## Capítulo 9. Text Management

## 1. Gestão de textos

Text is managed with the Text tool. This tool creates a new layer containing the text, above the current layer in the Layers dialog, with the size of the text box. Its name is the beginning of the text.

Figura 9.1. Exemplo de um item de texto

Exemplo de um item de texto, mostrando o limite da camada de texto. (Fonte: Utopia Bold)

The Layers dialog, with the text layer above the layer which was current.

Text can be edited directly on canvas. A text tool box, which shows up on top of the canvas above the text box, allows you to quickly change some of the text characteristics.

| Nota
The settings you change in this on canvas dialog only apply to the parts of the text that are selected, or any new text you type after the current cursor position.

When you click on the canvas with the Text tool, an empty text box appears with a semi-transparent dialog above it. The empty text box is where your text will appear when you start typing.

As opções da ferramenta de texto estão descritas em Secção 5.3, “Text”.

### 1.1. Área de texto

To enter text start typing. The text box will enlarge gradually. Press Enter to add a new line.

You can also enlarge the text box by click-and-dragging, as you do with selections. While dragging, the size of the text area will be shown in the status bar at the bottom of the image window.

To edit text properties first select the part you want to change by click-and-dragging, or by using Shift+arrow keys. Then use the options of the Secção 1.3, “Text Toolbox” to change the selected text.

Em vez de usar a edição de texto na tela de pintura, você pode usar o editor de texto descrito em Secção 5.3.3, “Text Editor”.

To move the text on the image use the Move Tool. Note that by default you must click on a visible part of the text to move the text layer.

Você pode editar o texto mais tarde, se a camada de texto ainda existir e não tiver sido modificada por outra ferramenta (veja abaixo): torne a camada de texto ativa no diálogo de Camadas, selecione a ferramenta Texto e clique sobre o texto na janela de imagem.

#### 1.1.1. Entering Unicode Characters

It can be useful to enter characters that are not easily available on your keyboard. How you enter these Unicode characters depends on your Operating System.

Linux

  You can enter Unicode characters with the keyboard shortcut Ctrl+Shift+U followed by the hexadecimal number of the desired character and then pressing Enter.

macOS

  Use the Character Viewer, shortcut Ctrl+Cmd+Space to find and insert symbols, or enable the Unicode Hex Input keyboard in Keyboard settings. With the Unicode Hex Input active, hold the Option key and type the character's hexadecimal code to insert it.

Janelas

  If you know the number of the character, you can enter that character by pressing and holding the left Alt followed by the number using the numbers on the keypad, and then releasing the Alt key. This only works for a limited set of characters.

  Alternatively you can select a character or emoji by opening a dialog using the shortcut Windows-key+.. By default emojis are shown, but you can change that to symbols using the tabs at the top, and then further select a category with the tabs at the bottom.

  The third option is by opening the Character Map application that is part of Windows and select the desired character from there.

Of course this feature is more useful for entering special (even exotic) characters, provided that the required glyphs for these characters are supplied by the selected font only few fonts support Klingon. ;-)

Unicode 0x47 (“G”), 0x2665, 0x0271, 0x03C0

### 1.2. Gerenciando a camada de texto

Você pode operar em uma camada de texto da mesma forma que qualquer outra camada, mas isso muitas vezes significa abrir mão da capacidade de editar o texto, sem perder os resultados de seu trabalho.

Compreender algumas das idiossincrasias sobre manipulação de texto, podem ajudar a compreender que uma camada de texto contém mais informação do que os dados de pixel que você vê: ela também contém uma representação do texto em um formato de editor de texto. Você pode ver isso na janela do editor de texto que aparece enquanto você estiver usando a ferramenta Texto. Toda vez que você alterar o texto, a camada da imagem é redesenhada para refletir as alterações.

Agora suponha que você crie uma camada de texto, e em seguida opere sobre ela, de alguma forma que não envolva a ferramenta Texto: gire-a, por exemplo. Suponha que você, em seguida, volte e tente editá-lo usando a ferramenta Texto. Assim que você editar o texto, a ferramenta de texto irá redesenhar a camada, acabando com os resultados das operações que você realizou anteriormente.

Como esse perigo não é óbvio, a ferramenta de texto tenta protegê-lo dele. Se você operar em uma camada de texto, e depois tentar editar o texto, aparece uma mensagem avisando que suas alterações serão desfeitas, e lhe oferece três opções:

- editar o texto mesmo assim;

- cancelar;

- criar uma nova camada de texto com o mesmo texto que a camada existente, deixando a camada existente inalterada.

Figura 9.2. Aviso de modificações que serão perdidas

### 1.3. Text Toolbox

Figura 9.3. Text Toolbox

An on-canvas text toolbar appears when you click on the canvas with the Text Tool, right above the location where you type your text. It allows you to change most common text settings directly on canvas. The toolbar can be moved to a different position if it is in the way.

