XLOCK(1)

NAME
xlock - Locks the local X display until a password is entered.

SYNOPSIS
xlock [ -help ] [ -version ] [ -resources ] [ -display displayname ] [ -visual visualname ] [ -name resourcename ] [ -mode modename ] [ -delay usecs ] [ -batchcount num ] [ -count num ] [ -cycles num ] [ -ncolors num ] [ -size num ] [ -saturation value ] [ -erasemode modename ] [ -erasedelay usecs ] [ -/+allowaccess ] [ -vtlock modename ] [ -/+nolock ] [ -/+inwindow ] [ -/+inroot ] [ -/+remote ] [ -/+mono ] [ -/+allowroot ] [ -/+debug ] [ -/+description ] [ -/+echokeys ] [ -echokey echokey ] [ -/+enablesaver ] [ -/+resetsaver ] [ -/+grabmouse ] [ -/+grabserver ] [ -/+install ] [ -/+mousemotion ] [ -/+sound ] [ -/+showdate ] [ -/+timeelapsed ] [ -/+usefirst ] [ -/+verbose ] [ -nice level ] [ -lockdelay seconds ] [ -timeout seconds ] [ -xkblockgroup layout ] [ -font fontname ] [ -planfont fontname ] [ -bg color ] [ -fg color ] [ -background color ] [ -foreground color ] [ -username string ] [ -password string ] [ -info string ] [ -validate string ] [ -invalid string ] [ -geometry geom ] [ -icongeometry geom ] [ -glgeometry geom ] [ -/+wireframe ] [ -/+showfps ] [ -fpsfont fontname ] [ -/+fpstop ] [ -/+use3d ] [ -delta3d value ] [ -none3d color ] [ -right3d color ] [ -left3d color ] [ -both3d color ] [ -program programname ] [ -messagesfile formatted-filename ] [ -messagefile filename ] [ -message string ] [ -messagefont fontname ] [ -bitmap filename ] [ -cpasswd crypted-password ] [ -forceLogout minutes ] [ -logoutButton minutes ] [ -logoutButtonLabel textstring ] [ -logoutButtonHelp textstring ] [ -logoutFailedString textstring ] [ -/+dtsaver ] [ -/+xinerama ] [ -modulepath path ] [ -locksound string ] [ -infosound string ] [ -validsound string ] [ -invalidsound string ] [ -startCmd string ] [ -endCmd string ] [ -pipepassCmd string ] [ -logoutCmd string ]

DESCRIPTION
xlock locks the X server till the user enters their password at the keyboard. While xlock is running, all new server connections are refused. The screen saver is disabled. The mouse cursor is turned off. The screen is blanked and a changing pattern is put on the screen. If a key or a mouse button is pressed then the user is prompted for the password of the user who started xlock. If the correct password is typed, then the screen is unlocked and the X server is restored. When typing the password Control-U and Control-H are active as kill and erase respectively. To return to the locked screen, click in the small icon version of the changing pattern. In the lower part of the password screen a text is displayed. This message is taken from the first file of the following that exists: $HOME/.xlocktext, $HOME/.plan, or $HOME/.signature. On systems which support new BSD style authentication, the password may be prefixed by an authentication style followed by a colon (i.e. "style:password"). See the login.conf(5) for more information on authentication styles.

NOTE ON ETIQUETTE
Xlock should not be used on public terminals when there is a high demand for them. If you find a public terminal that has been locked by another user and there are no other terminals available, and the terminal appears to have been left idle for a while (normally more than 15 minutes), it is fair to try to reset the session in some manner.

OPTIONS

-help
    Print options and a brief description to standard output.

-version
    Print version number (if >= 4.00) to standard output.

-resources
    Print default resource file to standard output.

-display displayname
    The display option sets the X11 display to lock. xlock locks all available screens on a given server, and restricts you to locking only a local server such as unix:0, localhost:0, or :0 unless you set the -remote option.

-visual visualname
    visualname which is one of "StaticGray", "GrayScale", "StaticColor", "PseudoColor", "TrueColor", "DirectColor", or "default". default used to set the screen's default visual (the visual of the root window).

-name resourcename
    resourcename is used instead of XLock when looking for resources to configure xlock.

-mode modename
    As of this writing there are over 90 display modes supported (plus one more for random selection of one of these).

anemone
    Shows wiggling tentacles.

ant Shows Langton's and Turk's generalized ants.

ant3d
    Shows 3D ants.

apollonian
    Shows Apollonian circles.

atlantis
    Shows moving sharks/whales/dolphin. May not be available depending on how it was configured.

atunnels
    Advance GL tunnels screensaver. May not be available depending on how it was configured.

ball
    Shows bouncing balls.

bat Shows bouncing flying bats.

bevel
    Shows an auto-solving Bevel or Helicopter Cube. May not be available depending on how it was configured.

blot
    Shows Rorschach's ink blot test.

bouboule
    Shows Mimi's bouboule of moving stars.

bounce
    Shows bouncing footballs.

boxed
    Shows GL's boxed balls.

braid
    Shows random braids and knots.

bubble
    Shows popping bubbles.

bubble3d
    Shows Richard Jones's GL bubbles. May not be available depending on how it was configured.

bug Shows Palmiter's bug evolution and a garden of Eden.

clock
    Shows Packard's oclock.

coral
    Shows a coral reef.

crystal
    Shows polygons in 2D plane groups.

daisy
    Shows a meadow of daisies.

dclock
    Shows a floating digital clock or message.

deco
    Shows art as ugly as sin.

demon
    Shows Griffeath's cellular automata.

dilemma
    Shows Lloyd's Prisoner's Dilemma simulation.

dino
    Shows an auto-solving Dinosaur Cube. May not be available depending on how it was configured.

discrete
    Shows various discrete maps.

dragon
    Shows Deventer's Hexagonal Dragons Maze.

drift
    Shows cosmic drifting flame fractals.

cage
    Shows the Impossible Cage, an Escher-like GL scene. May not be available depending on how it was configured.

euler2d
    Shows a simulation of 2D incompressible inviscid fluid.

eyes
    Shows eyes following a bouncing grelb.

fadeplot
    Shows a fading plot of sine squared.

fiberlamp
    Shows a Fiber Optic Lamp.

fire
    Shows a 3D fire-like image. May not be available depending on how it was configured.

