Contents
Index 🔎︎

# SFDialogs.Dialog service

The Dialog service contributes to the management of dialogs created with the Basic Dialog Editor. Each instance of the current class represents a single dialog box displayed to the user.

A dialog box can be displayed in modal or in non-modal modes.

In modal mode, the box is displayed and the execution of the macro process is suspended until one of the OK or Cancel buttons is pressed. In the meantime, user actions executed on the box can trigger specific actions.

In non-modal mode, the dialog box is "floating" on the user desktop and the execution of the macro process continues normally. A non-modal dialog closes when it is terminated with the Terminate() method or when the LibreOffice session ends. The window close button is inactive in non-modal dialogs.

A dialog box disappears from memory after its explicit termination.

The SFDialogs.Dialog service is closely related to the SFDialogs.DialogControl service.

## Service invocation and usage

The Dialog service is invoked through the CreateScriptService method. It requires three positional arguments to specify the dialog box to activate:

Container: "GlobalScope" for preinstalled libraries or a window name as defined by ScriptForge.UI service. Empty string "" default value stands for the current document.

Library: The case-sensitive name of a library contained in the container. Default value is "Standard".

DialogName: A case-sensitive string designating the dialog.

Below LibreOffice Basic and Python examples are displaying the dlgConsole dialog that belongs to ScriptForge shared library:

          Dim oDlg As Object, lButton As Long
          Dim Container As String, Library As String, DialogName As String
          Set oDlg = CreateScriptService("SFDialogs.Dialog", "GlobalScope", "ScriptForge", "dlgConsole")
          '... controls initialization goes here...
          lButton = oDlg.Execute()
          'Default mode = Modal
          If lButton = oDlg.OKBUTTON Then
          '... Process controls and do what is needed here
          End If
          oDlg.Terminate()

Or using Python:

        dlg = CreateScriptService('SFDialogs.Dialog', 'GlobalScope', 'ScriptForge', 'dlgConsole')
        # ... controls initialization goes here...
        rc = dlg.Execute()
        # Default mode is Modal
        if rc == dlg.OKBUTTON:
            # ... Process controls and do what is needed here
        dlg.Terminate()

Alternatively a Dialog instance can be retrieved via the SFDialogs.DialogEvent service, providing that the dialog was initiated with the Dialog service. DialogEvent returns the SFDialogs.Dialog service instance that triggered the event.

        Sub SomeEvent(ByRef poEvent As Object)
            Dim oDlg As Object
            Set oDlg = CreateScriptService("SFDialogs.DialogEvent", poEvent)
        End Sub

with Python:

        def some_event(event: uno):
            dlg = CreateScriptService("SFDialogs.DialogEvent", event)

Note that in previous examples, the prefix "SFDialogs." may be omitted when deemed appropriate.

## Properties

Name | ReadOnly | Type | Description
OKBUTTON | Yes | Integer | Value = 1. An OK button was pressed.
CANCELBUTTON | Yes | Integer | Value = 0. A Cancel button was pressed.
Caption | No | String | Specify the title of the dialog.
Height | No | Long | Specify the height of the dialog box.
Modal | Yes | Boolean | Specifies if the dialog box is currently in execution in modal mode.
Name | Yes | String | The name of the dialog
Page | No | Integer | A dialog may have several pages that can be traversed by the user step by step. The Page property of the Dialog object defines which page of the dialog is active.
Visible | No | Boolean | Specify if the dialog box is visible on the desktop. By default it is not visible until the Execute() method is run and visible afterwards.
XDialogModel | Yes | UNO object | The UNO object representing the dialog model. Refer to XControlModel and UnoControlDialogModel in Application Programming Interface (API) documentation for detailed information.
XDialogView | Yes | UNO object | The UNO object representing the dialog view. Refer to XControl and UnoControlDialog in Application Programming Interface (API) documentation for detailed information.
Width | No | Long | Specify the width of the dialog box.

## Event properties

Returns a URI string with the reference to the script triggered by the event. Read its specification in the scripting framework URI specification.

Name | ReadOnly | Basic IDE Description
OnFocusGained | Yes | When receiving focus
OnFocusLost | Yes | When losing focus
OnKeyPressed | Yes | Key pressed
OnKeyReleased | Yes | Key released
OnMouseDragged | Yes | Mouse moved while key presses
OnMouseEntered | Yes | Mouse inside
OnMouseExited | Yes | Mouse outside
OnMouseMoved | Yes | Mouse moved
OnMousePressed | Yes | Mouse button pressed
OnMouseReleased | Yes | Mouse button released

| Methods |
Activate Controls | EndExecute Execute | GetTextsFromL10N Terminate

## Activate

Set the focus on the current Dialog instance. Return True if focusing was successful.

This method is called from a dialog or control event, or when a dialog is displayed in non-modal mode.

### Syntax:

svc.Activate(): bool

### Example:

          Dim oDlg As Object
          Set oDlg = CreateScriptService(,, "myDialog")
          oDlg.Execute()
          ' ...
          oDlg.Activate()

Python and LibreOffice Basic examples both assume that the dialog is stored in current document's Standard library.

         dlg = CreateScriptService(,,'myDialog')
         dlg.Execute()
         # ...
         dlg.Activate()

## Controls

Return either:

- the list of the controls contained in the dialog

- a DialogControl class instance based on its name

### Syntax:

svc.Controls(): str[0..*]

svc.Controls(controlname: str): svc

### Parameters:

ControlName : A valid control name as a case-sensitive string. If absent, the list of control names is returned as a zero-based array.

