, reason: %4

  This debug message is issued when received DHCPv4 query is malformed and
  can't be parsed by the buffer4_receive callout. The query will be
  dropped by the server. The first three arguments specify source IP address,
  destination IP address and the interface. The last argument provides a
  reason for failure.

**HA_BUFFER6_RECEIVE_FAILED**

buffer6_receive callout failed: %1

  This error message is issued when the callout for the buffer6_receive hook
  point failed. This may occur as a result of an internal server error.
  The argument contains a reason for the error.

**HA_BUFFER6_RECEIVE_NOT_FOR_US**

%1: dropping query to be processed by another server

  This debug message is issued when the received DHCPv6 query is dropped
  by this server because it should be served by another server. This
  is the case when the remote server was designated to process the packet
  as a result of load balancing or because it is a primary server in the
  hot standby configuration. The argument provides client identification
  information retrieved from the query.

**HA_BUFFER6_RECEIVE_PACKET_OPTIONS_SKIPPED**

an error unpacking an option, caused subsequent options to be skipped: %1

  A debug message issued when an option failed to unpack correctly, making it
  impossible to unpack the remaining options in the DHCPv6 query. The server
  will still attempt to service the packet. The sole argument provides a
  reason for unpacking error.

**HA_BUFFER6_RECEIVE_UNPACK_FAILED**

failed to parse query from %1 to %2, received over interface %3, reason: %4

  This debug message is issued when received DHCPv6 query is malformed and
  can't be parsed by the buffer6_receive callout. The query will be
  dropped by the server. The first three arguments specify source IP address,
  destination IP address and the interface. The last argument provides a
  reason for failure.

**HA_COMMAND_PROCESSED_FAILED**

command_processed callout failed: %1

  This error message is issued when the callout for the command_processed hook
  point failed. The argument contains a reason for the error.

**HA_COMMUNICATION_INTERRUPTED**

communication with %1 is interrupted

  This warning message is issued by the server which discovered that the
  communication to the active partner has been interrupted for a time
  period longer than the configured heartbeat-delay time. At this stage
  the server starts the failover procedure by monitoring the DHCP traffic
  sent to the partner and checking whether the partner server responds to
  this traffic. If the max-unacked-clients value is set to 0 such
  verification is disabled in which case the server will transition to
  the partner-down state.

**HA_COMMUNICATION_INTERRUPTED_CLIENT4**

%1: new client attempting to get a lease from the partner

  This informational message is issued when the surviving server observes
  a DHCP packet sent to the partner with which the communication is interrupted.
  The client whose packet is observed is not yet considered "unacked" because
  the secs field value does not exceed the configured threshold specified
  with max-ack-delay.

**HA_COMMUNICATION_INTERRUPTED_CLIENT4_UNACKED**

%1: partner server failed to respond, %2 clients unacked so far, %3 clients left before transitioning to the partner-down state

  This informational message is issued when the surviving server determines
  that its partner failed to respond to the DHCP query and that this client
  is considered to not be served by the partner. The surviving server counts
  such clients and if the number of such clients exceeds the max-unacked-clients
  threshold, the server will transition to the partner-down state. The first
  argument contains client identification information. The second argument
  specifies the number of clients to which the server has failed to respond.
  The third argument specifies the number of additional clients which, if not
  provisioned, will cause the server to transition to the partner-down state.

**HA_COMMUNICATION_INTERRUPTED_CLIENT6**

%1: new client attempting to get a lease from the partner

  This informational message is issued when the surviving server observes
  a DHCP packet sent to the partner with which the communication is interrupted.
  The client whose packet is observed is not yet considered "unacked" because
  the elapsed time option value does not exceed the configured threshold
  specified with max-ack-delay. The sole argument specifies client
  identification information.

**HA_COMMUNICATION_INTERRUPTED_CLIENT6_UNACKED**

%1: partner server failed to respond, %2 clients unacked so far, %3 clients left before transitioning to the partner-down state

  This informational message is issued when the surviving server determines
  that its partner failed to respond to the DHCP query and that this client
  is considered to not be served by the partner. The surviving server counts
  such clients and if the number of such clients exceeds the max-unacked-clients
  threshold, the server will transition to the partner-down state. The first
  argument contains client identification information. The second argument
  specifies the number of clients to which the server has failed to respond.
  The third argument specifies the number of additional clients which, if not
  provisioned, will cause the server to transition to the partner-down state.

**HA_CONFIGURATION_FAILED**

failed to configure High Availability hooks library: %1

  This error message is issued when there is an error configuring the HA hooks
  library. The argument provides the detailed error message.

**HA_CONFIGURATION_SUCCESSFUL**

HA hook library has been successfully configured

  This informational message is issued when the HA hook library configuration
  parser successfully parses and validates the new configuration.

**HA_CONFIG_AUTO_FAILOVER_DISABLED**

auto-failover disabled for %1

  This warning message is issued to indicate that the 'auto-failover' parameter
  was administratively disabled for the specified server. The server will not
  automatically start serving partner's scope when the partner failure is detected.
  The server administrator will need to enable this scope manually by
  sending appropriate ha-scopes command.

**HA_CONFIG_DHCP_MT_DISABLED**

HA multi-threading has been disabled, it cannot be enabled when Kea global multi-threading is disabled

  This informational message is issued when HA configuration has enabled
  multi-threading while Kea global configuration has multi-threading disabled.

**HA_CONFIG_LEASE_SYNCING_DISABLED**

lease database synchronization between HA servers is disabled

  This warning message is issued when the lease database synchronization is
  administratively disabled. This is valid configuration if the leases are
  replicated between lease databases via some other mechanism, e.g. SQL
  database replication.

**HA_CONFIG_LEASE_SYNCING_DISABLED_REMINDER**

bypassing SYNCING state because lease database synchronization is administratively disabled

  This informational message is issued as a reminder that lease database
  synchronization is administratively disabled and therefore the server
  transitions directly from the "waiting" to "ready" state.

**HA_CONFIG_LEASE_UPDATES_AND_SYNCING_DIFFER**

unusual configuration where "send-lease-updates": %1 and "sync-leases": %2

  This warning message is issued when the configuration values of the
  send-lease-updates and sync-leases parameters differ. This may be a
  valid configuration but is unusual. Normally, if the lease database
  with replication is in use, both values are set to false. If a lease
  database without replication is in use (e.g. memfile), both values
  are set to true. Providing different values for those parameters means
  that an administrator either wants the server to not synchronize
  leases upon startup but later send lease updates to the partner, or
  the lease database should be synchronized upon startup, but no lease
  updates are later sent as a result of leases allocation.

**HA_CONFIG_LEASE_UPDATES_DISABLED**

lease updates will not be generated

  This warning message is issued when the lease updates are administratively
  disabled. This is valid configuration if the leases are replicated to the
  partner's database via some other mechanism, e.g. SQL database replication.

**HA_CONFIG_LEASE_UPDATES_DISABLED_REMINDER**

lease updates are administratively disabled and will not be generated while in %1 state

  This informational message is issued as a reminder that the lease updates
  are administratively disabled and will not be issued in the HA state to
  which the server has transitioned. The sole argument specifies the state
  into which the server has transitioned.

**HA_CONFIG_SYSTEM_MT_UNSUPPORTED**

HA multi-threading has been disabled, auto-detection of thread support reports 0

  This informational message is issued when HA multi-threading configuration has
  specified auto-detection for the number of threads to use and the system
  reports the number of concurrent threads as 0. If you know your system can
  support multiple threads, then you may override this condition by specifying
  explicit values for http-listener-threads and http-client-threads.

**HA_CONTINUE_HANDLER_FAILED**

ha-continue command failed: %1

  This error message is issued to indicate that the ha-continue command handler
  failed while processing the command. The argument provides the reason for
  failure.

**HA_DEINIT_OK**

unloading High Availability hooks library successful

  This informational message indicates that the High Availability hooks library
  has been unloaded successfully.

**HA_DHCP4_START_SERVICE_FAILED**

failed to start DHCPv4 HA service in dhcp4_srv_configured callout: %1

  This error message is issued when an attempt to start High Availability service
  for the DHCPv4 server failed in the dhcp4_srv_configured callout. This
  is internal server error and a bug report should be created.

**HA_DHCP6_START_SERVICE_FAILED**

failed to start DHCPv4 HA service in dhcp6_srv_configured callout: %1

  This error message is issued when an attempt to start High Availability service
  for the DHCPv4 server failed in the dhcp4_srv_configured callout. This
  is internal server error and a bug report should be created.

**HA_DHCP_DISABLE_COMMUNICATIONS_FAILED**

failed to send request to disable DHCP service of %1: %2

  This warning message indicates that there was a problem in communication with a
  HA peer while sending the dhcp-disable command. The first argument provides the
  remote server's name. The second argument provides a reason for failure.

**HA_DHCP_DISABLE_FAILED**

failed to disable DHCP service of %1: %2

  This warning message indicates that a peer returned an error status code
  in response to a dhcp-disable command.  The first argument provides the
  remote server's name. The second argument provides a reason for failure.

**HA_DHCP_ENABLE_COMMUNICATIONS_FAILED**

failed to send request to enable DHCP service of %1: %2

  This warning message indicates that there was a problem in communication with a
  HA peer while sending the dhcp-enable command. The first argument provides the
  remote server's name. The second argument provides a reason for failure.

**HA_DHCP_ENABLE_FAILED**

failed to enable DHCP service of %1: %2

  This warning message indicates that a peer returned an error status code
  in response to a dhcp-enable command.  The first argument provides the
  remote server's name. The second argument provides a reason for failure.

**HA_HEARTBEAT_COMMUNICATIONS_FAILED**

failed to send heartbeat to %1: %2

  This warning message indicates that there was a problem in communication with a
  HA peer while sending a heartbeat. This is a first sign that the peer may be
  down. The server will keep trying to send heartbeats until it considers that
  communication is interrupted.

**HA_HEARTBEAT_FAILED**

heartbeat to %1 failed: %2

  This warning message indicates that a peer returned an error status code
  in response to a heartbeat. This is the sign that the peer may not function
  properly. The server will keep trying to send heartbeats until it considers
  that communication is interrupted.

**HA_HEARTBEAT_HANDLER_FAILED**

heartbeat command failed: %1

  This error message is issued to indicate that the heartbeat command handler
  failed while processing the command. The argument provides the reason for
  failure.

**HA_HIGH_CLOCK_SKEW**

%1, please synchronize clocks!

  This warning message is issued when the clock skew between the active servers
  exceeds 30 seconds. The HA service continues to operate but may not function
  properly, especially for low lease lifetimes. The administrator should
  should synchronize the clocks, e.g. using NTP. If the clock skew exceeds
  60 seconds, the HA service will terminate.

**HA_HIGH_CLOCK_SKEW_CAUSES_TERMINATION**

%1, causing HA service to terminate

  This warning message is issued when the clock skew between the active servers
  exceeds 60 seconds. The HA service stops. The servers will continue to respond
  to the DHCP queries but won't exchange lease updates or send heartbeats.
  The administrator is required to synchronize the clocks and then restart the
  servers to resume the HA service.

**HA_INIT_OK**

loading High Availability hooks library successful

  This informational message indicates that the High Availability hooks library
  has been loaded successfully.

**HA_INVALID_PARTNER_STATE_COMMUNICATION_RECOVERY**

partner is in the communication-recovery state unexpectedly

  This warning message is issued when a partner is in the communication-recovery
  state, and this server is not running in the load balancing mode. The server
  may only transition to the communication-recovery state when it runs in the
  load balancing mode. The HA mode of both servers must be the same.

**HA_INVALID_PARTNER_STATE_HOT_STANDBY**

partner is in the hot-standby state unexpectedly

  This warning message is issued when a partner is in the hot-standby state,
  and this server is not running in the hot standby mode. The server may only
  transition to the hot-standby state when it runs in the hot standby mode.
  The HA mode of both servers must be the same.

**HA_INVALID_PARTNER_STATE_LOAD_BALANCING**

partner is in the load-balancing state unexpectedly

  This warning message is issued when a partner is in the load-balancing state,
  and this server is not running in the load balancing mode. The server may only
  transition to the load-balancing state when it runs in the load balancing mode.
  The HA mode of both servers must be the same.

**HA_LEASES4_COMMITTED_FAILED**

leases4_committed callout failed: %1

  This error message is issued when the callout for the leases4_committed hook
  point failed. This includes unexpected errors like wrong arguments provided to
  the callout by the DHCP server (unlikely internal server error).
  The argument contains a reason for the error.

**HA_LEASES4_COMMITTED_NOTHING_TO_UPDATE**

%1: leases4_committed callout was invoked without any leases

  This debug message is issued when the "leases4_committed" callout returns
  because there are neither new leases nor deleted leases for which updates
  should be sent. The sole argument specifies the details of the client
  which sent the packet.

**HA_LEASES6_COMMITTED_FAILED**

leases6_committed callout failed: %1

  This error message is issued when the callout for the leases6_committed hook
  point failed. This includes unexpected errors like wrong arguments provided to
  the callout by the DHCP server (unlikely internal server error).
  The argument contains a reason for the error.

**HA_LEASES6_COMMITTED_NOTHING_TO_UPDATE**

%1: leases6_committed callout was invoked without any leases

  This debug message is issued when the "leases6_committed" callout returns
  because there are neither new leases nor deleted leases for which updates
  should be sent. The sole argument specifies the details of the client
  which sent the packet.

**HA_LEASES_BACKLOG_COMMUNICATIONS_FAILED**

failed to communicate with %1 while sending lease updates backlog: %2

  This error message is issued to indicate that there was a communication error
  with a partner server while sending outstanding lease updates after resuming
  connection. The second argument contains a reason for the error.

**HA_LEASES_BACKLOG_FAILED**

failed to send lease updates backlog to %1: %2

  This error message is issued to indicate that sending lease updates backlog
  to a partner server failed. The lease updates backlog is sent to the partner
  after resuming temporarily broken communication with the partner. If this
  operation fails the server will transition to the waiting state to initiate
  full lease database synchronization.