flag
    Shows a waving flag image. This may be text or a graphic image. Default text is the hostname and operating system.

flame
    Shows cosmic flame fractals.

flow
    Shows dynamic strange attractors.

forest
    Shows binary trees of a fractal forest.

fzort
    Shows a metallic-looking fzort.

galaxy
    Shows crashing spiral galaxies.

gears
    Shows GL's gears. May not be available depending on how it was configured.

glplanet
    Animates texture mapped sphere (planet)

goop
    Shows goop from a lava lamp.

grav
    Shows orbiting planets.

helix
    Shows string art.

hop Shows real plane iterated fractals.

hyper
    Shows spinning n-dimensional hypercubes.

ico Shows a bouncing polyhedron.

ifs Shows a modified iterated function system.

image
    Shows randomly appearing logos.

juggle
    Shows a Juggler, juggling.

juggle
    Shows a 3D Juggler, juggling.

julia
    Shows the Julia set.

kaleid
    Shows Brewster's Kaleidoscope.

kumppa
    Shows kumppa.

laser
    Shows spinning lasers.

life
    Shows Conway's game of life.

life1d
    Shows Wolfram's game of 1D life.

life3d
    Shows Bays' game of 3D life.

lightning
    Shows Keith's fractal lightning bolts.

lisa
    Shows animated lissajous loops.

lissie
    Shows lissajous worms.

loop
    Shows Langton's self-producing loops.

mandelbrot
    Shows mandelbrot sets.

marquee
    Shows text.

matrix
    Shows the matrix.

maze
    Shows a random maze and a depth first search solution. mball Shows an auto-solving Masterball puzzle. May not be available depending on how it was configured.

moebius
    Shows the Moebius Strip II, an Escher-like GL scene with ants. May not be available depending on how it was configured.

molecule
    Draws molecules, based on coordinates from PDB (Protein Data Base) files.

morph3d
    Shows GL morphing polyhedra. May not be available depending on how it was configured.

mountain
    Shows Papo's mountain range.

munch
    Shows munching squares.

noof
    Shows SGI Diatoms.

nose
    Shows a man with a big nose runs around spewing out text.

oct Shows an auto-solving octahedron puzzle. May not be available depending on how it was configured.

pacman
    Shows Pacman(tm).

penrose
    Shows Penrose's quasiperiodic tilings.

petal
    Shows various GCD Flowers.

petri
    Shows a mold simultation in a petri dish

pipes
    Shows a self-building pipe system. May not be available depending on how it was configured.

polyominoes
    Shows attempts to place polyominoes into a rectangle.

puzzle
    Shows a puzzle being scrambled and then solved.

pyraminx
    Shows an auto-solving Pyraminx puzzle. May not be available depending on how it was configured.

pyro
    Shows fireworks.

pyro2
    Shows other fireworks.

qix Shows spinning lines a la Qix(tm).

roll
    Shows a rolling ball.

rain
    Shows rain.

rotor
    Shows Tom's Roto-Rooter.

rubik
    Shows an auto-solving Rubik's Cube. May not be available depending on how it was configured.

sballs
    Shows balls spinning like crazy in GL. May not be available depending on how it was configured.

scooter
    Shows a journey through space tunnel and stars.

shape
    Shows stippled rectangles, ellipses, and triangles.

sierpinski
    Shows a Sierpinski's triangle.

sierpinski3d
    Shows a Sierpinski's gasket.

skewb
    Shows an auto-solving Skewb. May not be available depending on how it was configured.

slip
    Shows slipping blits.

solitaire
    Shows Klondike's game of solitaire.

space
    Shows a journey into deep space.

sphere
    Shows a bunch of shaded spheres.

spiral
    Shows a helical locus of points.

spirolateral
    Shows Odds' Spirolaterals.

spline
    Shows colorful moving splines.

sproingies
    Shows Sproingies! Nontoxic. Safe for pets and small children. May not be available depending on how it was configured.

stairs
    Shows Infinite Stairs, an Escher-like GL scene. May not be available depending on how it was configured.

star
    Shows a star field with a twist.

starfish
    Shows starfish.

strange
    Shows strange attractors.

superquadrics
    Shows 3D mathematical shapes. May not be available depending on how it was configured.

swarm
    Shows a swarm of bees following a wasp.

swirl
    Shows animated swirling patterns.

t3d Shows a Flying Balls Clock Demo.

tetris
    Shows an autoplaying tetris game.

text3d | text3d2
    Shows 3D moving texts.

thornbird
    Shows an animated Bird in a Thorn Bush fractal map.

tik_tak
    Shows rotating polygons.

toneclock
    Shows Peter Schat's toneclock.

triangle
    Shows a triangular mountain range.

tube
    Shows an animated tube.

turtle
    Shows turtle fractals.

vines
    Shows fractal-like vines.

voters
    Shows Dewdney's Voters.

wator
    Shows Dewdney's Water-Torus planet of fish and sharks.

wire
    Shows a random circuit with 2 electrons.

world
    Shows spinning Earths.

worm
    Shows wiggly worms.

xjack
    Shows Jack having one of those days.

xcl Shows a Control Line combat model race

blank
    Shows nothing but a black screen. Does not show up in random mode.

bomb
    Shows a bomb and will autologout after a time. Does not show up in random mode and may be available depending on how it was configured.

random
    Shows a random mode from above except blank (and bomb).

-delay usecs
    The delay option sets the speed at which a mode will operate. It simply sets the number of microseconds to delay between batches of animations. In blank mode, it is important to set this to some small number of seconds, because the keyboard and mouse are only checked after each delay, so you cannot set the delay too high, but a delay of zero would needlessly consume cpu checking for mouse and keyboard input in a tight loop, since blank mode has no work to do.