Besides the usual text formatting features like font family, size, style and text color, you get control over baseline offset and kerning.

| Nota
Beware that all the settings on this toolbar only work on the currently selected text. That way you can use different styles for different parts of your text.

- The icon on the left side shows the area on the toolbar that you can grab to drag the toolbar to a different location.

- When the toolbar has been moved from its original location, it can be restored to that location by using the icon on the top right side of the toolbar. This icon is only visible if the toolbar has been moved.

- Change font of selected text: as soon as you start editing the default font name, a drop-down list appears, allowing you to select a font.

- Change size of selected text: changes the font size of the selected text. The unit drop-down next to it can be used to change the type of unit used for the text size.

- Clear style of selected text: use this to remove all text styling that was applied to the selected text.

- Bold, Italic, Underline, Strikethrough: toggles the markup for the selected text.

  While editing, shortcut keys can be used for Bold (Ctrl+B), Italic (Ctrl+I) and Underline Ctrl+U.

- Change baseline of selected text: “In European typography and penmanship, baseline is the line upon which most letters "sit" and below which descenders extend” (Wikipedia). In HTML, there are several kinds of baselines (alphabetic, ideographic, bottom…). Here, consider that baseline is "bottom" and determines the place for descenders. The default baseline "0" gives place for descenders. You can use it to increase space between two lines only, while “Adjust line spacing” in tool options increases space between all lines.

  Figura 9.4. Default Baseline

  Default baseline marked with a red line.

- Change kerning of selected text: “In typography, kerning… is the process of adjusting the spacing between characters in a proportional font.” (Wikipedia). You can use this setting to adjust letter spacing of a selected part of text.

  Let us look at a selected text (zoomx800 to see pixels):

  Figura 9.5. Example of Selected Text

  We can see that the Sans font is a proportional font: letters widths are different, and “T” glyph comes over the “e”. Letters widths are marked with thin vertical lines and left borders of letter width cover preceding letters by one pixel. Now we set “Change kerning of selected text” to 2 pixels:

  Figura 9.6. Example of Text Kerning

  Blank spaces, 2 pixels wide, are added between all selected characters and letter widths are preserved. If no text is selected, a blank space is added at the place of the mouse pointer between two characters.

  Here is a comparison with the Adjust letter spacing option of the Text tool:

  Figura 9.7. Example of Text Spacing

  The option applies to the whole text, not only to the selected text. Blank spaces are added inside letters widths and letter widths are not respected.

- You can also use Alt+arrow keys to change baseline offset and kerning.

- Change color of selected text: this command opens a color dialog where you choose a color for the selected text.

### 1.4. Text Context Menu

The context menu can be brought up by right-clicking on text. It is somewhat different from that of the Text Editor dialog.

The context menu offers the following options:

- Cut, Copy, Paste, Delete: these commands work with selected text. Except for Paste, they are disabled as long as no text is selected. Paste is enabled when the clipboard contains text.

- Paste unformatted text: paste text from the clipboard without any markup.

- Restore On-Canvas Editor Position: changes the position of the On-Canvas Editor to its original location. This is disabled when it already is in the original location.

- Open text file…: this command opens a file dialog where you can select a text file. The contents of this file will be opened in the current text layer.

- Limpar: este comando exclui todo o texto, selecionado ou não.

- Text to Path: this command creates a path from the outlines of the current text. The result is not evident. You have to open the Paths dialog and make path visible. Then select the Path tool and click on the text. Every letter is now surrounded with a path component. So you can modify the shape of letters by moving path control points.

  Este comando é similar ao Camada → Texto para vetor.

  Figura 9.8. Text to path applied

  Nothing appears.

  Figura 9.9. Path made visible

  Path made visible in Path tab. Path appears as a red border around text.

  Figura 9.10. Path tool activated

  Path tool activated; click on path.

- Texto ao longo do vetor:

  This option is enabled only if a path exists. When your text is created, then create or import a path and make it active. If you create your path before the text, the path becomes invisible and you have to make it visible in the Paths dialog.

  The Text along path command is also available from the Layer menu in the main menu.

  The commands Discard Text Information, Text to Path, and Text along Path only appear in the Layer menu if a text layer is selected.

  Select the Text along Path option. The text is wrapped along the path. Letters are represented with their outline. Each of them is a component of the new path that appears in the Paths dialog.

  | Nota
  You can change the direction that the text is wrapped around the path by reversing the stroke direction when editing the path with the Path Tool. In the same way you can change at which anchor stroking starts.

  Figura 9.11. Exemplo de “Texto ao longo de vetor”

  By converting a text item to a selection or a path, you can fill it, stroke the outlines, transform it, or generally apply the whole panoply of GIMP tools to get interesting effects.

- From left to right, From right to left, Vertical, right to left (mixed orientation), Vertical, right to left (upright orientation), Vertical, left to right (mixed orientation), Vertical, left to right (upright orientation): These commands let you adjust the writing direction of the text.

7. Layer Types |  | 2. Text

Report a bug in GIMP Report a documentation error