**HA_LEASES_BACKLOG_NOTHING_TO_SEND**

no leases in backlog after communication recovery

  This informational message is issued when there are no outstanding leases to
  be sent after communication recovery with a partner. This means that the
  communication interruption was short enough that no DHCP clients obtained
  any leases from the server while it was in the communication-recovery state.
  The server may now transition to the load-balancing state.

**HA_LEASES_BACKLOG_START**

starting to send %1 outstanding lease updates to %2

  This informational message is issued when the server starts to send outstanding
  lease updates to the partner after resuming communications. The first argument
  specifies the number of lease updates to be sent. The name of the partner is
  specified with the second argument.

**HA_LEASES_BACKLOG_SUCCESS**

sending lease updates backlog to %1 successful in %2

  This informational message is issued when server successfully completes
  sending lease updates backlog to the partner. The first argument specifies the
  name of the remote server. The second argument specifies the duration of
  this operation.

**HA_LEASES_SYNC_COMMUNICATIONS_FAILED**

failed to communicate with %1 while syncing leases: %2

  This error message is issued to indicate that there was a communication error
  with a partner server while trying to fetch leases from its lease database.
  The argument contains a reason for the error.

**HA_LEASES_SYNC_FAILED**

failed to synchronize leases with %1: %2

  This error message is issued to indicate that there was a problem while
  parsing a response from the server from which leases have been fetched for
  local database synchronization. The argument contains a reason for the error.

**HA_LEASES_SYNC_LEASE_PAGE_RECEIVED**

received %1 leases from %2

  This informational message is issued during lease database synchronization
  to indicate that a bulk of leases have been received. The first argument
  holds the count of leases received. The second argument specifies the
  partner server name.

**HA_LEASE_SYNC_FAILED**

synchronization failed for lease: %1, reason: %2

  This warning message is issued when creating or updating a lease in the
  local lease database fails. The lease information in the JSON format is
  provided as a first argument. The second argument provides a reason for
  the failure.

**HA_LEASE_SYNC_STALE_LEASE4_SKIP**

skipping stale lease %1 in subnet %2

  This debug message is issued during lease database synchronization, when
  fetched IPv4 lease instance appears to be older than the instance in the
  local database. The newer instance is left in the database and the fetched
  lease is dropped. The remote server will still hold the older lease instance
  until it synchronizes its database with this server. The first argument specifies
  leased address. The second argument specifies a subnet to which the lease
  belongs.

**HA_LEASE_SYNC_STALE_LEASE6_SKIP**

skipping stale lease %1 in subnet %2

  This debug message is issued during lease database synchronization, when
  fetched IPv6 lease instance appears to be older than the instance in the
  local database. The newer instance is left in the database and the fetched
  lease is dropped. The remote server will still hold the older lease instance
  until it synchronizes its database with this server. The first argument specifies
  leased address. The second argument specifies a subnet to which the lease
  belongs.

**HA_LEASE_UPDATES_DISABLED**

lease updates will not be sent to the partner while in %1 state

  This informational message is issued to indicate that lease updates will
  not be sent to the partner while the server is in the current state. The
  argument specifies the server's current state name. The lease updates
  are still sent to the backup servers if they are configured but any
  possible errors in communication with the backup servers are ignored.

**HA_LEASE_UPDATES_ENABLED**

lease updates will be sent to the partner while in %1 state

  This informational message is issued to indicate that lease updates will
  be sent to the partner while the server is in the current state. The
  argument specifies the server's current state name.

**HA_LEASE_UPDATE_COMMUNICATIONS_FAILED**

%1: failed to communicate with %2: %3

  This warning message indicates that there was a problem in communication with a
  HA peer while processing a DHCP client query and sending lease update. The
  client's DHCP message will be dropped.

**HA_LEASE_UPDATE_CREATE_UPDATE_FAILED_ON_PEER**

%1: failed to create or update the lease having type %2 for address %3, reason: %4

  This informational message is issued when one of the leases failed to be
  created or updated on the HA peer while processing the lease updates sent
  from this server. This may indicate an issue with communication between
  the peer and its lease database.

**HA_LEASE_UPDATE_DELETE_FAILED_ON_PEER**

%1: failed to delete the lease having type %2 for address %3, reason: %4

  This informational message is issued when one of the leases failed to delete
  on the HA peer while processing lease updates sent from this server. Typically,
  the lease fails to delete when it doesn't exist in the peer's database.

**HA_LEASE_UPDATE_FAILED**

%1: lease update to %2 failed: %3

  This warning message indicates that a peer returned an error status code
  in response to a lease update. The client's DHCP message will be dropped.

**HA_LOAD_BALANCING_DUID_MISSING**

load balancing failed for the DHCPv6 message (transaction id: %1) because DUID is missing

  This debug message is issued when the HA hook library was unable to load
  balance an incoming DHCPv6 query because neither client identifier nor
  HW address was included in the query. The query will be dropped. The
  sole argument contains transaction id.

**HA_LOAD_BALANCING_IDENTIFIER_MISSING**

load balancing failed for the DHCPv4 message (transaction id: %1) because HW address and client identifier are missing

  This debug message is issued when the HA hook library was unable to load
  balance an incoming DHCPv4 query because neither client identifier nor
  HW address was included in the query. The query will be dropped. The
  sole argument contains transaction id.

**HA_LOCAL_DHCP_DISABLE**

local DHCP service is disabled while the %1 is in the %2 state

  This informational message is issued to indicate that the local DHCP service
  is disabled because the server remains in a state in which the server
  should not respond to DHCP clients, e.g. the server hasn't synchronized
  its lease database. The first argument specifies server name. The second
  argument specifies server's state.

**HA_LOCAL_DHCP_ENABLE**

local DHCP service is enabled while the %1 is in the %2 state

  This informational message is issued to indicate that the local DHCP service
  is enabled because the server remains in a state in which it should
  respond to the DHCP clients. The first argument specifies server name.
  The second argument specifies server's state.

**HA_MAINTENANCE_CANCEL_HANDLER_FAILED**

ha-maintenance-cancel command failed: %1

  This error message is issued to indicate that the ha-maintenance-cancel command
  handler failed while processing the command. The argument provides the reason for
  failure.

**HA_MAINTENANCE_NOTIFY_CANCEL_COMMUNICATIONS_FAILED**

failed to send ha-maintenance-notify to %1 in attempt to cancel its maintenance: %2

  This warning message indicates that there was a problem in communication with a
  HA peer while sending the ha-maintenance-notify command with the cancel flag
  set to true. The first argument provides the remote server's name. The second
  argument provides a reason for failure.

**HA_MAINTENANCE_NOTIFY_CANCEL_FAILED**

error returned while processing ha-maintenance-notify by %1 in attempt to cancel its maintenance: %2

  This warning message indicates that a peer returned an error status code
  in response to a ha-maintenance-notify command with the cancel flag set to
  true. The first argument provides the remote server's name. The second
  argument provides a reason for failure.

**HA_MAINTENANCE_NOTIFY_COMMUNICATIONS_FAILED**

failed to send ha-maintenance-notify to %1: %2

  This warning message indicates that there was a problem in communication with a
  HA peer while sending the ha-maintenance-notify command. The first argument provides the
  remote server's name. The second argument provides a reason for failure.

**HA_MAINTENANCE_NOTIFY_FAILED**

error returned while processing ha-maintenance-notify by %1: %2

  This warning message indicates that a peer returned an error status code
  in response to a ha-maintenance-notify command.  The first argument provides the
  remote server's name. The second argument provides a reason for failure.

**HA_MAINTENANCE_NOTIFY_HANDLER_FAILED**

ha-maintenance-notify command failed: %1

  This error message is issued to indicate that the ha-maintenance-notify command
  handler failed while processing the command. The argument provides the reason for
  failure.

**HA_MAINTENANCE_SHUTDOWN_SAFE**

the server can now be shutdown for maintenance as the partner has taken over the DHCP traffic

  This informational message is displayed after the server transitions to the
  in-maintenance state. This server no longer responds to any DHCP queries and its
  partner - in partner-in-maintenance state - has taken over the DHCP traffic.
  When the server in-maintenance state is shut down, the partner moves to
  the partner-down state immediately.

**HA_MAINTENANCE_STARTED**

the server is now in the partner-in-maintenance state and the partner is in-maintenance state

  This informational message is displayed when the server receiving the
  ha-maintenance-start command transitions to the partner-in-maintenance
  state. The server does it after sending the ha-maintenance-notify to
  its partner to put the partner in the in-maintenance state. From now on,
  the server in the partner-in-maintenance state will be responding to all
  queries and the partner will respond to no queries. The partner may be
  safely shut down for maintenance in which case this server will
  automatically transition from the partner-in-maintenance state to the
  partner-down state.

**HA_MAINTENANCE_STARTED_IN_PARTNER_DOWN**

the server is now in the partner-down mode as a result of requested maintenance

  This informational message is displayed when the server receiving the
  ha-maintenance-start command transitions to the partner-down state
  because it was unable to communicate with the partner while receiving
  the command. It is assumed that in such situation the partner is
  already offline for the maintenance. Note that in this case the
  normal failover procedure does not take place. The server does not wait
  for a heartbeat to fail several times, nor it monitors the DHCP traffic
  for not responded queries. In the maintenance case the server transitions
  to the partner-down state when it first encounters a communication
  problem with the partner.

**HA_MAINTENANCE_START_HANDLER_FAILED**

ha-maintenance-start command failed: %1

  This error message is issued to indicate that the ha-maintenance-start command
  handler failed while processing the command. The argument provides the reason for
  failure.

**HA_MISSING_CONFIGURATION**

high-availability parameter not specified for High Availability hooks library

  This error message is issued to indicate that the configuration for the
  High Availability hooks library hasn't been specified. The 'high-availability'
  parameter must be specified for the hooks library to load properly.

**HA_PAUSE_CLIENT_LISTENER_FAILED**

Pausing multi-threaded HTTP processing failed: %1

  This error message is emitted when attempting to pause HA's HTTP client and
  listener threads. This error is highly unlikely and indicates a programmatic
  issue that should be reported as a defect.

**HA_PAUSE_CLIENT_LISTENER_ILLEGAL**

Pausing multi-threaded HTTP processing failed: %1

  This error message is emitted when attempting to pause HA's HTTP client or
  listener thread pools from a worker thread. This error indicates that a command
  run on the listener threads is trying to use a critical section which would
  result in a dead-lock.

**HA_RESET_COMMUNICATIONS_FAILED**

failed to send ha-reset command to %1: %2

  This warning message indicates a problem with communication with a HA peer
  while sending the ha-reset command. The first argument specifies a remote
  server name. The second argument specifies a reason for failure.

**HA_RESET_FAILED**

failed to reset HA state machine of %1: %2

  This warning message indicates that a peer returned an error status code
  in response to the ha-reset command.  The first argument specifies a
  remote server name. The second argument specifies a reason for failure.

**HA_RESET_HANDLER_FAILED**

ha-reset command failed: %1

  This error message is issued to indicate that the ha-reset command handler
  failed while processing the command. The argument provides the reason for
  failure.

**HA_RESUME_CLIENT_LISTENER_FAILED**

Resuming multi-threaded HTTP processing failed: %1

  This error message is emitted when attempting to resume HA's HTTP client and
  listener threads. This error is highly unlikely and indicates a programmatic
  issue that should be reported as a defect.

**HA_SCOPES_HANDLER_FAILED**

ha-scopes command failed: %1

  This error message is issued to indicate that the ha-scopes command handler
  failed while processing the command. The argument provides reason for
  the failure.

**HA_SERVICE_STARTED**

started high availability service in %1 mode as %2 server

  This informational message is issued when the HA service is started as a result
  of server startup or reconfiguration. The first argument provides the HA mode.
  The second argument specifies the role of this server instance in this
  configuration.

**HA_STATE_MACHINE_CONTINUED**

state machine is un-paused

  This informational message is issued when the HA state machine is un-paused.
  This unlocks the server from the current state. It may transition to any
  other state if it needs to do so, e.g. 'partner-down' if its partner appears
  to be offline. The server may also remain in the current state if the HA
  setup state warrants such behavior.

**HA_STATE_MACHINE_PAUSED**

state machine paused in state %1

  This informational message is issued when the HA state machine is paused.
  HA state machine may be paused in certain states specified in the HA hooks library
  configuration. When the state machine is paused, the server remains in the given
  state until it is explicitly unpaused (via the ha-continue command). If the state
  machine is paused, the server operates normally but cannot transition to any
  other state.

**HA_STATE_TRANSITION**

server transitions from %1 to %2 state, partner state is %3

  This informational message is issued when the server transitions to a new
  state as a result of some interaction (or lack of thereof) with its partner.
  The arguments specify initial server state, new server state and the partner's
  state.

**HA_STATE_TRANSITION_PASSIVE_BACKUP**

server transitions from %1 to %2 state

  This informational message is issued when the server in passive-backup
  mode transitions to a new state. The arguments specify initial server state and
  a new server state.

**HA_SYNC_COMPLETE_NOTIFY_COMMUNICATIONS_FAILED**

failed to send ha-sync-complete-notify to %1: %2

  This warning message indicates that there was a problem in communication with an
  HA peer while sending the ha-sync-complete-notify command. The first argument
  provides the remote server's name. The second argument provides a reason for
  failure.

**HA_SYNC_COMPLETE_NOTIFY_FAILED**

error processing ha-sync-complete-notify command on %1: %2

  This warning message indicates that a peer returned an error status code
  in response to the ha-sync-complete-notify command.  The first argument provides
  the remote server's name. The second argument provides a reason for failure.

**HA_SYNC_COMPLETE_NOTIFY_HANDLER_FAILED**

ha-sync-complete-notify command failed: %1

  This error message is issued to indicate that the ha-sync-complete-notify command
  handler failed while processing the command. The argument provides the reason for
  failure.