-count num
    The batchcount option sets number of things to do per batch to num . In anenome mode it is means nothing. In ant and ant3d modes this refers the number of ants. In apollonian mode it is the number of possible ways to embed circles within a circle, all of integer curvature. In atlantis mode it is the number of sharks. In atunnels mode it is means nothing. In ball mode it is the number of balls. In bat mode it is the number of bats, could be less because of conflicts. In bevel mode it is the number of moves. In blot mode this refers to the number of pixels rendered in the same color. In bouboule mode it is the number of stars. In bounce mode it is the number of balls, could be less because of conflicts. In braid mode it is the upper bound number of strands. In bubble mode it is the number of bubbles. In bubble3d mode it is the number of bubbles. In bug mode it is the number of bugs, could be less because of conflicts. In cage mode it is means nothing. In clock mode it is the percentage of the screen, but less than 100%. In coral mode it is the number of seeds. In crystal mode it is the number of polygons. In daisy mode it is the number flowers that make a meadow. In dclock mode it means nothing. In deco mode it is the depth. In demon mode this refers the number of colors. In dilemma mode this refers the number of initial defectors. In dino mode it is the number of moves. In discrete mode it is the number of points. In drift mode it is the number of levels to recurse (larger = more complex). In dragon mode it means nothing. In euler2d mode it is the number of segments. In eyes mode it is the number of eyes. In fadeplot mode it is the number of steps. In fiberlamp it is the number of fibers. In fire mode it is the number of fire particles (set it to 0 to have rain). In flag mode it means nothing. In flame mode it is the number of levels to recurse (larger = more complex). In flow mode it is the number of bees. In forest mode it is the number trees that make a forest. In fzort mode it means nothing. In galaxy mode it means the number of galaxies. In gears mode it is the number of degrees to rotate the set of gears by. In glplanet mode it is the number of hundredth degrees to roll the planet by. In goop mode it is the number of blobs per plane. In grav mode it is the number of planets. In helix mode it means nothing. In hop mode this refers to the number of pixels rendered in the same color. In hyper mode it the number of dimensions. In ico mode it is the ith platonic solid. In ifs mode it means nothing. In image mode it means it is the number of logos on screen at once. In juggle mode it is time in milliseconds between a throw and the next catch. In juggler3d mode it is time in milliseconds between a throw and the next catch. In julia mode it is the depth of recursion. In kaleid mode it is the number of pens. In kumppa mode it means nothing. In lament mode it means nothing. In laser mode it is the number lasers. In life and life3d modes it is the number of generations before a glider is introduced. In life1d mode it means nothing. In lisa mode it is the number of loops. In lissie mode it is the number of worms. In loop mode it is the number of flaws. In mandelbrot mode it is the order. In marquee mode it means nothing. In matrix mode it means nothing. In maze mode it means nothing. In mball mode it is the number of moves. In moebius mode it is means nothing. In molecule mode it means nothing. In morph3d mode it is the ith platonic solid. In mountain mode it is the number of mountains. In munch mode it means nothing. In noof mode it means nothing. In nose mode it means nothing. In qix mode it is the number of points. In oct mode it is the number of moves. In pacman mode it means the number of ghosts. In penrose mode it means nothing. In petal mode it the greatest random number of petals. In petri mode it means nothing. In pipes mode it shows different joints, 0 random, 1 spherical, 2 bolted elbow, 3 elbow, and 4 alternating. In polyominoes mode it means nothing. In puzzle mode it the number of moves. In pyraminx mode it is the number of moves. In pyro mode it is the maximum number flying rockets at one time. In pyro2 mode it is means nothing. In rain mode it is means nothing. In roll mode it is the number of points. In rotor mode it is the number of rotor thingys which whirr... In rubik mode it is the number of moves. In sballs mode it is the number of spheres. In scooter mode it is the number of doors. In shape mode it means nothing. In sierpinski mode it is the number of points. In skewb mode it is the number of moves. In slip mode it means nothing. In solitaire mode it means nothing. In space mode it is the number of stars. In sphere mode it means nothing. In spiral mode it is the number of spirals. In spirolateral mode it is the number of angle divisions. In spline mode it is the number of points "splined". In sproingies mode it is the number of sproingies. In stairs mode it is means nothing. In star mode it is the number of stars on the screen at once. In starfish mode it means nothing. In strange mode it means nothing. In superquadrics mode its the number of horizontal and vertical lines in the superquadric. In swirl mode it means the number of "knots". In swarm mode it is the number of bees. In t3d mode it means nothing. In tetris mode it means nothing. In text3d mode it means nothing. In thornbird mode it is the number of points. In triangular mode it is the number of mountains. In tube mode it is a rectangle (= 1), an ellipse (= 2), or a polygon if greater. In turtle mode it means nothing. In vines mode it is draw a complete vine (= 0) or a portion (= 1). In voters mode it means the number of parties, 2 or 3. In wator mode it means the breed time for the fish. In wire mode it means the length of the circuit. In world mode it is the number of worlds. In worm mode it is the number of worms. In xcl mode it represents the number of planes. In xjack mode it means nothing. In blank mode it means nothing. In bomb mode it means the number of minutes to autologout. A negative count allows for randomness. The range from the minimum allowed nonnegative count for a particular mode to the ABS( count ) (or maximum allowed count , whichever is less).

-batchcount num
    The batchcount option is deprecated but should still work as count.

-cycles num
    The cycles option sets the number of cycles until time out for ant, ant3d, apollonian, blot, braid, bug, clock, crystal, daisy, deco, demon, dilemma, discrete, dragon, eyes, fiberlamp, flag, flow, forest, galaxy, helix, hop, hyper, ico, juggle, juggler3d, laser, life, life1d, life3d, lisa, lissie, loop, mandelbrot, mountain, petal, sierpinski, shape, spline +erase, t3d, thornbird, triangle, tube, voters, wator, and wire. For atlantis it is the shark speed, for bevel it is the nuber of steps to complete a 180 degree move, for dino it is the number of steps to complete a move of 120 or 180 degrees, for euler2d and worm it is the length of the lines, for fadeplot, julia and spiral it is the length of the trail of dots, for munch it is the minimum size of the squares, for kaleid it is the % of black, for qix it is the number of lines, for spline -erase it means the number of splines * 64 (for compatibility with +erase), for gears it is the number of degrees to increment the spin of each gear by, for glplanet it is the number of hundredth degrees to rotate the planet by, for mball it is the number of steps to complete a turn, for molecule it is the time in seconds until timeout, for oct it is the number of steps to complete a move of 90 or 120 degrees, for pipes it is the number of systems to draw before clearing the screen, for pyraminx it is the number of steps to complete a move of 120 or 180 degrees, for rubik it is the number of steps to complete a 90 degree move, for sballs it is the sphere speed value, for scooter it is the speed, for skewb it is the number of steps to complete a 120 degree move, for spirolateral it is the incremental order, for superquadrics it is the number of frames it takes to morph from one shape to another. for text3d it is the number of times drawing a word before the next one, For others it means nothing.