### Example:

          Dim myDialog As Object, myList As Variant, myControl As Object
          Set myDialog = CreateScriptService("SFDialogs.Dialog", , "Standard", "Dialog1")
          myList = myDialog.Controls()
          Set myControl = myDialog.Controls("myTextBox")

         dlg = CreateScriptService('SFDialogs.Dialog','', 'Standard', 'Dialog1')
         ctrls = dlg.Controls()
         ctrl = dlg.Controls('myTextBox')

## EndExecute

Ends the display of a modal dialog and gives back the argument as return value for the current Execute() running action.

EndExecute() is usually contained in the processing of a macro triggered by a dialog or control event.

### Syntax:

svc.EndExecute(returnvalue: int)

### Parameters:

returnvalue: The value passed to the running Execute() method.

### Example:

Using LibreOffice Basic:

          Sub OnEvent(poEvent As com.sun.star.lang.EventObject)
              Dim oDlg As Object
              Set oDlg = CreateScriptService("SFDialogs.DialogEvent", poEvent)
              oDlg.EndExecute(ReturnValue := 25)
          End Sub

Using Python:

         from com.sun.star.lang import EventObject
         def on_event(event: EventObject):
             dlg = CreateScriptService("SFDialogs.DialogEvent", event)
             dlg.EndExecute(25)

Above com.sun.star.lang.EventObject mentions are optional. Such annotations help identify LibreOffice Application Programming Interface (API).

## Execute

Display the dialog box and, when modal, wait for its termination by the user. The returned value is either:

- 0 : Cancel button pressed

- 1 : OK button pressed

- Otherwise the dialog stopped with an EndExecute() statement issued by a dialog or control event

For non-modal dialog boxes the method always returns 0 and the execution of the macro continues.

### Syntax:

svc.Execute(modal: bool = True): int

### Parameters:

modal: False when non-modal dialog. Default = True.

### Example:

In this Basic example myDialog dialog is stored in current document's Standard library.

          Dim oDlg As Object, lReturn As Long
          Set oDlg = CreateScriptService("SFDialogs.Dialog", , , "myDialog")
          lReturn = oDlg.Execute(Modal := False)
          Select Case lReturn
              ' ...
          End Select

This Python code displays DlgConvert modal dialog from Euro shared Basic library.

         dlg = CreateScriptService("SFDialogs.Dialog", 'GlobalScope', 'Euro', "DlgConvert")
         rc = dlg.Execute()
         if rc == dlg.CANCELBUTTON:
             # ...

## GetTextsFromL10N

Replaces all fixed text strings in a dialog by their translated versions based on a L10N service instance. This method translates the following strings:

- The title of the dialog.

- The caption of the following control types: Button, CheckBox, FixedLine, FixedText, GroupBox and RadioButton.

- Static strings in ListBoxes and ComboBoxes.

- The tooltip or help text displayed when the mouse hovers over the control.

The method returns True if successful.

To create a list of translatable strings in a dialog use the AddTextsFromDialog method from the L10N service.

### Syntax:

svc.GetTextsFromL10N(l10n: svc): bool

### Parameters:

l10n: A L10N service instance from which translated strings will be retrieved.

### Example:

The following example loads translated strings and applies them to the dialog "MyDialog".

##### In Basic

         oDlg = CreateScriptService("Dialog", "GlobalScope", "Standard", "MyDialog")
         myPO = CreateScriptService("L10N", "/home/user/po_files/")
         oDlg.GetTextsFromL10N(myPO)
         oDlg.Execute()

##### In Python

         dlg = CreateScriptService("Dialog", "GlobalScope", "Standard", "MyDialog")
         myPO = CreateScriptService("L10N", "/home/user/po_files/")
         dlg.GetTextsFromL10N(myPO)
         dlg.Execute()

Read the L10N service help page to learn more about how PO and POT files are handled.

## Terminate

Terminate the Dialog service for the current instance. Return True if the termination was successful.

### Syntax:

svc.Terminate(): bool

### Example:

Below Basic and Python examples open DlgConsole and dlgTrace non-modal dialogs. They are respectively stored in ScriptForge and Access2Base shared libraries. Dialog close buttons are disabled and explicit termination is performed at the end of a running process.

In this example a button in DlgConsole is substituting inhibited window closing:

         oDlg = CreateScriptService("SFDialogs.Dialog","GlobalScope","ScriptForge","DlgConsole")
         oDlg.Execute(modal:=False)
         Wait 5000
         oDlg.Terminate()

With Python:

         from time import sleep
         dlg = CreateScriptService('SFDialogs.Dialog',"GlobalScope",'Access2Base',"dlgTrace")
         dlg.Execute(modal=False)
         sleep 5
         dlg.Terminate()

All ScriptForge Basic routines or identifiers that are prefixed with an underscore character "_" are reserved for internal use. They are not meant be used in Basic macros or Python scripts.

Saistītie temati

SFDialogs.DialogControl service

ScriptForge.UI service