**HA_SYNC_FAILED**

lease database synchronization with %1 failed: %2

  This error message is issued to indicate that the lease database synchronization
  failed. The first argument provides the partner server's name. The second argument
  provides a reason for the failure.

**HA_SYNC_HANDLER_FAILED**

ha-sync command failed: %1

  This error message is issued to indicate that the ha-sync command handler
  failed while processing the command. The argument provides the reason for
  failure.

**HA_SYNC_START**

starting lease database synchronization with %1

  This informational message is issued when the server starts lease database
  synchronization with a partner. The name of the partner is specified with the
  sole argument.

**HA_SYNC_SUCCESSFUL**

lease database synchronization with %1 completed successfully in %2

  This informational message is issued when the server successfully completed
  lease database synchronization with the partner. The first argument specifies
  the name of the partner server. The second argument specifies the duration of
  the synchronization.

**HA_TERMINATED**

HA service terminated due to an unrecoverable condition. Check previous error message(s), address the problem and restart!

  This error message is issued to indicate that the HA service has been stopped
  due to an unacceptable condition (e.g. too large of a clock skew). The exact
  cause should appear in a previous error message.  Address the condition
  reported then restart the servers to resume service.

HOOKS
~~~~~

**HOOKS_ALL_CALLOUTS_DEREGISTERED**

hook library at index %1 removed all callouts on hook %2

  A debug message issued when all callouts on the specified hook registered
  by the library with the given index were removed.  This is similar to
  the HOOKS_CALLOUTS_REMOVED message (and the two are likely to be seen
  together), but is issued at a lower-level in the hook framework.

**HOOKS_CALLOUTS_BEGIN**

begin all callouts for hook %1

  This debug message is issued when callout manager begins to invoke callouts
  for the hook. The argument specifies the hook name.

**HOOKS_CALLOUTS_COMPLETE**

completed callouts for hook %1 (total callouts duration: %2)

  This debug message is issued when callout manager has completed execution
  of all callouts for the particular hook. The arguments specify the hook
  name and total execution time for all callouts in milliseconds.

**HOOKS_CALLOUTS_REMOVED**

callouts removed from hook %1 for library %2

  This is a debug message issued during library unloading.  It notes that
  one of more callouts registered by that library have been removed from
  the specified hook.  This is similar to the HOOKS_DEREGISTER_ALL_CALLOUTS
  message (and the two are likely to be seen together), but is issued at a
  higher-level in the hook framework.

**HOOKS_CALLOUT_CALLED**

hooks library with index %1 has called a callout on hook %2 that has address %3 (callout duration: %4)

  Only output at a high debugging level, this message indicates that
  a callout on the named hook registered by the library with the given
  index (in the list of loaded libraries) has been called and returned a
  success state.  The address of the callout is given in the message.
  The message includes the callout execution time in milliseconds.

**HOOKS_CALLOUT_DEREGISTERED**

hook library at index %1 deregistered a callout on hook %2

  A debug message issued when all instances of a particular callouts on
  the hook identified in the message that were registered by the library
  with the given index have been removed.

**HOOKS_CALLOUT_ERROR**

error returned by callout on hook %1 registered by library with index %2 (callout address %3) (callout duration %4)

  If a callout returns an error status when called, this error message
  is issued.  It identifies the hook to which the callout is attached, the
  index of the library (in the list of loaded libraries) that registered
  it and the address of the callout.  The error is otherwise ignored.
  The error message includes the callout execution time in milliseconds.

**HOOKS_CALLOUT_EXCEPTION**

exception thrown by callout on hook %1 registered by library with index %2 (callout address %3): %4 (callout duration: %5)

  If a callout throws an exception when called, this error message is
  issued.  It identifies the hook to which the callout is attached, the
  index of the library (in the list of loaded libraries) that registered
  it and the address of the callout.  The error is otherwise ignored.
  The error message includes the callout execution time in milliseconds.

**HOOKS_CALLOUT_REGISTRATION**

hooks library with index %1 registering callout for hook '%2'

  This is a debug message, output when a library (whose index in the list
  of libraries (being) loaded is given) registers a callout.

**HOOKS_CLOSE_ERROR**

failed to close hook library %1: %2

  Kea has failed to close the named hook library for the stated reason.
  Although this is an error, this should not affect the running system
  other than as a loss of resources.  If this error persists, you should
  restart Kea.

**HOOKS_HOOK_LIST_RESET**

the list of hooks has been reset

  This is a message indicating that the list of hooks has been reset.
  While this is usual when running the Kea test suite, it should not be
  seen when running Kea in a production environment.  If this appears,
  please report a bug through the usual channels.

**HOOKS_INCORRECT_VERSION**

hook library %1 is at version %2, require version %3

  Kea has detected that the named hook library has been built against
  a version of Kea that is incompatible with the version of Kea
  running on your system.  It has not loaded the library.
  This is most likely due to the installation of a new version of Kea
  without rebuilding the hook library.  A rebuild and re-install of the
  library should fix the problem in most cases.

**HOOKS_LIBRARY_CLOSED**

hooks library %1 successfully closed

  This information message is issued when a user-supplied hooks library
  has been successfully closed.

**HOOKS_LIBRARY_LOADED**

hooks library %1 successfully loaded

  This information message is issued when a user-supplied hooks library
  has been successfully loaded.

**HOOKS_LIBRARY_LOADING**

loading hooks library %1

  This is a debug message output just before the specified library is loaded.
  If the action is successfully, it will be followed by the
  HOOKS_LIBRARY_LOADED informational message.

**HOOKS_LIBRARY_MULTI_THREADING_COMPATIBLE**

hooks library %1 reports its multi-threading compatibility as %2

  A debug message issued when the "multi_threading_compatible" function was
  called. The returned value (0 means not compatible, others compatible)
  is displayed.

**HOOKS_LIBRARY_MULTI_THREADING_NOT_COMPATIBLE**

hooks library %1 is not compatible with multi-threading

  When multi-threading is enabled and the library is not compatible (either
  because the "multi_threading_compatible" function returned 0 or was not
  implemented) this error message is issued. The library must be removed
  from the configuration or the multi-threading disabled.

**HOOKS_LIBRARY_UNLOADED**

hooks library %1 successfully unloaded

  This information message is issued when a user-supplied hooks library
  has been successfully unloaded.

**HOOKS_LIBRARY_UNLOADING**

unloading library %1

  This is a debug message called when the specified library is
  being unloaded.  If all is successful, it will be followed by the
  HOOKS_LIBRARY_UNLOADED informational message.

**HOOKS_LIBRARY_VERSION**

hooks library %1 reports its version as %2

  A debug  message issued when the version check on the hooks library
  has succeeded.

**HOOKS_LOAD_ERROR**

'load' function in hook library %1 returned error %2

  A "load" function was found in the library named in the message and
  was called.  The function returned a non-zero status (also given in
  the message) which was interpreted as an error.  The library has been
  unloaded and no callouts from it will be installed.

**HOOKS_LOAD_EXCEPTION**

'load' function in hook library %1 threw an exception

  A "load" function was found in the library named in the message and
  was called.  The function threw an exception (an error indication)
  during execution, which is an error condition.  The library has been
  unloaded and no callouts from it will be installed.

**HOOKS_LOAD_FRAMEWORK_EXCEPTION**

'load' function in hook library %1 threw an exception: reason %2

  A "load" function was found in the library named in the message and
  was called.  Either the hooks framework or the function threw an
  exception (an error indication) during execution, which is an error
  condition; the cause of the exception is recorded in the message.
  The library has been unloaded and no callouts from it will be
  installed.

**HOOKS_LOAD_SUCCESS**

'load' function in hook library %1 returned success

  This is a debug message issued when the "load" function has been found
  in a hook library and has been successfully called.

**HOOKS_MULTI_THREADING_COMPATIBLE_EXCEPTION**

'multi_threading_compatible' function in hook library %1 threw an exception

  This error message is issued if the multi_threading_compatible()
  function in the specified hooks library was called and generated an
  exception.  The library is considered unusable and will not be loaded.

**HOOKS_NO_LOAD**

no 'load' function found in hook library %1

  This is a debug message saying that the specified library was loaded
  but no function called "load" was found in it.  Providing the library
  contained some "standard" functions (i.e. functions with the names of
  the hooks for the given server), this is not an issue.

**HOOKS_NO_UNLOAD**

no 'unload' function found in hook library %1

  This is a debug message issued when the library is being unloaded.
  It merely states that the library did not contain an "unload" function.

**HOOKS_NO_VERSION**

no 'version' function found in hook library %1

  The shared library named in the message was found and successfully loaded,
  but Kea did not find a function named "version" in it.  This function
  is required and should return the version of Kea against which the
  library was built.  The value is used to check that the library was built
  against a compatible version of Kea.  The library has not been loaded.

**HOOKS_OPEN_ERROR**

failed to open hook library %1: %2

  Kea failed to open the specified hook library for the stated
  reason. The library has not been loaded.  Kea will continue to
  function, but without the services offered by the library.

**HOOKS_STD_CALLOUT_REGISTERED**

hooks library %1 registered standard callout for hook %2 at address %3

  This is a debug message, output when the library loading function has
  located a standard callout (a callout with the same name as a hook point)
  and registered it.  The address of the callout is indicated.

**HOOKS_UNLOAD_ERROR**

'unload' function in hook library %1 returned error %2

  During the unloading of a library, an "unload" function was found.
  It was called, but returned an error (non-zero) status, resulting in
  the issuing of this message.  The unload process continued after this
  message and the library has been unloaded.

**HOOKS_UNLOAD_EXCEPTION**

'unload' function in hook library %1 threw an exception

  During the unloading of a library, an "unload" function was found.  It was
  called, but in the process generated an exception (an error indication).
  The unload process continued after this message and the library has
  been unloaded.

**HOOKS_UNLOAD_FRAMEWORK_EXCEPTION**

'unload' function in hook library %1 threw an exception, reason %2

  During the unloading of a library, an "unload" function was found.
  It was called, but in the process either it or the hooks framework
  generated an exception (an error indication); the cause of the error
  is recorded in the message.  The unload process continued after
  this message and the library has been unloaded.

**HOOKS_UNLOAD_SUCCESS**

'unload' function in hook library %1 returned success

  This is a debug message issued when an "unload" function has been found
  in a hook library during the unload process, called, and returned success.

HOSTS
~~~~~

**HOSTS_BACKENDS_REGISTERED**

the following host backend types are available: %1

  This informational message lists all possible host backends that could
  be used in hosts-database[s].

**HOSTS_BACKEND_DEREGISTER**

deregistered host backend type: %1

  This debug message is issued when a backend factory was deregistered.
  It is no longer possible to use host backend of this type.

**HOSTS_BACKEND_REGISTER**

registered host backend type: %1

  This debug message is issued when a backend factory was successfully
  registered. It is now possible to use host backend of this type.

**HOSTS_CFG_ADD_HOST**

add the host for reservations: %1

  This debug message is issued when new host (with reservations) is added to
  the server's configuration. The argument describes the host and its
  reservations in detail.

**HOSTS_CFG_CACHE_HOST_DATA_SOURCE**

get host cache data source: %1

  This informational message is issued when a host cache data source is
  detected by the host manager.

**HOSTS_CFG_CLOSE_HOST_DATA_SOURCE**

Closing host data source: %1

  This is a normal message being printed when the server closes host data
  source connection.

**HOSTS_CFG_DEL_ALL_SUBNET4**

deleted all %1 host(s) for subnet id %2

  This debug message is issued when all IPv4 reservations are deleted for
  the specified subnet. The first argument specifies how many reservations
  have been deleted. The second argument is the subnet identifier.

**HOSTS_CFG_DEL_ALL_SUBNET6**

deleted all %1 host(s) having %2 IPv6 reservation(s) for subnet id %3

  This debug message is issued when all IPv6 reservations are deleted for
  the specified subnet. The first argument specifies how many hosts
  have been deleted. The second argument specifies how many IPv6
  (addresses and prefixes) have been deleted. The third argument is the
  subnet identifier.

**HOSTS_CFG_GET_ALL**

get all hosts with reservations

  This debug message is issued when starting to retrieve all hosts.

**HOSTS_CFG_GET_ALL_ADDRESS4**

get all hosts with reservations for IPv4 address %1

  This debug message is issued when starting to retrieve all hosts, holding the
  reservation for the specific IPv4 address, from the configuration. The
  argument specifies the IPv4 address used to search the hosts.

**HOSTS_CFG_GET_ALL_ADDRESS4_COUNT**

using address %1, found %2 host(s)

  This debug message logs the number of hosts found using the specified
  IPv4 address. The arguments specify the IPv4 address used and the number
  of hosts found respectively.

**HOSTS_CFG_GET_ALL_ADDRESS4_HOST**

using address %1 found host: %2

  This debug message is issued when found host with the reservation
  for the specified IPv4 address. The arguments specify the IPv4 address
  and the detailed description of the host found.

**HOSTS_CFG_GET_ALL_ADDRESS6**

get all hosts with reservations for IPv6 address %1

  This debug message is issued when starting to retrieve all hosts, holding the
  reservation for the specific IPv6 address, from the configuration.
  The argument specifies the IPv6 address used to search the hosts.

**HOSTS_CFG_GET_ALL_ADDRESS6_COUNT**

using address %1, found %2 host(s)

  This debug message logs the number of hosts found using the specified
  IPv6 address. The arguments specify the IPv6 address used and the number
  of hosts found respectively.

**HOSTS_CFG_GET_ALL_ADDRESS6_HOST**

using address %1 found host: %2

  This debug message is issued when found host with the reservation
  for the specified IPv6 address. The arguments specify the IPv6 address
  and the detailed description of the host found.

**HOSTS_CFG_GET_ALL_COUNT**

found %1 host(s)

  This debug message include the details of the host found. The argument
  specifies the number of hosts found.

**HOSTS_CFG_GET_ALL_HOST**

found host: %1

  This debug message includes the details of the host found. The argument
  specifies found host details.