-size num
    The size option sets the size maximum size of a star in bouboule, pyro and star, size of ball in ball and bounce, size of bat in bat, maximum size of bubble in bubble, size of clock in clock, minimum size of rectangles in deco, size of the polygons in crystal, tik_tak, and toneclock, size of polyhedron in ico, size of lissie in lissie, size of dots of flag, for kaleid it is the symmetry, width of maze hallway, size of side of penrose tile, radius of loop in lisa, radius of ball in roll, number of corners in sierpinski, number of stars in scooter, size of tube in tube, width of worm in worm, line width in rotor, size of cells in ant, bug, dilemma, dragon, life, life1d, pacman, petri, tetris, voters, wator, and wire. In pipes it is the maximum length of a system. In flow and swarm it is the length of the lines. In atlantis it is the shark size. In mball it is the number of bands. In pyraminx, oct, and rubik it is size the puzzle. A negative number allows for randomness, similar to count. In atunnels, fire, gears, sballs and sproingies it is the size of the screen (default 400), this is because on many slow systems it runs too slow when the picture covers the full screen. Set to 0 for full screen on fast machines.

-ncolors num
    The ncolors option sets the maximum number of colors to be used.

-saturation value
    The saturation option sets saturation of the color ramp used to value . 0 is grayscale and 1 is very rich color. 0.4 is a nice pastel.

-erasemode modename
    As of this writing there are over 12 erase modes supported (if its not chosen its assumed random). The erase modes are random_lines, random_squares, venetian, triple_wipe, quad_wipe, circle_wipe, three_circle_wipe, squaretate, fizzle, spiral, slide_lines, losira, no_fade. modename is now similar to the option modelist where you can it can be something like "all-losira" to get all erasemodes but losira. Use a "+" or a "," to add modes like "spiral+venetian".

-erasedelay usecs
    The erasedelay option sets the number of microseconds for steps of the erasemode (a setting of 0 and the erasemode is bypassed).

+/-nolock
    The nolock option causes xlock to only draw the patterns and not lock the display. A key press or a mouse click will terminate the screen saver.

-/+inwindow
    Runs xlock in a window, so that you can iconify, move, or resize it and still use your screen for other stuff. When running in a window, xlock no longer locks your screen, it just looks good.

-/+inroot
    Runs xlock in your root window. Like the inwindow option it no longer locks the screen, it just looks good.

-/+remote
    The remote option tells xlock to not stop you from locking remote X11 servers. This option should be used with care and is intended mainly to lock X11 terminals which cannot run xlock locally. If you lock someone else's workstation, they will have to know your password to unlock it. Using +remote overrides any resource derived values for remote and prevents xlock from being used to lock other X11 servers. (Use `+' instead of `-' to override resources for other options that can take the `+' modifier similarly.)

-/+mono
    The mono option causes xlock to display monochrome, (black and white) pixels rather than the default colored ones on color displays.

-/+allowaccess
    This option is required for servers which do not allow clients to modify the host access control list. It is also useful if you need to run x clients on a server which is locked for some reason... When allowaccess is true, the X11 server is left open for clients to attach and thus lowers the inherent security of this lock screen. A side effect of using this option is that if xlock is killed -KILL, the access control list is not lost.

-vtlock modename
    This option is used on a XFree86 system to manage VT switching in [off|noswitch|switch|restore] mode.

off means no VT switch locking.

switch
    means VT switch locking + switching to xlock VT when activated.

restore
    means VT switch locking + switching to xlock VT when activated + switching back to previous VT when deactivated.

noswitch
    means VT switch locking only when xlock VT is active.

-/+allowroot
    The allowroot option allows the root password to unlock the server as well as the user who started xlock. May not be able to turn this on and off depending on your system and how xlock was configured.

-/+debug
    Allows xlock to be debugged by doing all but locking the screen.

-/+description
    The description option causes xlock shows a mode description above password window. The default is to show this description.

-/+echokeys
    The echokeys option causes xlock to echo '?' characters (default) for each key typed into the password prompt. Some consider this a security risk, so the default is to not echo anything.

-echokey echokey
    The text character to use for echo key in echokeys .

-/+enablesaver
    By default xlock will disable the normal X server's screen saver since it is in effect a replacement for it. Since it is possible to set delay parameters long enough to cause phosphor burn on some displays, this option will turn back on the default screen saver which is very careful to keep most of the screen black.

-/+resetsaver
    By default xlock will call XResetScreenSaver. This may be undesirable with DPMS monitors.

-/+grabmouse
    The grabmouse option causes xlock to grab the mouse and keyboard, this is the default. xlock can not lock the screen without this.

-/+grabserver
    The grabserver option causes xlock to grab the server. This is not usually needed but some unsecure X servers can be defeated without this.

-/+install
    Allows xlock to install its own colormap if xlock runs out of colors. May not work on with some window managers (fvwm) and does not work with the -inroot option.

-/+mousemotion
    Allows you to turn on and off the sensitivity to the mouse to bring up the password window.

-/+sound
    Allows you to turn on and off sound if installed with the capability.

-/+showdate
    Allows you to turn on and off the date on password window. On by default.

-/+timeelapsed
    Allows you to find out how long a machine is locked so you can complain to an administrator that someone is hogging a machine.

-/+usefirst
    The usefirst option causes xlock to use the keystroke which got you to the password screen as the first character in the password. The default is to ignore the first key pressed.

-/+verbose
    Verbose mode, tells what options it is going to use.

-nice nicelevel
    The nice option sets system nicelevel of the xlock process to nicelevel .

-lockdelay seconds
    The lockdelay option sets the number of seconds before the screen needs a password to be unlocked. Good for use with an autolocking mechanism like xautolock(1).

-timeout seconds
    The timeout option sets the number of seconds before the password screen will time out.

-font fontname
    The font option sets the font to be used on the prompt screen.

-planfont fontname
    option sets the font to be used for the text that is displayed in the lower part of the password screen.

-fg color
    The fg option sets the color of the text on the password screen to color .

-bg color
    The bg option sets the color of the background on the password screen to color .

-foreground color
    The foreground option sets the color of the text on the password screen to color .

-background color
    The background option sets the color of the background on the password screen to color .

-username string
    Text string is shown in front of user name, defaults to "Name: ".