**HOSTS_CFG_GET_ALL_HOSTNAME**

get all hosts with reservations for hostname %1

  This debug message is issued when starting to retrieve all hosts with
  the specific hostname. The argument specifies hostname.

**HOSTS_CFG_GET_ALL_HOSTNAME_COUNT**

using hostname %1, found %2 host(s)

  This debug message include the details of the host found using the
  hostname. The arguments specify hostname and the number of hosts found
  respectively.

**HOSTS_CFG_GET_ALL_HOSTNAME_HOST**

using hostname %1, found host: %2

  This debug message includes the details of the host found using the hostname.
  The arguments specify hostname and found host details respectively.

**HOSTS_CFG_GET_ALL_HOSTNAME_SUBNET_ID4**

get all hosts with reservations for hostname %1 and IPv4 subnet %2

  This debug message is issued when starting to retrieve all hosts with
  the specific hostname connected to the specific DHCPv4 subnet. The argument
  specifies hostname and subnet id.

**HOSTS_CFG_GET_ALL_HOSTNAME_SUBNET_ID4_COUNT**

using hostname %1 and IPv4 subnet %2, found %3 host(s)

  This debug message include the details of the host found using the
  hostname and the DHCPv4 subnet id. The arguments specify hostname,
  subnet id and the number of hosts found respectively.

**HOSTS_CFG_GET_ALL_HOSTNAME_SUBNET_ID4_HOST**

using hostname %1 and IPv4 subnet %2, found host: %3

  This debug message includes the details of the host found using the
  hostname and the DHCPv4 subnet id. The arguments specify hostname,
  subnet id and found host details respectively.

**HOSTS_CFG_GET_ALL_HOSTNAME_SUBNET_ID6**

get all hosts with reservations for hostname %1 and IPv6 subnet %2

  This debug message is issued when starting to retrieve all hosts with
  the specific hostname connected to the specific DHCPv6 subnet. The argument
  specifies hostname and subnet id.

**HOSTS_CFG_GET_ALL_HOSTNAME_SUBNET_ID6_COUNT**

using hostname %1 and IPv6 subnet %2, found %3 host(s)

  This debug message include the details of the host found using the
  hostname and the DHCPv6 subnet id. The arguments specify hostname,
  subnet id and the number of hosts found respectively.

**HOSTS_CFG_GET_ALL_HOSTNAME_SUBNET_ID6_HOST**

using hostname %1 and IPv6 subnet %2, found host: %3

  This debug message includes the details of the host found using the
  hostname and the DHCPv6 subnet id. The arguments specify hostname,
  subnet id and found host details respectively.

**HOSTS_CFG_GET_ALL_IDENTIFIER**

get all hosts with reservations using identifier: %1

  This debug message is issued when starting to retrieve reservations for all hosts
  identified by HW address or DUID. The argument holds both the identifier
  type and the value.

**HOSTS_CFG_GET_ALL_IDENTIFIER_COUNT**

using identifier %1, found %2 host(s)

  This debug message logs the number of hosts found using the specified
  identifier. The arguments specify the identifier used and the number
  of hosts found respectively.

**HOSTS_CFG_GET_ALL_IDENTIFIER_HOST**

using identifier: %1, found host: %2

  This debug message is issued when found host identified by the specific
  identifier. The arguments specify the identifier and the detailed
  description of the host found.

**HOSTS_CFG_GET_ALL_SUBNET_ID4**

get all hosts with reservations for IPv4 subnet %1

  This debug message is issued when starting to retrieve all hosts connected to
  the specific DHCPv4 subnet. The argument specifies subnet id.

**HOSTS_CFG_GET_ALL_SUBNET_ID4_COUNT**

using IPv4 subnet %1, found %2 host(s)

  This debug message include the details of the host found using the DHCPv4
  subnet id. The arguments specify subnet id and the number of hosts found
  respectively.

**HOSTS_CFG_GET_ALL_SUBNET_ID4_HOST**

using IPv4 subnet %1, found host: %2

  This debug message includes the details of the host found using the DHCPv4
  subnet id. The arguments specify subnet id and found host details respectively.

**HOSTS_CFG_GET_ALL_SUBNET_ID6**

get all hosts with reservations for IPv6 subnet %1

  This debug message is issued when starting to retrieve all hosts connected to
  the specific DHCPv6 subnet. The argument specifies subnet id.

**HOSTS_CFG_GET_ALL_SUBNET_ID6_COUNT**

using IPv6 subnet %1, found %2 host(s)

  This debug message include the details of the host found using the DHCPv6
  subnet id. The arguments specify subnet id and the number of hosts found
  respectively.

**HOSTS_CFG_GET_ALL_SUBNET_ID6_HOST**

using IPv6 subnet %1, found host: %2

  This debug message includes the details of the host found using the DHCPv6
  subnet id. The arguments specify subnet id and found host details respectively.

**HOSTS_CFG_GET_ALL_SUBNET_ID_ADDRESS4**

get all hosts with reservations for subnet id %1 and IPv4 address %2

  This debug message is issued when starting to retrieve all hosts having
  the reservation for the given IPv4 address within the given subnet. The
  first argument specifies subnet identifier. The second argument specifies
  the IPv4 address for which the reservation is to be returned.

**HOSTS_CFG_GET_ALL_SUBNET_ID_ADDRESS4_COUNT**

using IPv4 subnet %1 and IPv4 address %2, found %3 host(s)

  This debug message logs the number of hosts found having the reservation
  for the specified IPv4 address within the specified subnet. The first
  argument specifies the subnet identifier. The second argument specifies
  the reserved IPv4 address. The third argument specifies the number of
  hosts found.

**HOSTS_CFG_GET_ALL_SUBNET_ID_ADDRESS4_HOST**

using IPv4 subnet %1 and IPv4 address %2, found host: %3

  This debug message is issued when found host having the reservation for
  the specified IPv4 address in the specified subnet.  The first argument
  specifies the subnet identifier. The second argument specifies the reserved
  IPv4 address. The third argument specifies host details.

**HOSTS_CFG_GET_ALL_SUBNET_ID_ADDRESS6**

get all hosts with reservations for subnet id %1 and IPv6 address %2

  This debug message is issued when starting to retrieve all hosts connected to
  the specific subnet and having the specific IPv6 address reserved.
  The arguments specify subnet id and IPv6 address respectively.

**HOSTS_CFG_GET_ALL_SUBNET_ID_ADDRESS6_COUNT**

using subnet id %1 and address %2, found %3 host(s)

  This debug message include the details of the host found using the
  subnet id and address. The arguments specify subnet id, address and
  the number of hosts found respectively.

**HOSTS_CFG_GET_ALL_SUBNET_ID_ADDRESS6_HOST**

using subnet id %1 and address %2, found host: %3

  This debug message includes the details of the host found using the
  subnet id and address. The arguments specify subnet id, address and
  the number of hosts found respectively.
  found host details respectively.

**HOSTS_CFG_GET_ONE_PREFIX**

get one host with reservation for prefix %1/%2

  This debug message is issued when starting to retrieve a host having a
  reservation for a specified prefix. The arguments specify a prefix and
  prefix length.

**HOSTS_CFG_GET_ONE_PREFIX_HOST**

using prefix %1/%2, found host: %3

  This debug message includes the details of the host found using the
  specific prefix/prefix length. The arguments specify prefix, prefix
  length and host details respectively.

**HOSTS_CFG_GET_ONE_PREFIX_NULL**

host not found using prefix %1/%2

  This debug message is issued when no host was found for a specified
  prefix and prefix length.

**HOSTS_CFG_GET_ONE_SUBNET_ID_ADDRESS4**

get one host with reservation for subnet id %1 and IPv4 address %2

  This debug message is issued when starting to retrieve a host connected to the
  specific subnet and having the specific IPv4 address reserved. The
  arguments specify subnet id and IPv4 address respectively.

**HOSTS_CFG_GET_ONE_SUBNET_ID_ADDRESS4_HOST**

using subnet id %1 and address %2, found host: %3

  This debug message logs the details of the host found using the
  subnet id and IPv4 address.

**HOSTS_CFG_GET_ONE_SUBNET_ID_ADDRESS4_NULL**

host not found using subnet id %1 and address %2

  This debug message is issued when no host was found for the specified
  subnet id and IPv4 address.

**HOSTS_CFG_GET_ONE_SUBNET_ID_ADDRESS6**

get one host with reservation for subnet id %1 and having IPv6 address %2

  This debug message is issued when starting to retrieve a host connected to the
  specific subnet and having the specific IPv6 address reserved. The
  arguments specify subnet id and IPv6 address respectively.

**HOSTS_CFG_GET_ONE_SUBNET_ID_ADDRESS6_HOST**

using subnet id %1 and address %2, found host: %3

  This debug message logs the details of the host found using the
  subnet id and IPv6 address.

**HOSTS_CFG_GET_ONE_SUBNET_ID_ADDRESS6_NULL**

host not found using subnet id %1 and address %2

  This debug message is issued when no host was found using the specified
  subnet if and IPv6 address.

**HOSTS_CFG_GET_ONE_SUBNET_ID_IDENTIFIER**

get one host with %1 reservation for subnet id %2, identified by %3

  This debug message is issued when starting to retrieve a host holding
  IPv4 or IPv6 reservations, which is connected to a specific subnet and
  is identified by a specific unique identifier. The first argument
  identifies if the IPv4 or IPv6 reservation is desired.

**HOSTS_CFG_GET_ONE_SUBNET_ID_IDENTIFIER_HOST**

using subnet id %1 and identifier %2, found host: %3

  This debug message includes the details of a host found using a
  subnet id and specific host identifier.

**HOSTS_CFG_GET_ONE_SUBNET_ID_IDENTIFIER_NULL**

host not found using subnet id %1 and identifier %2

  This debug message is issued when no host was found using the specified
  subnet id and host identifier.

**HOSTS_MGR_ALTERNATE_GET4_SUBNET_ID_ADDRESS4**

trying alternate sources for host using subnet id %1 and address %2

  This debug message is issued when the Host Manager doesn't find the
  host connected to the specific subnet and having the reservation for
  the specific IPv4 address, and it is starting to search for this host
  in alternate host data sources.

**HOSTS_MGR_ALTERNATE_GET4_SUBNET_ID_IDENTIFIER**

get one host with IPv4 reservation for subnet id %1, identified by %2

  This debug message is issued when starting to retrieve a host holding
  IPv4 reservation, which is connected to a specific subnet and
  is identified by a specific unique identifier.

**HOSTS_MGR_ALTERNATE_GET4_SUBNET_ID_IDENTIFIER_HOST**

using subnet id %1 and identifier %2, found in %3 host: %4

  This debug message includes the details of a host returned by an
  alternate hosts data source using a subnet id and specific host
  identifier.

**HOSTS_MGR_ALTERNATE_GET4_SUBNET_ID_IDENTIFIER_NULL**

host not found using subnet id %1 and identifier %2

  This debug message is issued when no host was found using the specified
  subnet id and host identifier.

**HOSTS_MGR_ALTERNATE_GET6_PREFIX**

trying alternate sources for host using prefix %1/%2

  This debug message is issued when the Host Manager doesn't find the
  host connected to the specific subnet and having the reservation for
  the specified prefix, and it is starting to search for this host in
  alternate host data sources.

**HOSTS_MGR_ALTERNATE_GET6_SUBNET_ID_ADDRESS6**

trying alternate sources for host using subnet id %1 and IPv6 address %2

  This debug message is issued when the Host Manager doesn't find the
  host connected to the specific subnet and having the reservation for
  the specified IPv6 address, and it is starting to search for this
  host in alternate host data sources.

**HOSTS_MGR_ALTERNATE_GET6_SUBNET_ID_IDENTIFIER**

get one host with IPv6 reservation for subnet id %1, identified by %2

  This debug message is issued when starting to retrieve a host holding
  IPv4 reservation, which is connected to a specific subnet and
  is identified by a specific unique identifier.

**HOSTS_MGR_ALTERNATE_GET6_SUBNET_ID_IDENTIFIER_HOST**

using subnet id %1 and identifier %2, found in %3 host: %4

  This debug message includes the details of a host returned by an
  alternate host data source using a subnet id and specific host
  identifier.

**HOSTS_MGR_ALTERNATE_GET6_SUBNET_ID_IDENTIFIER_NULL**

host not found using subnet id %1 and identifier %2

  This debug message is issued when no host was found using the specified
  subnet id and host identifier.

**HOSTS_MGR_ALTERNATE_GET_ALL_SUBNET_ID_ADDRESS4**

trying alternate sources for hosts using subnet id %1 and address %2

  This debug message is issued when the Host Manager is starting to search
  for hosts in alternate host data sources by subnet ID and IPv4 address.

**HOSTS_MGR_ALTERNATE_GET_ALL_SUBNET_ID_ADDRESS6**

trying alternate sources for hosts using subnet id %1 and address %2

  This debug message is issued when the Host Manager is starting to search
  for hosts in alternate host data sources by subnet ID and IPv6 address.

HTTPS
~~~~~

**HTTPS_REQUEST_RECEIVE_START**

start receiving request from %1

  This debug message is issued when the server starts receiving new request
  over the established connection. The argument specifies the address
  of the remote endpoint.

HTTP
~~~~

**HTTP_BAD_CLIENT_REQUEST_RECEIVED**

bad request received from %1: %2

  This debug message is issued when an HTTP client sends malformed request to
  the server. This includes HTTP requests using unexpected content types,
  including malformed JSON etc. The first argument specifies an address of
  the remote endpoint which sent the request. The second argument provides
  a detailed error message.

**HTTP_BAD_CLIENT_REQUEST_RECEIVED_DETAILS**

detailed information about bad request received from %1:\n%2

  This debug message is issued when an HTTP client sends malformed request to
  the server. It includes detailed information about the received request
  rejected by the server. The first argument specifies an address of
  the remote endpoint which sent the request. The second argument provides
  a request in the textual format. The request is truncated by the logger
  if it is too large to be printed.

**HTTP_BAD_SERVER_RESPONSE_RECEIVED**

bad response received when communicating with %1: %2

  This debug message is issued when an HTTP client fails to receive a response
  from the server or when this response is malformed. The first argument
  specifies the server URL. The second argument provides a detailed error
  message.

**HTTP_BAD_SERVER_RESPONSE_RECEIVED_DETAILS**

detailed information about bad response received from %1:\n%2

  This debug message is issued when an HTTP client receives malformed response
  from the server. The first argument specifies an URL of the server. The
  second argument provides a response in the textual format. The request is
  truncated by the logger if it is too large to be printed.

**HTTP_CLIENT_MT_STARTED**

HttpClient has been started in multi-threaded mode running %1 threads

  This debug message is issued when a multi-threaded HTTP client instance has
  been created.  The argument specifies the maximum number of threads.

**HTTP_CLIENT_QUEUE_SIZE_GROWING**

queue for URL: %1, now has %2 entries and may be growing too quickly

  This warning message is issued when the queue of pending requests for the
  given URL appears to be growing more quickly than the requests can be handled.
  It will be emitted periodically as long as the queue size continues to grow.
  This may occur with a surge of client traffic creating a momentary backlog
  which then subsides as the surge subsides.  If it happens continually then
  it most likely indicates a deployment configuration that cannot sustain the
  client load.

**HTTP_CLIENT_REQUEST_AUTHORIZED**

received HTTP request authorized for '%1'

  This information message is issued when the server receives with a matching
  authentication header. The argument provides the user id.

**HTTP_CLIENT_REQUEST_BAD_AUTH_HEADER**

received HTTP request with malformed authentication header: %1

  This information message is issued when the server receives a request with
  a malformed authentication header. The argument explains the problem.

**HTTP_CLIENT_REQUEST_NOT_AUTHORIZED**

received HTTP request with not matching authentication header

  This information message is issued when the server receives a request with
  authentication header carrying not recognized credential: the user
  provided incorrect user id and/or password.

**HTTP_CLIENT_REQUEST_RECEIVED**

received HTTP request from %1

  This debug message is issued when the server finished receiving a HTTP
  request from the remote endpoint. The address of the remote endpoint is
  specified as an argument.

**HTTP_CLIENT_REQUEST_RECEIVED_DETAILS**

detailed information about well-formed request received from %1:\n%2

  This debug message is issued when the HTTP server receives a well-formed
  request. It includes detailed information about the received request. The
  first argument specifies an address of the remote endpoint which sent the
  request. The second argument provides the request in the textual format.
  The request is truncated by the logger if it is too large to be printed.

**HTTP_CLIENT_REQUEST_SEND**

sending HTTP request %1 to %2

  This debug message is issued when the client is starting to send a HTTP
  request to a server. The first argument holds basic information
  about the request (HTTP version number and status code). The second
  argument specifies a URL of the server.

**HTTP_CLIENT_REQUEST_SEND_DETAILS**

detailed information about request sent to %1:\n%2

  This debug message is issued right before the client sends an HTTP request
  to the server. It includes detailed information about the request. The
  first argument specifies an URL of the server to which the request is
  being sent. The second argument provides the request in the textual form.
  The request is truncated by the logger if it is too large to be printed.

**HTTP_CLIENT_REQUEST_TIMEOUT_OCCURRED**

HTTP request timeout occurred when communicating with %1

  This debug message is issued when the HTTP request timeout has occurred and
  the server is going to send a response with Http Request timeout status
  code.

**HTTP_CONNECTION_CLOSE_CALLBACK_FAILED**

Connection close callback threw an exception

  This is an error message emitted when the close connection callback
  registered on the connection failed unexpectedly.  This is a programmatic
  error that should be submitted as a bug.

**HTTP_CONNECTION_HANDSHAKE_FAILED**

TLS handshake with %1 failed with %2

  This information message is issued when the TLS handshake failed at the
  server side. The client address and the error message are displayed.

**HTTP_CONNECTION_HANDSHAKE_START**

start TLS handshake with %1 with timeout %2

  This debug message is issued when the server starts the TLS handshake
  with the remote endpoint. The first argument specifies the address
  of the remote endpoint. The second argument specifies request timeout in
  seconds.

**HTTP_CONNECTION_SHUTDOWN**

shutting down HTTP connection from %1

  This debug message is issued when one of the HTTP connections is shut down.
  The connection can be stopped as a result of an error or after the
  successful message exchange with a client.

**HTTP_CONNECTION_SHUTDOWN_FAILED**

shutting down HTTP connection failed

  This error message is issued when an error occurred during shutting down
  a HTTP connection with a client.

**HTTP_CONNECTION_STOP**

stopping HTTP connection from %1

  This debug message is issued when one of the HTTP connections is stopped.
  The connection can be stopped as a result of an error or after the
  successful message exchange with a client.

**HTTP_CONNECTION_STOP_FAILED**

stopping HTTP connection failed

  This error message is issued when an error occurred during closing a
  HTTP connection with a client.

**HTTP_DATA_RECEIVED**

received %1 bytes from %2

  This debug message is issued when the server receives a chunk of data from
  the remote endpoint. This may include the whole request or only a part
  of the request. The first argument specifies the amount of received data.
  The second argument specifies an address of the remote endpoint which
  produced the data.

**HTTP_IDLE_CONNECTION_TIMEOUT_OCCURRED**

closing persistent connection with %1 as a result of a timeout

  This debug message is issued when the persistent HTTP connection is being
  closed as a result of being idle.

**HTTP_PREMATURE_CONNECTION_TIMEOUT_OCCURRED**

premature connection timeout occurred: in transaction ? %1, transid: %2, current_transid: %3

  This warning message is issued when unexpected timeout occurred during the
  transaction. This is proven to occur when the system clock is moved manually
  or as a result of synchronization with a time server. Any ongoing transactions
  will be interrupted. New transactions should be conducted normally.

**HTTP_REQUEST_RECEIVE_START**

start receiving request from %1 with timeout %2

  This debug message is issued when the server starts receiving new request
  over the established connection. The first argument specifies the address
  of the remote endpoint. The second argument specifies request timeout in
  seconds.

**HTTP_SERVER_RESPONSE_RECEIVED**

received HTTP response from %1

  This debug message is issued when the client finished receiving an HTTP
  response from the server. The URL of the server is specified as an argument.

**HTTP_SERVER_RESPONSE_RECEIVED_DETAILS**

detailed information about well-formed response received from %1:\n%2

  This debug message is issued when the HTTP client receives a well-formed
  response from the server. It includes detailed information about the
  received response. The first argument specifies a URL of the server which
  sent the response. The second argument provides the response in the textual
  format. The response is truncated by the logger if it is too large to
  be printed.

**HTTP_SERVER_RESPONSE_SEND**

sending HTTP response %1 to %2

  This debug message is issued when the server is starting to send a HTTP
  response to a remote endpoint. The first argument holds basic information
  about the response (HTTP version number and status code). The second
  argument specifies an address of the remote endpoint.

LEASE
~~~~~

**LEASE_CMDS_ADD4**

lease4-add command successful (parameters: %1)

  The lease4-add command has been successful. Parameters of the host
  added are logged.

**LEASE_CMDS_ADD4_FAILED**

lease4-add command failed (parameters: %1, reason: %2)

  The lease4-add command has failed. Both the reason as well as the
  parameters passed are logged.

**LEASE_CMDS_ADD6**

lease6-add command successful (parameters: %1)

  The lease6-add command has been successful. Parameters of the host
  added are logged.

**LEASE_CMDS_ADD6_FAILED**

Lease6-add command failed (parameters: %1, reason: %2)

  The lease6-add command has failed. Both the reason as well as the
  parameters passed are logged.

**LEASE_CMDS_DEINIT_FAILED**

unloading Lease Commands hooks library failed: %1

  This error message indicates an error during unloading the Lease Commands
  hooks library. The details of the error are provided as argument of
  the log message.

**LEASE_CMDS_DEINIT_OK**

unloading Lease Commands hooks library successful

  This info message indicates that the Lease Commands hooks library has been
  removed successfully.

**LEASE_CMDS_DEL4**

lease4-del command successful (parameters: %1)

  The attempt to delete an IPv4 lease (lease4-del command) has been successful.
  Parameters of the host removed are logged.

**LEASE_CMDS_DEL4_FAILED**

lease4-del command failed (parameters: %1, reason: %2)

  The attempt to delete an IPv4 lease (lease4-del command) has failed. Both the
  reason as well as the parameters passed are logged.

**LEASE_CMDS_DEL6**

lease4-del command successful (parameters: %1)

  The attempt to delete an IPv4 lease (lease4-del command) has been successful.
  Parameters of the host removed are logged.

**LEASE_CMDS_DEL6_FAILED**

lease6-del command failed (parameters: %1, reason: %2)

  The attempt to delete an IPv6 lease (lease4-del command) has failed. Both the
  reason as well as the parameters passed are logged.

**LEASE_CMDS_INIT_FAILED**

loading Lease Commands hooks library failed: %1

  This error message indicates an error during loading the Lease Commands
  hooks library. The details of the error are provided as argument of
  the log message.

**LEASE_CMDS_INIT_OK**

loading Lease Commands hooks library successful

  This info message indicates that the Lease Commands hooks library has been
  loaded successfully. Enjoy!

**LEASE_CMDS_RESEND_DDNS4**

lease4-resend-ddns command successful: %1

  A request to update DNS for the requested IPv4 lease has been
  successfully queued for transmission to kea-dhcp-ddns.

**LEASE_CMDS_RESEND_DDNS4_FAILED**

lease4-resend-ddns command failed: %1

  A request to update DNS for the requested IPv4 lease has failed.  The
  reason for the failure is logged.

**LEASE_CMDS_RESEND_DDNS6**

lease6-resend-ddns command successful: %1

  A request to update DNS for the requested IPv6 lease has been
  successfully queued for transmission to kea-dhcp-ddns.

LFC
~~~

**LFC_FAIL_PID_CREATE**

: %1

  This message is issued if LFC detected a failure when trying
  to create the PID file.  It includes a more specific error string.

**LFC_FAIL_PID_DEL**

: %1

  This message is issued if LFC detected a failure when trying
  to delete the PID file.  It includes a more specific error string.

**LFC_FAIL_PROCESS**

: %1

  This message is issued if LFC detected a failure when trying
  to process the files.  It includes a more specific error string.

**LFC_FAIL_ROTATE**

: %1

  This message is issued if LFC detected a failure when trying
  to rotate the files.  It includes a more specific error string.

**LFC_PROCESSING**

Previous file: %1, copy file: %2

  This message is issued just before LFC starts processing the
  lease files.

**LFC_READ_STATS**

Leases: %1, attempts: %2, errors: %3.

  This message prints out the number of leases that were read, the
  number of attempts to read leases and the number of errors
  encountered while reading.

**LFC_ROTATING**

LFC rotating files

  This message is issued just before LFC starts rotating the
  lease files - removing the old and replacing them with the new.

**LFC_RUNNING**

LFC instance already running

  This message is issued if LFC detects that a previous copy of LFC
  may still be running via the PID check.

**LFC_START**

Starting lease file cleanup

  This message is issued as the LFC process starts.

**LFC_TERMINATE**

LFC finished processing

  This message is issued when the LFC process completes.  It does not
  indicate that the process was successful only that it has finished.

LOGIMPL
~~~~~~~

**LOGIMPL_ABOVE_MAX_DEBUG**

debug level of %1 is too high and will be set to the maximum of %2

  A message from the interface to the underlying logger implementation reporting
  that the debug level (as set by an internally-created string DEBUGn, where n
  is an integer, e.g. DEBUG22) is above the maximum allowed value and has
  been reduced to that value.  The appearance of this message may indicate
  a programming error - please submit a bug report.

**LOGIMPL_BAD_DEBUG_STRING**

debug string '%1' has invalid format

  A message from the interface to the underlying logger implementation
  reporting that an internally-created string used to set the debug level
  is not of the correct format (it should be of the form DEBUGn, where n
  is an integer, e.g. DEBUG22).  The appearance of this message indicates
  a programming error - please submit a bug report.

LOG
~~~

**LOG_BAD_DESTINATION**

unrecognized log destination: %1

  A logger destination value was given that was not recognized. The
  destination should be one of "console", "file", or "syslog".

**LOG_BAD_SEVERITY**

unrecognized log severity: %1

  A logger severity value was given that was not recognized. The severity
  should be one of "DEBUG", "INFO", "WARN", "ERROR", "FATAL" or "NONE".

**LOG_BAD_STREAM**

bad log console output stream: %1

  Logging has been configured so that output is written to the terminal
  (console) but the stream on which it is to be written is not recognized.
  Allowed values are "stdout" and "stderr".

**LOG_DUPLICATE_MESSAGE_ID**

duplicate message ID (%1) in compiled code

  During start-up, Kea detected that the given message identification
  had been defined multiple times in the Kea code.  This indicates a
  programming error; please submit a bug report.

**LOG_DUPLICATE_NAMESPACE**

line %1: duplicate $NAMESPACE directive found

  When reading a message file, more than one $NAMESPACE directive was found.
  (This directive is used to set a C++ namespace when generating header
  files during software development.)  Such a condition is regarded as an
  error and the read will be abandoned.

**LOG_INPUT_OPEN_FAIL**

unable to open message file %1 for input: %2

  The program was not able to open the specified input message file for
  the reason given.

**LOG_INVALID_MESSAGE_ID**

line %1: invalid message identification '%2'

  An invalid message identification (ID) has been found during the read of
  a message file.  Message IDs should comprise only alphanumeric characters
  and the underscore, and should not start with a digit.

**LOG_NAMESPACE_EXTRA_ARGS**

line %1: $NAMESPACE directive has too many arguments

  The $NAMESPACE directive in a message file takes a single argument, a
  namespace in which all the generated symbol names are placed.  This error
  is generated when the compiler finds a $NAMESPACE directive with more
  than one argument.

**LOG_NAMESPACE_INVALID_ARG**

line %1: $NAMESPACE directive has an invalid argument ('%2')

  The $NAMESPACE argument in a message file should be a valid C++ namespace.
  This message is output if the simple check on the syntax of the string
  carried out by the reader fails.