-password string
    Text string is the password prompt string, defaults to "Password: ".

-info string
    Text string is an informational message to tell the user what to do, defaults to "Enter password to unlock; select icon to lock.".

-validate string
    Text string is a message shown while validating the password, defaults to "Validating login..."

-invalid string
    Text string is a message shown when password is invalid, defaults to "Invalid login."

-geometry geom
    The geometry option sets geom the size and offset of the lock window (normally the entire screen). The entire screen format is still used for entering the password. The purpose is to see the screen even though it is locked. This should be used with caution since many of the modes will fail if the windows are far from square or are too small (size must be greater than 0x0). This should also be used with -enablesaver to protect screen from phosphor burn.

-icongeometry geom
    The icongeometry option sets geom the size of the iconic screen (normally 64x64) seen when entering the password. This should be used with caution since many of the modes will fail if the windows are far from square or are too small (size must be greater than 0x0). The greatest size is 256x256. There should be some limit so users could see who has locked the screen. Position information of icon is ignored.

-glgeometry geom
    The glgeometry option sets geom the size of the screen for gl modes. Not normally available or needed.

-/+wireframe
    Turn on/off wireframe, available on ant3d, atlantis, atunnels, daisy, fire, gears, lament, life3d, mountain, sballs, sproingies, superquadrics, and triangle.

-/+showfps
    Turn on/off frame per sec display, available on atlantis, atunnels, bevel, dino, bubble3d, cage, fire, gears, invert, lament, moebius, morph3d, mball, oct, pyraminx, rubik, sballs, skewb, stairs, and superquadrics.

-/+fpstop
    Turn on/off frame per sec display on top of screen, used if showfps is on.

-fpsfont fontname
    The fpsfont option sets the font to be used in the frame per sec display, used if showfps is on.

-/+use3d
    Turn on/off 3d view, available on bouboule, pyro, star, and worm.

-delta3d value
    Space between the center of your 2 eyes for 3d mode.

-none3d color
    Color used for empty size in 3d mode.

-right3d color
    Color used for right eye in 3d mode.

-left3d color
    Color used for left eye in 3d mode.

-both3d color
    Color used for overlapping images for left and right eye in 3d mode.

-program programname
    The program option sets the program to be used as the fortune generator. Currently used only for marquee and nose modes.

-messagesfile formatted-filename
    The messagesfile option sets the file to be used as the fortune generator. The first entry is the number of fortunes, the next line contains the first fortune. Fortunes begin with a "%%" on a line by itself. Currently used only for marquee and nose modes. If one exists, it takes precedence over the fortune program.

-messagefile filename
    The messagefile option sets the file whose contents are displayed. Currently used only for marquee and nose modes. If one exists, it takes precedence over the fortune program and messagesfile.

-message textstring
    The message option sets the text to be displayed in a mode. Currently used only for flag, marquee and nose modes. If one exists, it takes precedence over the fortune program, messagesfile and message.

-messagefont fontname
    The messagefont option sets the font to be used in the mode. Currently used only for flag, marquee, and nose modes.

-bitmap filename
    The bitmap option sets the xbm, xpm, or ras file to be displayed with flag, image, life, life1d, maze, or puzzle mode. For eyes and pacman only a xbm file is accepted. Certain modes reject the bitmap if too big. /

MORE OPTIONS (these may not be available)

-cpasswd crypted-password
    The cpasswd option sets the key to be this text string to unlock xlock instead of password file.

-forceLogout minutes
    The forceLogout option sets minutes to auto-logout.

-logoutButton minutes
    The logoutButton option sets minutes to logoutButton is available on password screen.

-logoutButtonLabel string
    Text string is a message shown inside logout button when logout button is displayed. Defaults to "Logout".

-logoutButtonHelp string
    Text string is a message shown outside logout button when logout button is displayed. Defaults to "Click the \"Logout\" button to log out current\n user and make workstation available."

-logoutFailedString string
    Text string is a message shown when a logout is attempted and fails. Defaults to "Logout attempt FAILED.\n Current user could not be automatically logged out."

-/+dtsaver
    Turn on/off CDE Saver Mode. This option is only available if CDE support was compiled in.

-/+xinerama
    Turn on/off Xinerama. This option is only available if Xinerama support was compiled in.

-modulepath path
    The modulepath option sets the directories that xlock searches for mode modules to load. It is a colon separated list of directories to search. If "%S" is included in the path, it is replaced by the default modulepath. To add a private module directory to the default path, use something like '%S:~/mymoduledir' as the path. This option is only available if module support was compiled in.

-locksound string
    Text string references sound to use at lock time. Default sound, male voice: "Thank you, for your cooperation."

-infosound string
    Text string references sound to use for information. Default sound, male voice: "Identify please."

-validsound string
    Text string references sound to when a password is valid. Default sound, female voice: "Complete."

-invalidsound string
    Text string references sound to when a password is invalid. Default sound, female voice: "I am not programmed to give you that information."

-startCmd string
    Text string command to execute when the screen is locked. Commonly used instructions include: "zaway". This command, if still running when the screensaver exits, will be killed.

-endCmd string
    Text string command to execute when the screen is unlocked.

-pipepassCmd string
    Text string command into which to pipe the password when the screen is unlocked.

-logoutCmd string
    Text string command to execute when the program logs the user out (either via the autologout or by pressing the logout button).

-mailCmd string
    Text string command to execute when the program to check mail.

-mailIcon string
    Text string of file for the "mail arrived" bitmap.

-nomailIcon string
    Text string of file for the "no mail" bitmap.

-dpmsstandby  seconds
    Allows one to set DPMS Standby for monitor (0 is defined as infinite). (Horizontal sync on, Vertical sync off, RGB guns off, power supply on, tube filaments energized, (screen saver mode). Typical 17 inch screen... 110 out of 120 watts with a 3 sec recovery time.) This option is only available if DPMS support was compiled in. Minimum timeout is 5 seconds.

-dpmssuspend  seconds
    Allows one to set DPMS Suspend for monitor (0 is defined as infinite). (Horizontal sync off, Vertical sync on, RGB guns off, power supply off, tube filaments energized. Typical 17 inch screen ... 15 out of 120 watts with a 3 sec recovery time.) This option is only available if DPMS support was compiled in. Minimum timeout is 5 seconds.

-dpmsoff  seconds
    Allows one to set DPMS Power Off for monitor (0 is defined as infinite). (Horizontal sync off, Vertical sync off, Small auxiliary circuit stays on to monitor the HS/VS signals to enable power on when data needs to be displayed on the screen. Typical 17 inch screen ... 5 out of 120 watts with a 10 sec recovery time.) This option is only available if DPMS support was compiled in. Minimum timeout is 5 seconds.

SPECIAL MODE DEPENDENT OPTIONS

-neighbors num
    The neighbors option sets the number of neighbors of a cell to 3, 4, 6, 9 (may not have real mathematical meaning), or 12 for several automata modes (ant, bug, demon, dilemma, life, loop, voters, wator, and wire) (bug and loop do not span this full range). Setting it to 0 typically randomizes this, except where bitmaps are used (dilemma, life, voters, and wator).

-/+eyes
    Turn on and off eyes for ant, ant3d, and bug.

-/+cycle
    Turn on and off colour cycling in crystal, lyapunov, mandelbrot, starfish, swirl, tetris, tik_tak, toneclock, and tube.

-/+label
    Turn on and off alternate space and number labeling in apollonian. For ant and ant3d this turns on and off the labeling of the rule. For life and life3d this turns on and off the labeling of the pattern name and rule.

-/+serial
    Turn on and off sequential allocation of colors in kaleid. For life and life3d this turns on and off the picking of sequential patterns (to be used with middle button of the mouse).

-/+trackmouse
    Turn on and off mouse interaction in eyes, fire, julia, solitaire, sballs, swarm, and tetris. For maze, pacman, solitaire and tetris this may not be available depending on how xlock was configured.

-/+texture
    Turn on and off texturing in fire, lament and sballs. This may not be available depending on how xlock was configured.

-rule <rule>
    The rule string is defined as B<neighborhood>/S<neighborhood> for life and life3d. Special parameters: P, picks a random rule from all rules that have known patterns; G, picks a random rule from all rules that have known gliders. For life a good example is Conway's rule which is B3/S23. Others are B36/S23 and B3678/S34678. For life3d good examples are Bay's rules which are B5/S45, B6/S567, B5/S56, and B67/S67. The rule string is defined as a binary string (requires at least one 1 and one 0) for ant and a base 4 (or quadranary) string (requires 3 of 4 digits to be represented) for ant3d. Here a special parameter, T and then a number, will pick a specific table.

-lifefile filename
    The lifefile option sets the life and life3d lifeform. Only one format is currently supported, similar to the #P xlife format. For life3d, 2 linefeeds in a row are assumed to advance the depth.

-arms num
    Allows one to set the number of arms in anemone.

-finpoints num
    Allows one to set the width of the arms in anemone.

-width num
    Allows one to set the final number of points in each array of anemone.

-withdraws num
    Allows one to set the withdraw frequency in

anemone.
    -turnspeed num Allows one to set the turning speed in

-/+truchet
    Turn on and off Truchet lines (trail) in ant.

-/+altgeom
    Turn on and off alternate geometries (off euclidean space, on includes spherical and hyperbolic) in apollonian mode.

-whalespeed num
    Allows one to set the speed of the whales and dolphin in atlantis.

-/+boil
    Turn on and off having the bubbles bubble up in bubble.

-nx num
    Allows one to set the number of unit cells in x-direction in crystal.

-ny num
    Allows one to set the number of unit cells in y-direction in crystal.

-/+centre
    Turn on and off the centering on screen in crystal.

-/+maxsize
    Turn on and off the centering on screen in crystal.

-/+cell
    Turn on and off the drawing of unit cell in crystal.

-/+grid
    Turn on and off the drwing of grid of unit cells (if -cell is on) in crystal.

-/+garden
    Turn off and on garden look in daisy.

-/+binary
    Turn on and off the binary clock in dclock.

-/+led
    Turn on and off the led clock in dclock.

-/+popex
    Turn on and off the population explosion counter in dclock.

-/+forest
    Turn on and off the tropical deforest (hectares/acres) counter in dclock.

-/+hiv
    Turn on and off the HIV infection counter in dclock.

-/+lab
    Turn on and off the Animal Research counter in dclock.

-/+veg
    Turn on and off the Animal Consumation counter in dclock.

-/+y2k
    Turn on and off the Year 2000 countdown in dclock.

-/+millennium
    Turn on and off the Second Millennium (January 1, 2001) countdown in dclock.

-bonus value
    Allows one to set the bonus for cheating... between 1.0 and 4.0 in dilemma.

-/+conscious
    Turn off and on self-awareness in dilemma.

-/+grow
    Turn on and off growing fractals (else they are animated) for drift.

-/+liss
    Turn on and off using lissajous figures to get points for drift.

-/+fog
    Turn on and off fog for fire.

-/+shadows
    Turn on and off shadows for fire.

-trees num
    Validate the displaying of trees for fire if greater than zero.

-/+invert
    Turn on and off inverting of the flag.

-/+rotate
    Turn on/off rotating around attractor in flow.

-/+ride
    Turn on/off rideing in the flow.

-/+box
    Turn on/off bounding box in flow.

-/+periodic
    Turn on/off periodic attractors in flow.

-/+search
    Turn on/off search for new attractors in flow.

-/+dbuf
    Turn on/off double buffering in flow.

-/+tracks
    Turn on and off star tracks in galaxy.

-/+light
    Turn on and off lighting of the planet for glplanet.

-/+bounce
    Turn on and off bouncing movement of the planet for glplanet.

-pimage filename
    Use the named xbm or xpm file for texturing the planet for glplanet. Use BUILTIN as filename for the builtin image taken from Xearth.

-/+roll
    Turn on and off rolling of the planet for glplanet.

-/+rotate
    Turn on and off rotation of the planet for glplanet.

-/+texture
    Turn on and off texturing of the planet for glplanet.

-/+stars
    Turn on and off showing stars in the background for glplanet.

-/+decay
    Turn on and off decaying orbits for grav.

-/+trail
    Turn on and off decaying trail of dots for grav.

-/+ellipse
    Turn on and off ellipse format in helix.

-/+martin
    Turn on and off Barry Martin's square root hop.

-/+popcorn
    Turn on and off Clifford A. Pickover's popcorn hop.

-/+ejk1...ejk6
    Turn on and off Ed J. Kubaitis' hops.

-/+rr
    Turn on and off Renaldo Recuerdo's hop.