**LOG_NAMESPACE_NO_ARGS**

line %1: no arguments were given to the $NAMESPACE directive

  The $NAMESPACE directive in a message file takes a single argument,
  a C++ namespace in which all the generated symbol names are placed.
  This error is generated when the compiler finds a $NAMESPACE directive
  with no arguments.

**LOG_NO_MESSAGE_ID**

line %1: message definition line found without a message ID

  Within a message file, message are defined by lines starting with a "%".
  The rest of the line should comprise the message ID and text describing
  the message.  This error indicates the message compiler found a line in
  the message file comprising just the "%" and nothing else.

**LOG_NO_MESSAGE_TEXT**

line %1: line found containing a message ID ('%2') and no text

  Within a message file, message are defined by lines starting with a "%".
  The rest of the line should comprise the message ID and text describing
  the message.  This error indicates the message compiler found a line
  in the message file comprising just the "%" and message identification,
  but no text.

**LOG_NO_SUCH_MESSAGE**

could not replace message text for '%1': no such message

  During start-up a local message file was read.  A line with the listed
  message identification was found in the file, but the identification is
  not one contained in the compiled-in message dictionary.  This message
  may appear a number of times in the file, once for every such unknown
  message identification.
  There are several reasons why this message may appear:
  - The message ID has been misspelled in the local message file.
  - The program outputting the message may not use that particular message
  (e.g. it originates in a module not used by the program).
  - The local file was written for an earlier version of the Kea software
  and the later version no longer generates that message.
  Whatever the reason, there is no impact on the operation of Kea.

**LOG_OPEN_OUTPUT_FAIL**

unable to open %1 for output: %2

  Originating within the logging code, the program was not able to open
  the specified output file for the reason given.

**LOG_PREFIX_EXTRA_ARGS**

line %1: $PREFIX directive has too many arguments

  Within a message file, the $PREFIX directive takes a single argument,
  a prefix to be added to the symbol names when a C++ file is created.
  This error is generated when the compiler finds a $PREFIX directive with
  more than one argument.
  Note: the $PREFIX directive is deprecated and will be removed in a future
  version of Kea.

**LOG_PREFIX_INVALID_ARG**

line %1: $PREFIX directive has an invalid argument ('%2')

  Within a message file, the $PREFIX directive takes a single argument,
  a prefix to be added to the symbol names when a C++ file is created.
  As such, it must adhere to restrictions on C++ symbol names (e.g. may
  only contain alphanumeric characters or underscores, and may nor start
  with a digit).  A $PREFIX directive was found with an argument (given
  in the message) that violates those restrictions.
  Note: the $PREFIX directive is deprecated and will be removed in a future
  version of Kea.

**LOG_READING_LOCAL_FILE**

reading local message file %1

  This is an informational message output by Kea when it starts to read
  a local message file.  (A local message file may replace the text of
  one or more messages; the ID of the message will not be changed though.)

**LOG_READ_ERROR**

error reading from message file %1: %2

  The specified error was encountered reading from the named message file.

**LOG_UNRECOGNIZED_DIRECTIVE**

line %1: unrecognized directive '%2'

  Within a message file, a line starting with a dollar symbol was found
  (indicating the presence of a directive) but the first word on the line
  (shown in the message) was not recognized.