-/+jong
    Turn on and off Jong's hop.

-/+sine
    Turn on and off Barry Martin's sine hop.

-pattern <pattern>
    Allows one to set the pattern for juggle.

-tail num
    Minimum Trail Length for juggle.

-/+real
    Turn on/off real-time juggling for juggle. Deprecated. There should be no need to turn off real-time juggling, even on slow systems. Adjust speed using -count.

-/+describe
    Turn on/off pattern descriptions in juggle.

-/+balls
    Turn on/off Balls in juggle.

-/+clubs
    Turn on/off Clubs in juggle.

-/+torches
    Turn on/off Flaming Torches in juggle.

-/+knives
    Turn on/off Knives in juggle.

-/+rings
    Turn on/off Rings in juggle.

-/+bballs
    Turn on/off Bowling Balls in juggle.

-/+planetary
    Turn on and off planetary gears in gears.

-planetsize num
    Sets the size of the screen for planetary option in gears. This is for machines with slower CPU. (Set to 0 for full screen).

-/+disconnected
    Turn on and off disconnected pen movement in kaleid.

-/+alternate
    Turn on and off alternate rotated display mode kaleid.

-/+quad
    Turn on and off quad mirrored/rotated mode similar to size 4 in kaleid.

-/+oct
    Turn on and off oct mirrored/rotated mode similar to size 8 in kaleid.

-/+linear
    Turn on and off Cartesian/Polar coordinate mode in kaleid.

-/+conway
    Turn on and off John Conway's original Life rule B3/S23 life.

-/+highlife
    Turn on and off David Bell's HighLife rule B36/S23 life.

-/+daynight
    Turn on and off Nathan Thompson's Day and Night rule B3678/S34678 life.

-/+callahan
    Turn on and off Paul Callahan's B2o/S2m34 hexagonal life.

-/+andreen
    Turn on and off Bob Andreen's B2o3o4m/S2om4o hexagonal life.

-/+trilife
    Turn on and off Carter Bays' B45/S34 triangular life.

-/+trilife1
    Turn on and off Carter Bays' B456/S45 triangular life.

-/+trilife2
    Turn on and off Carter Bays' B45/S23 triangular life.

-/+totalistic
    Turn on and off totalistic rules for life1d. If this is off then it follows rules of the LCAU collection. These rules may not be symmetric and are more general.

-/+additive
    Turn on and off additive functions mode in lisa.

-/+dissolve
    Turn on and off disolving state in loop.

-/+evolve
    Turn on and off Evolving Loops in loop.

-/+langton
    Turn on and off Langton Loops for loop.

-/+sheath
    Turn on and off sheath extension for loop.

-/+wrap
    Turn on and off wrapping of borders for loop.

-increment num
    Sets the option for increasing orders in mandelbrot.

-/+alpha
    Turn on and off interior displaying level of closest return in mandelbrot.

-/+binary
    Turn on and off binary decomposition color modulation in mandelbrot.

-/+dem
    Turn on and off Distance Estimator Method (instead of escape time) in mandelbrot.

-/+index
    Turn on and off interior displaying iteration of closest return in mandelbrot.

-/+lyap
    Turn on and off interior displaying according to an estimate of the Lyapunov exponent in mandelbrot.

-/+pow
    Turn on and off adding z^z in mandelbrot.

-/+sin
    Turn on and off adding sin(z) in mandelbrot.

-/+noants
    Turn off and on ants in moebius.

-/+solidmoebius
    Turn on and off solid Mobius strip in moebius.

-/+atoms
    Turn on and off the drawing of spheres for the atoms in molecule.

-/+bbox
    Turn on and off showing the molecules in a blue box in molecule.

-/+bonds
    Turn on and off the drawing of the atomic bonds in molecule.

-molecule filename
    Read a molecule structure from a pdb file in molecule.

-/+labels
    Turn on and off the labeling of the atoms in molecule.

-spin{x|y|z}
    Set the axis for molecule rotation in molecule. The default is "XYZ".

+spin
    Turn off the molecule rotation in molecule.

-/+titles
    Turn on and off the molecule description in molecule.

-/+wander
    Turn on and off the moving of the molecule on a sinoid curve in molecule. Turn on and off movements in fire.

-/+ammann
    Turn on and off lines for penrose.

-increment value
    Allows fine adjustments to order in mandelbrot.

-/+erase
    Turn on and off erasing for spline. If this option is on, cycles is divided by 64 to compute the number of lines, so as to be compatible when using -fullrandom.

-factory num
    Number of extra factory parts in pipes.

-/+fisheye
    Turn on if you want a zoomed-in view of pipes.

-/+tightturns
    Turn on if you want the pipes to bend more often.

-/+rotatepipes
    Turn on if you want the pipe system rotated in pipes.

-/+complete
    Turn on or off complete graph morphing in qix.

-msg textstring
    Allows one to pass different explosion elements to pyro2. The explosion types is one of &0, &1, ... &9, &a, ... &f each of which presents a different type of explosion. Normal text can be sent, the string may contain blanks if quoted. An operation system logo will be shown, if the # sign is sent.

-fnt font
    Allows one to pass different elements to pyro2.

-size[xyz] num
    Number represents the number of cubies on the x, y, or z axis. Negative numbers offer randomness from 2 to the absolute value of the number. star.

-/+hideshuffling
    Turn on or off hidden shuffle phase for bevel, dino, mball, oct, pyraminx, rubik and skewb.

-/+border
    Turn on or off borders in shape.

-/+shadowing
    Turn on or off shadowing in shape.

-/+stippling
    Turn on or off stippling in shape.

-intensity value
    Set the brightness (default 2185) of the sierpinski structure for sierpinski3d.

-maxdepth value
    Set the maximum depth (up to 10) of the sierpinski structure for sierpinski3d.

-speed value
    Determines after how much steps the depth changes for sierpinski3d.

-sharpness num
    Random by default, will give sharper turns if possible for spirolateral.

-trek num
    If its a high number you will see the space ship all the time in star.

-/+rock
    Turn on and off rocks for star. If this is off, stars will be seen instead.

-/+straight
    Turn on if star gets you motion sick.

-cyclepeed num
    Set speed of cycling in starfish.

-rotation num
    Set rotation velocity in starfish.

-thickness num
    Set thickness in starfish.

-/+rock
    Turn on and off blob for starfish.

-curve num
    Set the curve factor of the attractors for strange.

-points num
    Change the number of points/iterations each frame for strange.

-point-size num
    Change the size of individual points for strange.

-zoom float
    Zoom in or out for strange.

-brightness float
    Adjust the brightness for accumulator mode for strange.

-motion-blur float
    Adds motion blur for strange.

-spinspeed num
    Set speed of rotation, in degrees per frame for superquadrics.

-/+bonus
    Turn on in tetris to see 5 square bonus pieces.

-/+well
    Turn on in tetris to see welltris.

-ttfont filename
    Sets the True Type font file (or font directory) used for text3d

-extrusion num
    Sets length of the text extrusion for text3d

-rot_amplitude float
    Sets rotation amplitude value of each letter for text3d

-rot_frequency float
    Sets rotation frequency for text3d

-/+no_split
    Turn on and off word splitting for text3d

-ttanimate function_name
    Sets the animation function used for text3d. Currently one of : Random FullRandom Default Default2 None Crazy UpDown Extrude RotateXY RotateYZ Frequency Amplitude

-speed km/h
    The speed for all planes in km/h for xcl.

-frametime microseconds
    The time for one frame on the screen. This time is used to calculate the delay time and depends on the speed of the X server for xcl.

-line_length mm
    The distance between the pilot and the plane for xcl.

-spectator mm
    The distance between spectator and pilot. It should be grater than the line_length and the half wing width of the plane to be not dangerous for the spectator for xcl.

-viewmodel
    Shows an animated view of one model for xcl.

-/+oldcolor
    Sets the colors for the first two planes fixed to red and yellow in xcl.

-xcldebug
    Shows some additional timing information to make sure that the calibrate procedure goes right in xcl.

-automatic
    The auto scale for automatic fit into the window is Deactivated with this option for xcl.

-randomstart
    Use a random start point for models at startup for xcl.

-duration seconds
    Allows one to set a duration for a mode in random. Duration of 0 is defined as infinite.

-/+fullrandom
    Turn on/off randomness options within modes in random. Not implemented for all mode options.

-modelist textstring
    Allows one to pass a list of files to randomly display to random. "all" will get all files but blank (and bomb if compiled in). "all,blank" will get all modes. "all,-image bounce,+blank" will get all modes excluding image and bounce modes. "bug wator" will get only bug and wator. "allgl" will get only the GL modes if compiled in, all-allgl will get all excluding the GL modes, "allnice" will weed out high cpu usage modes (as well as hackers and gl modes). "allxpm" will get all modes that use xpm. "allwrite" will get all modes that take advantage of writable colormaps (not including xpm). "all3d" will get all the modes that support this option. "allmouse" will get all the modes that support mouse interaction. Similarly, "allautomata" for automata modes, "allfractal" for fractal modes, "allgeometry" for geometry modes, "allspace" for space modes. The random mode itself can not be referenced.

-/+sequential
    Turn on non-random random option.

**WARNING**
xlock can appear to hang if it is competing with a high-priority process for the CPU. For example, if xlock is started after a process with 'nice -20' (high priority), xlock will take considerable amount of time to respond.

SHADOW PASSWORDS
If the machine is using a shadow password system, then xlock may not be set up to get the real password and so must be given one of its own. This can be either on the command line, via the -cpasswd option, or in the file $HOME/.xlockrc, with the first taking precedence. In both cases an encrypted password is expected (see makekey(8)). If neither is given, then xlock will prompt for a password and will use that, also storing an encrypted version of it in $HOME/.xlockrc for future use.

XLOCK AND SSH-AGENT
If you use ssh-agent(1) to avoid entering a passphrase every time you use one of your ssh(1) private keys, it's good security practice to have ssh-agent forget the keys before you leave your terminal unattended. That way, an attacker who takes over your terminal won't be able to use your private ssh keys to log in to other systems. Once you return to your terminal, you can enter the passphrase and re-add the keys to ssh-agent. There are a couple of ways in which xlock can help to automate this process. Firstly, the startCmd option allows xlock to be configured to run 'ssh-add -D' every time you lock the screen, so that your keys are automatically deleted from ssh-agent. If the passphrase on your ssh keys is the same as your password, then xlock can also be made to re-add the keys to ssh-agent when you unlock the screen, via the pipepassCmd option. This requires a bit of scripting, as the command must read your password from standard input and then automate the interaction with ssh-add to re-add the keys. There is an example of such a script in the xlock distribution - see etc/xlockssh*

BUGS
"kill -KILL xlock " causes the server that was locked to be unusable, since all hosts (including localhost) were removed from the access control list to lock out new X clients, and since xlock could not catch SIGKILL, it terminated before restoring the access control list. This will leave the X server in a state where "you can no longer connect to that server, and this operation cannot be reversed unless you reset the server."
        -From the X11R4 Xlib Documentation, Chapter 7.
NCD terminals do not allow xlock to remove all the hosts from the access control list. Therefore you will need to use the "-remote" and "-allowaccess" switches. If you happen to run without "-allowaccess" on an NCD terminal, xlock will not work and you will need to reboot the terminal, or simply go into the SETUP menus, under 'Network Parameters', and turn off TCP/IP access control.

SEE ALSO
X(1), Xlib Documentation.

AUTHOR
Maintained by:
    David A. Bagley, <bagleyd AT verizon.net>

The latest version is currently at:
    https://www.sillycycle.com/xlock/
    http://www.ibiblio.org/pub/Linux/X11/screensavers/

Original Author:
    Patrick J. Naughton, <naughton AT eng.sun.com>
    Mailstop 21-14
    Sun Microsystems Laboratories, Inc.
    Mountain View, CA 94043
    415/336-1080

with many additional contributors.

COPYRIGHT
Copyright (c) 1988-1991 by Patrick J. Naughton
Copyright (c) 1993-2024 by David A. Bagley

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation.

This file is provided AS IS with no warranties of any kind. The author shall have no liability with respect to the infringement of copyrights, trade secrets or any patents by this file or any part thereof. In no event will the author be liable for any lost revenue or profits or
 other special, indirect and consequential damages.
The original BSD daemon is Copyright (c) 1988 Marshall Kirk McKusick. All Rights Reserved.
DEC, HP, IBM, Linux, SCO, SGI, and Sun icons have their respective copyrights.