MYSQL
~~~~~

**MYSQL_CB_CREATE_UPDATE_BY_POOL_OPTION4**

create or update option pool start: %1 pool end: %2

  Debug message issued when triggered an action to create or update option by pool

**MYSQL_CB_CREATE_UPDATE_BY_POOL_OPTION6**

create or update option pool start: %1 pool end: %2

  Debug message issued when triggered an action to create or update option by pool

**MYSQL_CB_CREATE_UPDATE_BY_PREFIX_OPTION6**

create or update option prefix: %1 prefix len: %2

  Debug message issued when triggered an action to create or update option by prefix

**MYSQL_CB_CREATE_UPDATE_BY_SUBNET_ID_OPTION4**

create or update option by subnet id: %1

  Debug message issued when triggered an action to create or update option by subnet id

**MYSQL_CB_CREATE_UPDATE_BY_SUBNET_ID_OPTION6**

create or update option by subnet id: %1

  Debug message issued when triggered an action to create or update option by subnet id

**MYSQL_CB_CREATE_UPDATE_CLIENT_CLASS4**

create or update client class: %1

  Debug message issued when triggered an action to create or update client class

**MYSQL_CB_CREATE_UPDATE_CLIENT_CLASS6**

create or update client class: %1

  Debug message issued when triggered an action to create or update client class

**MYSQL_CB_CREATE_UPDATE_GLOBAL_PARAMETER4**

create or update global parameter: %1

  Debug message issued when triggered an action to create or update global parameter

**MYSQL_CB_CREATE_UPDATE_GLOBAL_PARAMETER6**

create or update global parameter: %1

  Debug message issued when triggered an action to create or update global parameter

**MYSQL_CB_CREATE_UPDATE_OPTION4**

create or update option

  Debug message issued when triggered an action to create or update option

**MYSQL_CB_CREATE_UPDATE_OPTION6**

create or update option

  Debug message issued when triggered an action to create or update option

**MYSQL_CB_CREATE_UPDATE_OPTION_DEF4**

create or update option definition: %1 code: %2

  Debug message issued when triggered an action to create or update option definition

**MYSQL_CB_CREATE_UPDATE_OPTION_DEF6**

create or update option definition: %1 code: %2

  Debug message issued when triggered an action to create or update option definition

**MYSQL_CB_CREATE_UPDATE_SERVER4**

create or update server: %1

  Debug message issued when triggered an action to create or update a DHCPv4
  server information.

**MYSQL_CB_CREATE_UPDATE_SERVER6**

create or update server: %1

  Debug message issued when triggered an action to create or update a DHCPv6
  server information.

**MYSQL_CB_CREATE_UPDATE_SHARED_NETWORK4**

create or update shared network: %1

  Debug message issued when triggered an action to create or update shared network

**MYSQL_CB_CREATE_UPDATE_SHARED_NETWORK6**

create or update shared network: %1

  Debug message issued when triggered an action to create or update shared network

**MYSQL_CB_CREATE_UPDATE_SHARED_NETWORK_OPTION4**

create or update shared network: %1 option

  Debug message issued when triggered an action to create or update shared network option

**MYSQL_CB_CREATE_UPDATE_SHARED_NETWORK_OPTION6**

create or update shared network: %1 option

  Debug message issued when triggered an action to create or update shared network option

**MYSQL_CB_CREATE_UPDATE_SUBNET4**

create or update subnet: %1

  Debug message issued when triggered an action to create or update subnet

**MYSQL_CB_CREATE_UPDATE_SUBNET6**

create or update subnet: %1

  Debug message issued when triggered an action to create or update subnet

**MYSQL_CB_DEINIT_OK**

unloading MYSQL CB hooks library successful

  This informational message indicates that the MySQL Configuration Backend hooks
  library has been unloaded successfully.

**MYSQL_CB_DELETE_ALL_CLIENT_CLASSES4**

delete all client classes

  Debug message issued when triggered an action to delete all client classes

**MYSQL_CB_DELETE_ALL_CLIENT_CLASSES4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all client classes

**MYSQL_CB_DELETE_ALL_CLIENT_CLASSES6**

delete all client classes

  Debug message issued when triggered an action to delete all client classes

**MYSQL_CB_DELETE_ALL_CLIENT_CLASSES6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all client classes

**MYSQL_CB_DELETE_ALL_GLOBAL_PARAMETERS4**

delete all global parameters

  Debug message issued when triggered an action to delete all global parameters

**MYSQL_CB_DELETE_ALL_GLOBAL_PARAMETERS4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all global parameters

**MYSQL_CB_DELETE_ALL_GLOBAL_PARAMETERS6**

delete all global parameters

  Debug message issued when triggered an action to delete all global parameters

**MYSQL_CB_DELETE_ALL_GLOBAL_PARAMETERS6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all global parameters

**MYSQL_CB_DELETE_ALL_OPTION_DEFS4**

delete all option definitions

  Debug message issued when triggered an action to delete all option definitions

**MYSQL_CB_DELETE_ALL_OPTION_DEFS4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all option definitions

**MYSQL_CB_DELETE_ALL_OPTION_DEFS6**

delete all option definitions

  Debug message issued when triggered an action to delete all option definitions

**MYSQL_CB_DELETE_ALL_OPTION_DEFS6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all option definitions

**MYSQL_CB_DELETE_ALL_SERVERS4**

delete all DHCPv4 servers

  Debug message issued when triggered an action to delete all servers.

**MYSQL_CB_DELETE_ALL_SERVERS4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all servers.

**MYSQL_CB_DELETE_ALL_SERVERS6**

delete all DHCPv6 servers

  Debug message issued when triggered an action to delete all servers.

**MYSQL_CB_DELETE_ALL_SERVERS6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all servers.

**MYSQL_CB_DELETE_ALL_SHARED_NETWORKS4**

delete all shared networks

  Debug message issued when triggered an action to delete all shared networks

**MYSQL_CB_DELETE_ALL_SHARED_NETWORKS4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all shared networks

**MYSQL_CB_DELETE_ALL_SHARED_NETWORKS6**

delete all shared networks

  Debug message issued when triggered an action to delete all shared networks

**MYSQL_CB_DELETE_ALL_SHARED_NETWORKS6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all shared networks

**MYSQL_CB_DELETE_ALL_SUBNETS4**

delete all subnets

  Debug message issued when triggered an action to delete all subnets

**MYSQL_CB_DELETE_ALL_SUBNETS4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all subnets

**MYSQL_CB_DELETE_ALL_SUBNETS6**

delete all subnets

  Debug message issued when triggered an action to delete all subnets

**MYSQL_CB_DELETE_ALL_SUBNETS6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete all subnets

**MYSQL_CB_DELETE_BY_POOL_OPTION4**

delete pool start: %1 pool end: %2 option code: %3 space: %4

  Debug message issued when triggered an action to delete option by pool

**MYSQL_CB_DELETE_BY_POOL_OPTION4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option by pool

**MYSQL_CB_DELETE_BY_POOL_OPTION6**

delete pool start: %1 pool end: %2 option code: %3 space: %4

  Debug message issued when triggered an action to delete option by pool

**MYSQL_CB_DELETE_BY_POOL_OPTION6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option by pool

**MYSQL_CB_DELETE_BY_POOL_PREFIX_OPTION6**

delete prefix: %1 prefix len: %2 option code: %3 space: %4

  Debug message issued when triggered an action to delete option by prefix

**MYSQL_CB_DELETE_BY_POOL_PREFIX_OPTION6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option by prefix

**MYSQL_CB_DELETE_BY_PREFIX_SUBNET4**

delete subnet by prefix: %1

  Debug message issued when triggered an action to delete subnet by prefix

**MYSQL_CB_DELETE_BY_PREFIX_SUBNET4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete subnet by prefix

**MYSQL_CB_DELETE_BY_PREFIX_SUBNET6**

delete subnet by prefix: %1

  Debug message issued when triggered an action to delete subnet by prefix

**MYSQL_CB_DELETE_BY_PREFIX_SUBNET6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete subnet by prefix

**MYSQL_CB_DELETE_BY_SUBNET_ID_OPTION4**

delete by subnet id: %1 option code: %2 space: %3

  Debug message issued when triggered an action to delete option by subnet id

**MYSQL_CB_DELETE_BY_SUBNET_ID_OPTION4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option by subnet id

**MYSQL_CB_DELETE_BY_SUBNET_ID_OPTION6**

delete by subnet id: %1 option code: %2 space: %3

  Debug message issued when triggered an action to delete option by subnet id

**MYSQL_CB_DELETE_BY_SUBNET_ID_OPTION6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option by subnet id

**MYSQL_CB_DELETE_BY_SUBNET_ID_SUBNET4**

delete subnet by subnet id: %1

  Debug message issued when triggered an action to delete subnet by subnet id

**MYSQL_CB_DELETE_BY_SUBNET_ID_SUBNET4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete subnet by subnet id

**MYSQL_CB_DELETE_BY_SUBNET_ID_SUBNET6**

delete subnet by subnet id: %1

  Debug message issued when triggered an action to delete subnet by subnet id

**MYSQL_CB_DELETE_BY_SUBNET_ID_SUBNET6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete subnet by subnet id

**MYSQL_CB_DELETE_CLIENT_CLASS4**

delete client class: %1

  Debug message issued when triggered an action to delete client class

**MYSQL_CB_DELETE_CLIENT_CLASS4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete client class

**MYSQL_CB_DELETE_CLIENT_CLASS6**

delete client class: %1

  Debug message issued when triggered an action to delete client class

**MYSQL_CB_DELETE_CLIENT_CLASS6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete client class

**MYSQL_CB_DELETE_GLOBAL_PARAMETER4**

delete global parameter: %1

  Debug message issued when triggered an action to delete global parameter

**MYSQL_CB_DELETE_GLOBAL_PARAMETER4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete global parameter

**MYSQL_CB_DELETE_GLOBAL_PARAMETER6**

delete global parameter: %1

  Debug message issued when triggered an action to delete global parameter

**MYSQL_CB_DELETE_GLOBAL_PARAMETER6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete global parameter

**MYSQL_CB_DELETE_OPTION4**

delete option code: %1 space: %2

  Debug message issued when triggered an action to delete option

**MYSQL_CB_DELETE_OPTION4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option

**MYSQL_CB_DELETE_OPTION6**

delete option code: %1 space: %2

  Debug message issued when triggered an action to delete option

**MYSQL_CB_DELETE_OPTION6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option

**MYSQL_CB_DELETE_OPTION_DEF4**

delete option definition code: %1 space: %2

  Debug message issued when triggered an action to delete option definition

**MYSQL_CB_DELETE_OPTION_DEF4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option definition

**MYSQL_CB_DELETE_OPTION_DEF6**

delete option definition code: %1 space: %2

  Debug message issued when triggered an action to delete option definition

**MYSQL_CB_DELETE_OPTION_DEF6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete option definition

**MYSQL_CB_DELETE_SERVER4**

delete DHCPv4 server: %1

  Debug message issued when triggered an action to delete a server.

**MYSQL_CB_DELETE_SERVER4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete a server.

**MYSQL_CB_DELETE_SERVER6**

delete DHCPv6 server: %1

  Debug message issued when triggered an action to delete a server.

**MYSQL_CB_DELETE_SERVER6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete a server.

**MYSQL_CB_DELETE_SHARED_NETWORK4**

delete shared network: %1

  Debug message issued when triggered an action to delete shared network

**MYSQL_CB_DELETE_SHARED_NETWORK4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete shared network

**MYSQL_CB_DELETE_SHARED_NETWORK6**

delete shared network: %1

  Debug message issued when triggered an action to delete shared network

**MYSQL_CB_DELETE_SHARED_NETWORK6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete shared network

**MYSQL_CB_DELETE_SHARED_NETWORK_OPTION4**

delete shared network: %1 option code: %2 space: %3

  Debug message issued when triggered an action to delete shared network option

**MYSQL_CB_DELETE_SHARED_NETWORK_OPTION4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete shared network option

**MYSQL_CB_DELETE_SHARED_NETWORK_OPTION6**

delete shared network: %1 option code: %2 space: %3

  Debug message issued when triggered an action to delete shared network option

**MYSQL_CB_DELETE_SHARED_NETWORK_OPTION6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete shared network option

**MYSQL_CB_DELETE_SHARED_NETWORK_SUBNETS4**

delete shared network: %1 subnets

  Debug message issued when triggered an action to delete shared network subnets

**MYSQL_CB_DELETE_SHARED_NETWORK_SUBNETS4_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete shared network subnets

**MYSQL_CB_DELETE_SHARED_NETWORK_SUBNETS6**

delete shared network: %1 subnets

  Debug message issued when triggered an action to delete shared network subnets

**MYSQL_CB_DELETE_SHARED_NETWORK_SUBNETS6_RESULT**

deleted: %1 entries

  Debug message indicating the result of an action to delete shared network subnets

**MYSQL_CB_GET_ALL_CLIENT_CLASSES4**

retrieving all client classes

  Debug message issued when triggered an action to retrieve all client classes

**MYSQL_CB_GET_ALL_CLIENT_CLASSES4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all client classes

**MYSQL_CB_GET_ALL_CLIENT_CLASSES6**

retrieving all client classes

  Debug message issued when triggered an action to retrieve all client classes

**MYSQL_CB_GET_ALL_CLIENT_CLASSES6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all client classes

**MYSQL_CB_GET_ALL_GLOBAL_PARAMETERS4**

retrieving all global parameters

  Debug message issued when triggered an action to retrieve all global parameters

**MYSQL_CB_GET_ALL_GLOBAL_PARAMETERS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all global parameters

**MYSQL_CB_GET_ALL_GLOBAL_PARAMETERS6**

retrieving all global parameters

  Debug message issued when triggered an action to retrieve all global parameters

**MYSQL_CB_GET_ALL_GLOBAL_PARAMETERS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all global parameters

**MYSQL_CB_GET_ALL_OPTIONS4**

retrieving all options

  Debug message issued when triggered an action to retrieve all options

**MYSQL_CB_GET_ALL_OPTIONS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all options

**MYSQL_CB_GET_ALL_OPTIONS6**

retrieving all options

  Debug message issued when triggered an action to retrieve all options

**MYSQL_CB_GET_ALL_OPTIONS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all options

**MYSQL_CB_GET_ALL_OPTION_DEFS4**

retrieving all option definitions

  Debug message issued when triggered an action to retrieve all option definitions

**MYSQL_CB_GET_ALL_OPTION_DEFS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all option definitions

**MYSQL_CB_GET_ALL_OPTION_DEFS6**

retrieving all option definitions

  Debug message issued when triggered an action to retrieve all option definitions

**MYSQL_CB_GET_ALL_OPTION_DEFS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all option definitions

**MYSQL_CB_GET_ALL_SERVERS4**

retrieving all servers

  Debug message issued when triggered an action to retrieve all DHCPv4
  servers

**MYSQL_CB_GET_ALL_SERVERS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all DHCPv4
  servers

**MYSQL_CB_GET_ALL_SERVERS6**

retrieving all DHCPv6 servers

  Debug message issued when triggered an action to retrieve all DHCPv6
  servers

**MYSQL_CB_GET_ALL_SERVERS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all DHCPv6
  servers

**MYSQL_CB_GET_ALL_SHARED_NETWORKS4**

retrieving all shared networks

  Debug message issued when triggered an action to retrieve all shared networks

**MYSQL_CB_GET_ALL_SHARED_NETWORKS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all shared networks

**MYSQL_CB_GET_ALL_SHARED_NETWORKS6**

retrieving all shared networks

  Debug message issued when triggered an action to retrieve all shared networks

**MYSQL_CB_GET_ALL_SHARED_NETWORKS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all shared networks

**MYSQL_CB_GET_ALL_SUBNETS4**

retrieving all subnets

  Debug message issued when triggered an action to retrieve all subnets

**MYSQL_CB_GET_ALL_SUBNETS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all subnets

**MYSQL_CB_GET_ALL_SUBNETS6**

retrieving all subnets

  Debug message issued when triggered an action to retrieve all subnets

**MYSQL_CB_GET_ALL_SUBNETS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve all subnets

**MYSQL_CB_GET_CLIENT_CLASS4**

retrieving client class: %1

  Debug message issued when triggered an action to retrieve a client class

**MYSQL_CB_GET_CLIENT_CLASS6**

retrieving client class: %1

  Debug message issued when triggered an action to retrieve a client class

**MYSQL_CB_GET_GLOBAL_PARAMETER4**

retrieving global parameter: %1

  Debug message issued when triggered an action to retrieve global parameter

**MYSQL_CB_GET_GLOBAL_PARAMETER6**

retrieving global parameter: %1

  Debug message issued when triggered an action to retrieve global parameter

**MYSQL_CB_GET_HOST4**

get host

  Debug message issued when triggered an action to retrieve host

**MYSQL_CB_GET_HOST6**

get host

  Debug message issued when triggered an action to retrieve host

**MYSQL_CB_GET_MODIFIED_CLIENT_CLASSES4**

retrieving modified client classes from: %1

  Debug message issued when triggered an action to retrieve modified client classes from specified time

**MYSQL_CB_GET_MODIFIED_CLIENT_CLASSES4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified client classes from specified time

**MYSQL_CB_GET_MODIFIED_CLIENT_CLASSES6**

retrieving modified client classes from: %1

  Debug message issued when triggered an action to retrieve modified client classes from specified time

**MYSQL_CB_GET_MODIFIED_CLIENT_CLASSES6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified client classes from specified time

**MYSQL_CB_GET_MODIFIED_GLOBAL_PARAMETERS4**

retrieving modified global parameters from: %1

  Debug message issued when triggered an action to retrieve modified global parameters from specified time

**MYSQL_CB_GET_MODIFIED_GLOBAL_PARAMETERS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified global parameters from specified time

**MYSQL_CB_GET_MODIFIED_GLOBAL_PARAMETERS6**

retrieving modified global parameters from: %1

  Debug message issued when triggered an action to retrieve modified global parameters from specified time

**MYSQL_CB_GET_MODIFIED_GLOBAL_PARAMETERS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified global parameters from specified time

**MYSQL_CB_GET_MODIFIED_OPTIONS4**

retrieving modified options from: %1

  Debug message issued when triggered an action to retrieve modified options from specified time

**MYSQL_CB_GET_MODIFIED_OPTIONS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified options from specified time

**MYSQL_CB_GET_MODIFIED_OPTIONS6**

retrieving modified options from: %1

  Debug message issued when triggered an action to retrieve modified options from specified time

**MYSQL_CB_GET_MODIFIED_OPTIONS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified options from specified time

**MYSQL_CB_GET_MODIFIED_OPTION_DEFS4**

retrieving modified option definitions from: %1

  Debug message issued when triggered an action to retrieve modified option definitions from specified time

**MYSQL_CB_GET_MODIFIED_OPTION_DEFS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified option definitions from specified time

**MYSQL_CB_GET_MODIFIED_OPTION_DEFS6**

retrieving modified option definitions from: %1

  Debug message issued when triggered an action to retrieve modified option definitions from specified time

**MYSQL_CB_GET_MODIFIED_OPTION_DEFS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified option definitions from specified time

**MYSQL_CB_GET_MODIFIED_SHARED_NETWORKS4**

retrieving modified shared networks from: %1

  Debug message issued when triggered an action to retrieve modified shared networks from specified time

**MYSQL_CB_GET_MODIFIED_SHARED_NETWORKS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified shared networks from specified time

**MYSQL_CB_GET_MODIFIED_SHARED_NETWORKS6**

retrieving modified shared networks from: %1

  Debug message issued when triggered an action to retrieve modified shared networks from specified time

**MYSQL_CB_GET_MODIFIED_SHARED_NETWORKS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified shared networks from specified time

**MYSQL_CB_GET_MODIFIED_SUBNETS4**

retrieving modified subnets from: %1

  Debug message issued when triggered an action to retrieve modified subnets from specified time

**MYSQL_CB_GET_MODIFIED_SUBNETS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified subnets from specified time

**MYSQL_CB_GET_MODIFIED_SUBNETS6**

retrieving modified subnets from: %1

  Debug message issued when triggered an action to retrieve modified subnets from specified time

**MYSQL_CB_GET_MODIFIED_SUBNETS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve modified subnets from specified time

**MYSQL_CB_GET_OPTION4**

retrieving option code: %1 space: %2

  Debug message issued when triggered an action to retrieve option

**MYSQL_CB_GET_OPTION6**

retrieving option code: %1 space: %2

  Debug message issued when triggered an action to retrieve option

**MYSQL_CB_GET_OPTION_DEF4**

retrieving option definition code: %1 space: %2

  Debug message issued when triggered an action to retrieve option definition

**MYSQL_CB_GET_OPTION_DEF6**

retrieving option definition code: %1 space: %2

  Debug message issued when triggered an action to retrieve option definition

**MYSQL_CB_GET_PORT4**

get port

  Debug message issued when triggered an action to retrieve port

**MYSQL_CB_GET_PORT6**

get port

  Debug message issued when triggered an action to retrieve port

**MYSQL_CB_GET_RECENT_AUDIT_ENTRIES4**

retrieving audit entries from: %1 %2

  Debug message issued when triggered an action to retrieve audit entries from specified time and id.

**MYSQL_CB_GET_RECENT_AUDIT_ENTRIES4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve audit entries from specified time

**MYSQL_CB_GET_RECENT_AUDIT_ENTRIES6**

retrieving audit entries from: %1 %2

  Debug message issued when triggered an action to retrieve audit entries from specified time and id

**MYSQL_CB_GET_RECENT_AUDIT_ENTRIES6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve audit entries from specified time

**MYSQL_CB_GET_SERVER4**

retrieving DHCPv4 server: %1

  Debug message issued when triggered an action to retrieve a DHCPv4 server information.

**MYSQL_CB_GET_SERVER6**

retrieving DHCPv6 server: %1

  Debug message issued when triggered an action to retrieve a DHCPv6 server information.

**MYSQL_CB_GET_SHARED_NETWORK4**

retrieving shared network: %1

  Debug message issued when triggered an action to retrieve shared network

**MYSQL_CB_GET_SHARED_NETWORK6**

retrieving shared network: %1

  Debug message issued when triggered an action to retrieve shared network

**MYSQL_CB_GET_SHARED_NETWORK_SUBNETS4**

retrieving shared network: %1 subnets

  Debug message issued when triggered an action to retrieve shared network subnets

**MYSQL_CB_GET_SHARED_NETWORK_SUBNETS4_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve shared network subnets

**MYSQL_CB_GET_SHARED_NETWORK_SUBNETS6**

retrieving shared network: %1 subnets

  Debug message issued when triggered an action to retrieve shared network subnets

**MYSQL_CB_GET_SHARED_NETWORK_SUBNETS6_RESULT**

retrieving: %1 elements

  Debug message indicating the result of an action to retrieve shared network subnets

**MYSQL_CB_GET_SUBNET4_BY_PREFIX**

retrieving subnet by prefix: %1

  Debug message issued when triggered an action to retrieve subnet by prefix

**MYSQL_CB_GET_SUBNET4_BY_SUBNET_ID**

retrieving subnet by subnet id: %1

  Debug message issued when triggered an action to retrieve subnet by subnet id

**MYSQL_CB_GET_SUBNET6_BY_PREFIX**

retrieving subnet by prefix: %1

  Debug message issued when triggered an action to retrieve subnet by prefix

**MYSQL_CB_GET_SUBNET6_BY_SUBNET_ID**

retrieving subnet by subnet id: %1

  Debug message issued when triggered an action to retrieve subnet by subnet id

**MYSQL_CB_GET_TYPE4**

get type

  Debug message issued when triggered an action to retrieve type

**MYSQL_CB_GET_TYPE6**

get type

  Debug message issued when triggered an action to retrieve type

**MYSQL_CB_INIT_OK**

loading MYSQL CB hooks library successful

  This informational message indicates that the MySQL Configuration Backend hooks
  library has been loaded successfully.

**MYSQL_CB_NO_TLS**

TLS was required but is not used

  This error message is issued when TLS for the connection was required but
  TLS is not used.

**MYSQL_CB_RECONNECT_ATTEMPT_FAILED4**

database reconnect failed: %1

  Error message issued when an attempt to reconnect has failed.

**MYSQL_CB_RECONNECT_ATTEMPT_FAILED6**

database reconnect failed: %1

  Error message issued when an attempt to reconnect has failed.

**MYSQL_CB_RECONNECT_ATTEMPT_SCHEDULE4**

scheduling attempt %1 of %2 in %3 milliseconds

  Info message issued when the server is scheduling the next attempt to reconnect
  to the database.  This occurs when the server has lost database connectivity and
  is attempting to reconnect automatically.

**MYSQL_CB_RECONNECT_ATTEMPT_SCHEDULE6**

scheduling attempt %1 of %2 in %3 milliseconds

  Info message issued when the server is scheduling the next attempt to reconnect
  to the database.  This occurs when the server has lost database connectivity and
  is attempting to reconnect automatically.

**MYSQL_CB_RECONNECT_FAILED4**

maximum number of database reconnect attempts: %1, has been exhausted without success

  Error message issued when the server failed to reconnect.  Loss of connectivity
  is typically a network or database server issue.

**MYSQL_CB_RECONNECT_FAILED6**

maximum number of database reconnect attempts: %1, has been exhausted without success

  Error message issued when the server failed to reconnect.  Loss of connectivity
  is typically a network or database server issue.

**MYSQL_CB_REGISTER_BACKEND_TYPE4**

register backend

  Debug message issued when triggered an action to register backend

**MYSQL_CB_REGISTER_BACKEND_TYPE6**

register backend

  Debug message issued when triggered an action to register backend

**MYSQL_CB_TLS_CIPHER**

TLS cipher: %1

  A debug message issued when a new MySQL connected is created with TLS.
  The TLS cipher name is logged.

**MYSQL_CB_UNREGISTER_BACKEND_TYPE4**

unregister backend

  Debug message issued when triggered an action to unregister backend

NETCONF
~~~~~~~

**NETCONF_BOOT_UPDATE_COMPLETED**

Boot-update configuration completed for server %1

  This informational message is issued when the initial configuration
  was retrieved from Netconf and successfully applied to Kea server.

**NETCONF_CONFIG_CHANGED_DETAIL**

YANG configuration changed: %1

  This debug message indicates a YANG configuration change. The format
  is the change operation (created, modified, deleted or moved) followed
  by xpaths and values of old and new nodes.

**NETCONF_CONFIG_CHANGE_EVENT**

Received YANG configuration change %1 event

  This informational message is issued when Netconf receives a YANG
  configuration change event. The type of event is printed.

**NETCONF_CONFIG_CHECK_FAIL**

Netconf configuration check failed: %1

  This error message indicates that Netconf had failed configuration
  check. Details are provided. Additional details may be available
  in earlier log entries, possibly on lower levels.

**NETCONF_CONFIG_FAIL**

Netconf configuration failed: %1

  This error message indicates that Netconf had failed configuration
  attempt. Details are provided. Additional details may be available
  in earlier log entries, possibly on lower levels.

**NETCONF_CONFIG_SYNTAX_WARNING**

Netconf configuration syntax warning: %1

  This warning message indicates that the Netconf configuration had a minor
  syntax error. The error was displayed and the configuration parsing resumed.

**NETCONF_FAILED**

application experienced a fatal error: %1

  This is a fatal error message issued when the Netconf application
  got an unrecoverable error from within the event loop.

**NETCONF_GET_CONFIG**

got configuration from %1 server: %2

  This debug message indicates that Netconf got the configuration from a
  Kea server. The server name and the retrieved configuration are printed.

**NETCONF_GET_CONFIG_FAILED**

getting configuration from %1 server failed: %2

  The error message indicates that Netconf got an error getting the
  configuration from a Kea server. Make sure that the server is up and
  running, has appropriate control socket defined and that the controls
  socket configuration on the server matches that of kea-netconf. The
  name of the server and the error are printed.

**NETCONF_GET_CONFIG_STARTED**

getting configuration from %1 server

  This informational message indicates that Netconf is trying to get the
  configuration from a Kea server.

**NETCONF_LOG_CHANGE_FAIL**

Netconf configuration change logging failed: %1

  The warning message indicates that the configuration change logging
  encountered an unexpected condition. Details of it will be logged.

**NETCONF_MODULE_MISSING_ERR**

Missing essential module %1 in sysrepo

  This fatal error message indicates that a module required by Netconf
  configuration is not available in the sysrepo repository.  The name of
  the module is printed.

**NETCONF_MODULE_MISSING_WARN**

Missing module %1 in sysrepo

  This warning message indicates that a module used by Kea is not
  available in the sysrepo repository. The name of the module is printed.

**NETCONF_MODULE_REVISION_ERR**

Essential module %1 does NOT have the right revision: expected %2, got %3

  This fatal error message indicates that a module required by Netconf
  configuration is not at the right revision in the sysrepo repository.
  The name, expected and available revisions of the module are printed.

**NETCONF_MODULE_REVISION_WARN**

Module %1 does NOT have the right revision: expected %2, got %3

  This warning message indicates that a module used by Kea is not at the
  right revision in the sysrepo repository. The name, expected and
  available revisions of the module are printed.

**NETCONF_NOTIFICATION_RECEIVED**

Received notification of type %1 for module %1: %2

  This informational message logs any YANG notification that has been signaled
  by the server, sent to kea-netconf which then was forwarded to subscribed
  clients. To achieve this, kea-netconf subscribes itself as a client to all
  notifications for the configured module.

**NETCONF_RUN_EXIT**

application is exiting the event loop

  This is a debug message issued when the Netconf application exits its
  event loop. This is a normal step during kea-netconf shutdown.

**NETCONF_SET_CONFIG**

set configuration to %1 server: %2

  This debug message indicates that Netconf set the configuration to a
  Kea server. The server name and the applied configuration are printed.

**NETCONF_SET_CONFIG_FAILED**

setting configuration to %1 server failed: %2

  The error message indicates that Netconf got an error setting the
  configuration to a Kea server. Make sure that the server is up and
  running, has appropriate control socket defined and that the controls
  socket configuration on the server matches that of kea-netconf. The
  name of the server and the error are printed.

**NETCONF_SET_CONFIG_STARTED**

setting configuration to %1 server

  This informational message indicates that Netconf is trying to set the
  configuration to a Kea server.

**NETCONF_STARTED**

Netconf (version %1) started

  This informational message indicates that Netconf has processed
  all configuration information and is ready to begin processing.
  The version is also printed.

**NETCONF_SUBSCRIBE_CONFIG**

subscribing configuration changes for %1 server with %2 module

  This information message indicates that Netconf is trying to subscribe
  configuration changes for a Kea server. The names of the server and
  the module are printed.

**NETCONF_SUBSCRIBE_CONFIG_FAILED**

subscribe configuration changes for %1 server with %2 module failed: %3

  The error message indicates that Netconf got an error subscribing
  configuration changes for a Kea server. The names of the server and
  the module, and the error are printed.

**NETCONF_SUBSCRIBE_NOTIFICATIONS**

subscribing to notifications for %1 server with %2 module

  This information message indicates that Netconf is trying to subscribe to
  notifications for a Kea server. The server name and module name are printed.

**NETCONF_SUBSCRIBE_NOTIFICATIONS_FAILED**

subscribing to notifications for %1 server with %2 module failed: %3

  The error message indicates that Netconf got an error subscribing to
  notifications for a Kea server. The server name, module name and the error are
  printed.

**NETCONF_UPDATE_CONFIG**

updating configuration with %1 server: %2

  This debug message indicates that Netconf update the configuration
  of a Kea server. The server name and the updated configuration are
  printed.

**NETCONF_UPDATE_CONFIG_COMPLETED**

completed updating configuration for %1 server

  This informational message indicates that Netconf updated with success the
  configuration of a Kea server.

**NETCONF_UPDATE_CONFIG_FAILED**

updating configuration with %1 server: %2

  The error message indicates that Netconf got an error updating the
  configuration of a Kea server. This includes a configuration rejected
  by a Kea server when it tried to apply it. The name of the server and
  the error are printed.

**NETCONF_UPDATE_CONFIG_STARTED**

started updating configuration for %1 server

  This informational message indicates that Netconf is trying to update the
  configuration of a Kea server.

**NETCONF_VALIDATE_CONFIG**

validating configuration with %1 server: %2

  This debug message indicates that Netconf is validating the configuration
  with a Kea server. The server name and the validated configuration are
  printed.

**NETCONF_VALIDATE_CONFIG_COMPLETED**

completed validating configuration for %1 server

  This informational message indicates that Netconf validated with success the
  configuration with a Kea server.

**NETCONF_VALIDATE_CONFIG_FAILED**

validating configuration with %1 server got an error: %2

  The error message indicates that Netconf got an error validating the
  configuration with a Kea server. This message is produced when
  exception is thrown during an attempt to validate received
  configuration. Additional explanation may be provided as a
  parameter. You may also take a look at earlier log messages.  The name
  of the server and the error are printed.

**NETCONF_VALIDATE_CONFIG_REJECTED**

validating configuration with %1 server was rejected: %2

  The warning message indicates that Netconf got an error validating the
  configuration with a Kea server. This message is printed when the
  configuration was rejected during normal processing. Additional
  explanation may be provided as a parameter. You may also take a look
  at earlier log messages.  The name of the server and the error are
  printed.

STAT
~~~~

**STAT_CMDS_DEINIT_FAILED**

unloading Stat Commands hooks library failed: %1

  This error message indicates an error during unloading the Lease Commands
  hooks library. The details of the error are provided as argument of
  the log message.

**STAT_CMDS_DEINIT_OK**

unloading Stat Commands hooks library successful

  This info message indicates that the Stat Commands hooks library has been
  removed successfully.

**STAT_CMDS_INIT_FAILED**

loading Stat Commands hooks library failed: %1

  This error message indicates an error during loading the Lease Commands
  hooks library. The details of the error are provided as argument of
  the log message.

**STAT_CMDS_INIT_OK**

loading Stat Commands hooks library successful

  This info message indicates that the Stat Commands hooks library has been
  loaded successfully. Enjoy!

**STAT_CMDS_LEASE4_FAILED**

stat-lease4-get command failed: reason: %1

  The stat-lease4-get command has failed. The reason for failure is logged.

**STAT_CMDS_LEASE4_GET**

stat-lease4-get command successful, parameters: %1 rows found: %2

  The stat-lease4-get command has been successful. The log will contain
  the parameters supplied and the number of rows found.

**STAT_CMDS_LEASE4_GET_FAILED**

stat-lease4-get command failed: parameters: %1, reason: %2

  The stat-lease4-get command has failed. Both the parameters supplied and
  the reason for failure are logged.

**STAT_CMDS_LEASE4_GET_INVALID**

stat-lease4-get command is malformed or invalid, reason: %1

  The stat-lease4-get command was either malformed or contained invalid
  parameters.  A detailed explanation should be logged.

**STAT_CMDS_LEASE4_GET_NO_SUBNETS**

stat-lease4-get, parameters: %1, %2"

  The parameters submitted with stat-lease4-get were valid but excluded all
  known subnets.  The parameters supplied along with an explanation should
  be logged.

**STAT_CMDS_LEASE4_ORPHANED_STATS**

stat-lease4-get command omitted statistics for one or more non-existent subnets

  During processing the stat-lease4-get found statistics for subnet IDs for
  non-existent subnets. These values were omitted from the command response
  returned to the user. This may occur when subnets have been removed from
  the configuration in a manner that did not also remove the statistics. While
  the existence of such statistics is not harmful, steps should be considered
  to remove them.  For memfile lease storage, the problem should disappear
  upon configuration reload or server restart. For database lease storage the
  issue is more complicated and as of Kea 2.0.0 we do not yet have a clean
  solution.

**STAT_CMDS_LEASE6_FAILED**

stat-lease6-get command failed: reason: %1

  The stat-lease6-get command has failed. The reason for failure is logged.

**STAT_CMDS_LEASE6_GET**

stat-lease6-get command successful, parameters: %1 rows found: %2

  The stat-lease6-get command has been successful. The log will contain
  the parameters supplied and the number of rows found.

**STAT_CMDS_LEASE6_GET_FAILED**

stat-lease6-get command failed: parameters: %1, reason: %2

  The stat-lease6-get command has failed. Both the parameters supplied and
  the reason for failure are logged.

**STAT_CMDS_LEASE6_GET_INVALID**

stat-lease6-get command is malformed or invalid, reason: %1

  The stat-lease6-get command was either malformed or contained invalid
  parameters.  A detailed explanation should be logged.

**STAT_CMDS_LEASE6_GET_NO_SUBNETS**

stat-lease6-get, parameters: %1, %2"

  The parameters submitted with stat-lease6-get were valid but excluded all
  known subnets.  The parameters supplied along with an explanation should
  be logged.

USER
~~~~

**USER_CHK_HOOK_LOAD_ERROR**

DHCP UserCheckHook could not be loaded: %1

  This is an error message issued when the DHCP UserCheckHook could not be loaded.
  The exact cause should be explained in the log message.  User subnet selection
  will revert to default processing.

**USER_CHK_HOOK_UNLOAD_ERROR**

DHCP UserCheckHook an error occurred unloading the library: %1

  This is an error message issued when an error occurs while unloading the
  UserCheckHook library.  This is unlikely to occur and normal operations of the
  library will likely resume when it is next loaded.

**USER_CHK_SUBNET4_SELECT_ERROR**

DHCP UserCheckHook an unexpected error occurred in subnet4_select callout: %1

  This is an error message issued when the DHCP UserCheckHook subnet4_select hook
  encounters an unexpected error.  The message should contain a more detailed
  explanation.

**USER_CHK_SUBNET4_SELECT_REGISTRY_NULL**

DHCP UserCheckHook UserRegistry has not been created.

  This is an error message issued when the DHCP UserCheckHook subnet4_select hook
  has been invoked but the UserRegistry has not been created.  This is a
  programmatic error and should not occur.

**USER_CHK_SUBNET6_SELECT_ERROR**

DHCP UserCheckHook an unexpected error occurred in subnet6_select callout: %1

  This is an error message issued when the DHCP UserCheckHook subnet6_select hook
  encounters an unexpected error.  The message should contain a more detailed
  explanation.

